Structure of dioctadecyl l-glutamide-derived lipid self-assembled monolayers on Au(1 1 1) surface

An l-glutamic acid-derived lipid with a terminal thiol has been synthesized and its corresponding self-assembled structure on Au(1 1 1) surfaces described. The surface morphology of the lipid self-assembled monolayer (SAM) exhibits nano-order patterning, where the height of the monolayer (approximately 1.5 nm) could be interpreted as due to the monolayer structure estimated from molecular models. The molecular orientation in the monolayer is almost perpendicular to the Au(1 1 1) surface depending on the three-point hydrogen-bonding sites in the molecule.     

Low temperature deposited Zr-B film applicable to extremely thin barrier for copper interconnect

We have prepared thin Zr-B films at low temperatures as a new material applicable to an extremely thin barrier against Cu diffusion in Si-ULSI metallization. The obtained Zr-B films mainly consist of the ZrB₂ phase with a nanocrystalline texture on SiO₂ and a fiber texture on Cu. The resistivity of the Zr-B films depends on the substrate of SiO₂ or Cu. The constituent ratio of B/Zr is almost 2, though the contaminants of oxygen, nitrogen, and carbon are incorporated in the film. The nanocrystalline structure of the Zr-B film on SiO₂ is stable due to annealing at temperatures up to 500 °C for 30 min. We applied the 3-nm thick Zr-B film to a diffusion barrier between Cu and SiO₂, and the stable barrier properties were confirmed. We can demonstrate that the thin Zr-B film is a promising candidate for thin film application to a metallization material in Si-ULSIs.     

Scanning ion conductance microscopy for imaging biological samples in liquid: a comparative study with atomic force microscopy and scanning electron microscopy

The present study was designed to show the applicability of scanning ion conductance microscopy (SICM) for imaging different types of biological samples. For this purpose, we first applied SICM to image collagen fibrils and showed the usefulness of the approach-retract scanning (ARS)/hopping mode for such samples with steep slopes. Comparison of SICM images with those obtained by AFM revealed that the ARS/hopping SICM mode can probe the surface topography of collagen fibrils and chromosomes at nanoscale resolution under liquid conditions. In addition, we successfully imaged cultured HeLa cells, with 15 μm in height by ARS/hopping SICM mode. Because SICM can obtain non-contact (or force-free) images, delicate cellular projections were visualized on the surface of the fixed cell. SICM imaging of live HeLa cells further demonstrated its applicability to study the morphological dynamics associated with biological processes on the time scale of minutes under liquid conditions. We further applied SICM for imaging the luminal surface of the trachea and succeeded in visualizing the surface of both ciliated and non-ciliated cells. These SICM images were comparable with those obtained by scanning electron microscopy. Although the dynamic mode of AFM provides better resolution than the ARS/hopping mode of SICM in some samples, only the latter can obtain contact-free images of samples with steep slopes, rendering it an important tool for observing live cells as well as unfixed or fixed soft samples with complicated shapes. Taken together, we demonstrate that SICM imaging, especially using an ARS/hopping mode, is a useful technique with unique capabilities for imaging the three-dimensional topography of a range of biological samples under physiologically relevant aqueous conditions.     

Characterization of attosecond XUV pulses from photoelectron spectra of atoms

A method to characterize attosecond extreme ultra violet (XUV) pulses from photoelectron spectra of atoms is presented. A pump pulse prepares a coherent superposition of two atomic bound states, from which photoionization takes place after variable time delays by the attosecond XUV pulse. Information on the spectral phase of the attosecond XUV pulse is extracted from the analysis of photoelectron spectra as a function of photoelectron energy and time delay. Together with information on the spectral intensity obtained from a separate optical measurement, a temporal shape of the attosecond XUV pulse can be precisely reconstructed. After the theoretical formulation of the problem, we present numerical examples for H atom and show that, depending on the choice of energy separation of two bound states, a different accuracy is reached to characterize attosecond XUV pulses.     

Effect of high pressure treatment on sarcoplasmic reticulum

Abstract

This paper describes the changes in biochemical activities of sarcoplasmic reticulum(SR) and Ca²⁺ release from SR in the rabbit skeletal muscle subjected to a high pressure treatment(100∽300 MPa) to investigate the mechanism for pressure-induced meat tenderization and acceleration of meat conditioning. Pressure-dependent changes were observed in the both extra and basal ATPase activities of SR prepared from the muscles exposed to high pressure. Ca²⁺ uptaking ability of SR vesicles measured by fluorescent chelating reagent, indo-1, decreased with increasing pressure applied to the muscle. Ultrastructural studies revealed that Ca²⁺ which was mainly localized in the SR region of the untreated fiber bundles was translocated into myofibrils in the pressurized muscle. Obtained results in this report may be one of the causes for meat tenderization and acceleration of meat conditioning induced by high pressure treatment.     

Magnesium K‐edge XANES spectroscopy of geological standards

Magnesium K‐edge X‐ray absorption near‐edge structure (XANES) spectra have been investigated to develop a systematic understanding of a suite of Mg‐bearing geological materials such as silicate and carbonate minerals, sediments, rocks and chemical reagents. For the model compounds the Mg XANES was found to vary widely between compounds and to provide a fingerprint for the form of Mg involved in geologic materials. The energy positions and resonance features obtained from these spectra can be used to specify the dominant molecular host site of Mg, thus shedding light on Mg partitioning and isotope fractionation in geologic materials and providing a valuable complement to existing knowledge of Mg geochemistry.     

Preparation of Y2O3:Eu thin films by excimer-laser-assisted metal organic deposition

Europium-doped yttrium oxide (Y₂O₃:Eu) thin films were successfully deposited on quartz and ITO/glass substrates by excimer-laser-assisted metal organic deposition (ELAMOD) at low temperatures. The effects of laser wavelength and thermal temperature on the films’ crystallinity and photoluminescence properties were investigated. Films irradiated by an ArF laser at 80 mJ/cm² and 400–500°C were highly crystallized compared with those prepared by thermal MOD. In contrast, when the film was irradiated by a KrF laser at 500°C, no crystalline Y₂O₃:Eu was formed. The Y₂O₃:Eu film irradiated by the ArF laser at 80 mJ/cm² and 500°C showed typical PL spectra of Eu³⁺ ions with cubic symmetry and a ⁵D₀→⁷F₂ transition at ∼612 nm. The PL intensity at 612 nm was much higher for the film prepared with ELAMOD than for that prepared by the thermal-assisted process, and the photoemission intensity of the film prepared with ELAMOD strongly depended on the substrate material.     

Characteristics of Gain-Guided Laser Diodes with Cylindrical-Mirror Cavity

We have developed highly reliable etched-mirror laser diodes using a dry etching method. The lasers without facet-coating have been operating stably over 2500 h under automatic-power control (APC) at a power of 3 mW/facet at 50°C. The gain-guided laser diodes with a cylindrical-mirror cavity (CMC) have coaxial mirrors and a fan-shaped stripe structure. By decreasing the curvature radius of the inner facet or increasing the stripe width of the inner facet, the beam waist parallel to the junction plane can be moved outside of the laser diode, while the beam waist perpendicular to the junction plane stops at the mirror facet. A particular CMC laser has a low astigmatism of 4.1 μm and a low relative intensity of noise (RIN) less than –134 dB/Hz at 4 mW under 0–1% optical feedback without high frequency current superposition.     

Electrical field analysis of metal‐surface plasmon resonance using a biaxially strained Si substrate

Electrical field components of metal‐surface plasmon resonance were analyzed in detail. Both longitudinal optical (LO) and transverse optical (TO) phonon modes of a biaxially strained Si layer can be excited by surface‐enhanced Raman spectroscopy (SERS). The z to y polarization ratio in SERS measurements was calculated to be 0.78 using the intensity ratio of TO to LO phonon modes. The electrical field components of SERS were also calculated by the finite‐difference time‐domain method. Copyright © 2014 John Wiley & Sons, Ltd.     

Molecular biology of histidine decarboxylase and prostaglandin receptors

Histamine and prostaglandins (PGs) play a variety of physiological roles as autacoids, which function in the vicinity of their sources and maintain local homeostasis in the body. They stimulate target cells by acting on their specific receptors, which are coupled to trimeric G proteins. For the precise understanding of the physiological roles of histamine and PGs, it is necessary to clarify the molecular mechanisms involved in their synthesis as well as their receptor-mediated responses. We cloned the cDNAs for mouse L-histidine decarboxylase (HDC) and 6 mouse prostanoid receptors (4 PGE(2) receptors, PGF receptor, and PGI receptor). We then characterized the expression patterns and functions of these genes. Furthermore, we established gene-targeted mouse strains for HDC and PG receptors to explore the novel pathophysiological roles of histamine and PGs. We have here summarized our research, which should contribute to progress in the molecular biology of HDC and PG receptors.