Integrated multidimensional and comprehensive 2D GC analysis of fatty acid methyl esters

Fatty acid methyl ester (FAME) profiling in complex fish oil and milk fat samples was studied using integrated comprehensive 2D GC (GC × GC) and multidimensional GC (MDGC). Using GC × GC, FAME compounds – cis‐ and trans‐isomers, and essential fatty acid isomers – ranging from C18 to C22 in fish oil and C18 in milk fat were clearly displayed in contour plot format according to structural properties and patterns, further identified based on authentic standards. Incompletely resolved regions were subjected to MDGC, with Cn (n = 18, 20) zones transferred to a ²D column. Elution behavior of C18 FAME on various ²D column phases (ionic liquids IL111, IL100, IL76, and modified PEG) was evaluated. Individual isolated Cn zones demonstrated about four‐fold increased peak capacities. The IL100 provided superior separation, good peak shape, and utilization of elution space. For milk fat‐derived FAME, the ²D chromatogram revealed at least three peaks corresponding to C18:1, more than six peaks for cis/trans‐C18:2 isomers, and two peaks for C18:3. More than 17 peaks were obtained for the C20 region of fish oil‐derived FAMEs using MDGC, compared with ten peaks using GC × GC. The MDGC strategy is useful for improved FAME isomer separation and confirmation.     

Radical Addition Reactions of α-Substituted β,β-Difluorovinyl Sulfones

The radical addition reactions of α-substituted β,β-difluorovinyl sulfones 1 with α-oxy and acyl radical species, such as 1,3-dioxolane, tetrahydrofuran, 1,4-dioxane, butanal and hexanal, afforded radical addition products 2--16 in good yields.     

CMOS image sensor for detection of interferon gamma protein interaction as a point-of-care approach

Complementary metal oxide semiconductor (CMOS)-based image sensors have received increased attention owing to the possibility of incorporating them into portable diagnostic devices. The present research examined the efficiency and sensitivity of a CMOS image sensor for the detection of antigen–antibody interactions involving interferon gamma protein without the aid of expensive instruments. The highest detection sensitivity of about 1 fg/ml primary antibody was achieved simply by a transmission mechanism. When photons are prevented from hitting the sensor surface, a reduction in digital output occurs in which the number of photons hitting the sensor surface is approximately proportional to the digital number. Nanoscale variation in substrate thickness after protein binding can be detected with high sensitivity by the CMOS image sensor. Therefore, this technique can be easily applied to smartphones or any clinical diagnostic devices for the detection of several biological entities, with high impact on the development of point-of-care applications.     

Catalytic combustion of chlorobenzene over V2O5/TiO2 catalysts prepared by the precipitation-deposition method

Catalytic combustion of chlorobenzene over supported vanadium oxides has been investigated. TiO₂ was prepared by the sol-gel method from titanium isopropoxide. The supported vanadium oxide catalysts have been prepared by precipitation-deposition and impregnation method and characterized by XRD, FT-Raman and TPR. In the VO_x/TiO₂catalysts prepared using the impregnation method, when vanadium loading reaches 3 wt.%, the activity shows a maximum. However, in the VO_x/TiO₂catalysts prepared by precipitation-deposition, when vanadium loading reaches 7 wt.%, the activity shows a maximum. This result suggests that the precipitation-deposition can yield a higher metal loading on the support and a high dispersion compared to the impregnation method. This revised version was published online in August 2006 with corrections to the Cover Date.     

Imidazolium ion-terminated self-assembled monolayers on Au: effects of counteranions on surface wettability

Self-assembled monolayers presenting imidazolium ions at the tail ends (SAMIMs) having different counteranions have been prepared on Au, and the measurement of water contact angles of the surfaces proved to be an extremely valuable simple technique for quantifying the effects of counteranions on hydrophilicity and hydrophobicity of SAMIMs, which will be extrapolated to the water miscibility of the related ionic liquids.     

Kinetics and mechanism of benzylamine additions to ethyl alpha-acetyl-beta-phenylacrylates in acetonitrile

Kinetic studies of the addition of benzylamines to a noncyclic dicarbonyl group activated olefin, ethyl alpha-acetyl-beta-phenylacrylate (EAP), in acetonitrile at 25.0 degrees C are reported. The rates are lower than those for the cyclic dicarbonyl group activated olefins. The addition occurs in a single step with concurrent formation of the Calpha-N and Cbeta-H bonds through a four-center hydrogen bonded transition state.The kinetic isotope effects (kH/kD > 1.0) measured with deuterated benzylamines (XC6H4CH2ND2) increase with a stronger electron acceptor substituent (deltasigmaX > 0) which is the same trend as those found for other dicarbonyl group activated series (1-4), but is in contrast to those for other (noncarbonyl) group activated series (5-9). For the dicarbonyl series, the reactivity-selectivity principle (RSP) holds, but for others the anti-RSP applies. These are interpreted to indicate an insignificant imbalance for the former, but substantial lag in the resonance delocalization in the transition state for the latter series.     

Metallic macrocycle with a 1,3-alternate calix[4]arene phosphorus ligand

The preparation of an 1,3-alternate calix[4]arene phosphorus ligand, 25,27-bis(2-(diphenylphosphino)ethoxy)-26,28-bis(1-propyloxy)calix[4]arene (3), is presented. Ligand 3 is obtained in three steps in 64% overall yield. Reaction of 3 with [Rh(cot)2]BF4 produced the encapsulated rhodium complex [Rh[(P,P)-diphen-calix[4]arene]]BF4 (4). As revealed by a single-crystal X-ray diffraction study, the rhodium center has a bent coordination environment with a P-Rh-P angle of 135.66(3) degrees. Palladation of 3 employing [Pd(MeCN)4](BF4)2 yielded the chelate palladium complex 7 in which the palladium center has a slightly bent configuration. Treatment of the ligand with Pd(cod)Cl2 and [Pd(eta3-C4H7)(THF)2]BF4 leads to the isolation of the monometallic complex. Full characterization includes X-ray structural studies of compounds 3, 4, and 6.     

Platinum-free tungsten carbides as an efficient counter electrode for dye sensitized solar cells

Mesoporous tungsten carbides displayed an excellent solar conversion efficiency (7.01%) as a counter electrode for dye sensitized solar cells under 100 mW cm(-2), AM 1.5G illumination, which corresponded to ca. 85% of the efficiency of the conventional platinum electrode.     

Large Porphyrin Squares from the Self‐Assembly of meso‐Triazole‐Appended L‐Shaped meso–meso‐Linked ZnII–Triporphyrins: Synthesis and Efficient Energy Transfer

meso‐Triazolyl‐appended Zn^II–porphyrins were readily prepared by Cu^I‐catalyzed 1,3‐dipolar cycloaddition of benzyl azide to meso‐ethynylated Zn^II–porphyrin (click chemistry). In noncoordinating CHCl₃ solvent, spontaneous assembly occurred to form tetrameric array ( 3 )₂ from meso–meso‐linked diporphyrins 3 , and dodecameric porphyrin squares ( 4 )₄ and ( 5 )₄ from the L ‐shaped meso–meso‐linked triporphyrins 4 and 5 . The structures of these assemblies were examined by ¹H NMR spectra, absorption spectra, and their gel permeation chromatography (GPC) retention time. Furthermore, the structures of the dodecameric porphyrin squares ( 4 )₄ and ( 5 )₄ were probed by small‐ and wide‐angle X‐ray scattering (SAXS/WAXS) measurements in solution using a synchrotron source. Excitation‐energy migration processes in these assemblies were also investigated in detail by using both steady‐state and time‐resolved spectroscopic methods, which revealed efficient excited‐energy transfer (EET) between the meso–meso‐linked Zn^II–porphyrin units that occurred with time constants of 1.5 ps^?1 for ( 3 )₂ and 8.8 ps^?1 for ( 5 )₄.