Some physical and magnetic properties of Mg‐Zn ferrite

Some physical properties (such as lattice parameter, density and porosity) and magnetic properties of the system Mg_1‐xZn_xFe₂O₄; where x=0,0.1,0.2,0.3,0.4,0.5and 0.6 have been studied. It was found that the lattice parameter increases with increasing the zinc concentration. The composition dependence of the physical properties is divided into two regions. The first one is for x ≤ 0.3 and the second one is for x > 0.3. From the magnetization measurements, the basic composition (MgFe₂O₄) shows the lowest magnetization, while the composition of x=0.4 shows the highest one. The behaviour of magnetization M versus composition shows also two regions for x <>0.3. The behaviour of M versus x was discussed in the bases of cation distribution. From the B‐H loops, the remanence induction B_r, saturation induction B_s and the coercive force H_c were determined and studied with x. The Curie temperature T_C was determined from the measurements of the initial permeability μ_i versus temperature. It was found T_C decreases with increasing Zn‐content. Also paramagnetic temperature T_P was determined from the behaviour of M_S vs. T. In general it was found T_P > T_C by about 7‐10 K.     

Graft polymerization of vinyl monomers onto cellulose in presence of soda lime glass. I

Sodium bisulfite–soda lime glass has proved to be a good initiator for polymerization and graft polymerization onto cellulose of some vinyl monomers. A scheme dealing with the mechanism of initiation has been proposed assuming trapping of the bisulfite radical inside the glass frame-work to form a so-called sulfur-impregnated solid. Such a solid has paramagnetic properties and acts on the vinyl monomers and cellulose as any free-radical-producing source thus leading to polymerization and graft polymerization onto cellulose. Other radicals containing sulfur, such as sulfite, sulfate, and persulfate failed to give such property with soda lime glass. With the sodium bisulfite–soda lime glass system the reactivity decreases in the order methyl methacrylate > ethyl acrylate > acrylonitrile which is inconsistent with the arrangement of acceptor monomers with decreasing electron-donating ability. This may reflect interference of the addition reaction which may take place between the monomer and bisulfite and the rate of which may depend on the activation energy of the monomer.     

Local structure of Cu in Cs8Na16Cu5Ge131 type II clathrate

We have used X-ray absorption spectroscopy (XAS) to investigate the local structure of Cu and Ge in the Cs₈Na₁₆Cu₅Ge₁₃₁ type II clathrate. We show that the local structure parameters for Ge (coordination number and distances) are consistent with those derived on the basis of XRD investigation of Cs₈Na₁₆Ge₁₃₆. The EXAFS data suggest that Cu either randomly substitutes for Ge on the clathrate framework or preferentially on the 96g site but not preferentially on the 32e or 8a sites (Wyckoff notation). Furthermore, we find that the Cu-Ge distance is smaller than the Ge-Ge distance by 0.13 Å, indicating a local distortion around the Cu atoms. The estimated degrees of disorder for Cu-Ge and Ge-Ge interactions indicate the Cu-Ge clathrate framework to be relatively stiff, while those for Na-Ge and Cs-Ge interactions corroborate previous observations of strong thermal disorder of the alkali guests in these materials. Our XAS results offer insight into the site substitution of Cu in this material, information unattainable from X-ray diffraction due to the lack of scattering contrast between Cu and Ge.     

Separation of Aliphatic and Aromatic Carboxylic Acids by Conventional and Ultra High-Performance Ion-Exclusion Chromatography

An ion-exclusion chromatography (IELC) comparison between a conventional ion-exchange column and an ultra high-performance liquid chromatography (UHPLC) dynamically surfactant modified C18 column for the separation of an aliphatic carboxylic acid and two aromatic carboxylic acids is presented. Professional software is used to optimize the conventional IELC separation conditions for acetylsalicylic acid and the hydrolysis products: salicylic acid and acetic acid. Four different variables are simultaneously optimized including H₂SO₄ concentration, pH, flow rate, and sample injection volume. Thirty different runs are suggested by the software. The resolutions and the time of each run are calculated and feed back to the software to predict the optimum conditions. Derringer’s desirability functions are used to evaluate the test conditions and those with the highest desirability value are utilized to separate acetylsalicylic acid, salicylic acid, and acetic acid. These conditions include using a 0.35 mM H₂SO₄ (pH 3.93) eluent at a flow rate of 1 mL min^?1 and an injection volume of 72 μL. To decrease the run time and improve the performance, a UHPLC C18 column is used after dynamic modification with sodium dodecyl sulfate. Using pure water as a mobile phase, a shorter analysis time and better resolution are achieved. In addition, the elution order is different from the IELC method which indicates the contribution of the reversed-phase mode to the separation mechanism.     

Relationships between equilibrium spreading pressure and phase equilibria of phospholipid bilayers and monolayers at the air-water interface

The intricate interplay between the bilayer and monolayer properties of phosphatidylcholine (PC), phosphatidylglycerol (PG), and phosphatidylethanolamine (PE) phospholipids, in relation to their polar headgroup properties, and the effects of chain permutations on those polar headgroup properties have been demonstrated for the first time with a set of time-independent bilayer-monolayer equilibria studies. Bilayer and monolayer phase behavior for PE is quite different than that observed for PC and PG. This difference is attributed to the characteristic biophysical PE polar headgroup property of favorable intermolecular hydrogen-bonding and electrostatic interactions in both the bilayer and monolayer states. This characteristic hydrogen-bonding ability of the PE polar headgroup is reflected in the condensed nature of PE monolayers and a decrease in equilibrium monolayer collapse pressure at temperatures below the monolayer critical temperature, T(c) (whether above or below the monolayer triple point temperature, T(t)). This interesting phenomena is compared to equilibrated PC and PG monolayers which collapse to form bilayers at 45 mN/m at temperatures both above and below monolayer T(c). Additionally, it has been demonstrated by measurements of the equilibrium spreading pressure, pie, that at temperatures above the bilayer main gel-to-liquid-crystalline phase-transition temperature, T(m), all liquid-crystalline phospholipid bilayers spread to form monolayers with pie around 45 mN/m, and spread liquid-expanded equilibrated monolayers collapse at 45 mN/m to form their respective thermodynamically stable liquid-crystalline bilayers. At temperatures below bilayer T(m), PC and PG gel bilayers exhibit a drop in bilayer pi(e) values < or =0.2 mN/m forming gaseous monolayers, whereas the value of pic of spread monolayers remains around 45 mN/m. This suggests that spread equilibrated PC and PG monolayers collapse to a metastable liquid-crystalline bilayer structure at temperatures below bilayer T(m) (where the thermodynamically stable bilayer liquid-crystalline phase does not exist) and with a surface pressure of 45 mN/m, a surface chemical property characteristically observed at temperatures above bilayer T(m) (monolayer T(c)). In contrast, PE gel bilayers, which exist at temperatures below bilayer T(m) but above bilayer T(s) (bilayer crystal-to-gel phase-transition temperature), exhibit gel bilayer spreading to form equilibrated monolayers with intermediate pie values in the range of 30-40 mN/m; however, bilayer pie and monolayer pic values remain equal in value to one another. Contrastingly, at temperatures below bilayer T(s), PE crystalline bilayers exhibit bilayer pie values < or =0.2 mN/m forming equilibrated gaseous monolayers, whereas spread monolayers collapse at a value of pic remaining around 30 mN/m, indicative of metastable gel bilayer formation.     

Dielectric relaxation of ball-like labels in polyisoprene

Ball-like molecules with strong dipoles (labels) were mixed with synthetic polyisoprene (IR305) in low concentrations (<1%) and measured dielectrically in the frequency range 10^–2–10⁷ Hz and the temperature range –70–0°C (glass relaxation region). Calorimetric measurements showed that this type of label has a plasticizing effect on the polymeric matrix. The dielectric measurements showed that these ball-like molecules relax through cooperative rotations with the polymeric segments and at the same relaxation frequency. In addition, the label molecules showed a high-frequency local relaxation process. The relaxation strength ratio of the local process (X _local) to the total relaxation strength of the label was found to be dependent on the volume as well as on the shape of the label. A comparison between the relaxation behaviors of the ball-and rod-like molecules, having the same volume, showed that the length of the label is also an important parameter for the determination of the local contribution as well as of the cooperative relaxation mechanism of the label. The label relaxation process is discussed in relation to the molecular packing of the host polymer.     

Phytochemical Profiling of Lavandula coronopifolia Poir. Aerial Parts Extract and Its Larvicidal,Antibacterial, and Antibiofilm Activity Against Pseudomonas aeruginosa

Infections associated with the emergence of multidrug resistance and mosquito-borne diseases have resulted in serious crises associated with high mortality and left behind a huge socioeconomic burden. The chemical investigation of Lavandula coronopifolia aerial parts extract using HPLC–MS/MS led to the tentative identification of 46 compounds belonging to phenolic acids, flavonoids and their glycosides, and biflavonoids. The extract displayed larvicidal activity against Culex pipiens larvae (LC₅₀ = 29.08 µg/mL at 72 h). It significantly inhibited cytochrome P-450 monooxygenase (CYP450), acetylcholinesterase (AChE), and carboxylesterase (CarE) enzymes with the comparable pattern to the control group, which could explain the mode of larvae toxification. The extract also inhibited the biofilm formation of Pseudomonas aeruginosa by 17–38% at different Minimum Inhibitory Concentrations (MICs) (0.5–0.125 mg/mL) while the activity was doubled when combined with ciprofloxacin (ratio = 1:1 v:v). In conclusion, the wild plant, L. coronopifolia, can be considered a promising natural source against resistant bacteria and infectious carriers.     

Strength of interactions between immobilized dye molecules and sol-gel matrices

In this paper we present a new theory to re-examine the immobilization technique of dye doped sol-gel films, define the strength and types of possible bonds between the immobilized molecule and sol-gel glass, and show that the immobilized molecule is not free inside the pores as was previously thought. Immobilizing three different pH sensitive dyes with different size and functional groups inside the same sol-gel films revealed important information about the nature of the interaction between the doped molecule and the sol-gel matrix. The samples were characterized by means of ultraviolet-visible spectrophotometer (UV-VIS), thermal gravimetric analysis (TGA), mercury porosimetry (MP), nuclear magnetic resonance spectroscopy ((29)Si NMR) and field-emission environmental scanning electron microscopy (ESEM-FEG). It was found that the doped molecule itself has a great effect on the strength and types of the bonds. A number of factors were identified, such as number and types of the functional groups, overall charge, size, pK(a) and number of the silanol groups which surround the immobilized molecule. These results were confirmed by the successful immobilization of bromocresol green (BCG) after a completely polymerized sol-gel was made. The sol-gel consisted of 50% tetraethoxysilane (TEOS) and 50% methyltriethoxysilane (MTEOS) (w/w). Moreover, the effect of the immobilized molecule on the structure of the sol-gel was studied by means of a leaky waveguide (LW) mode for doped films made before and after polymerization of the sol-gel.     

Optical properties of nanostructure boron doped NiO thin films

Boron doped NiO films were prepared by sol–gel method. The effects of B content on the morphological and optical properties of NiO films were studied with atomic force microscopy, and optical characterization method. The average transmittance at the visible region is reached to 75 % for lower doped films (0.1 and 0.2 % B), whereas, the recorded average value of transmittance was about 62 % for doped film with 1 % B throughout the region. The optical energy gap value for pure NiO film was found to be 3.73 eV. These values were affected by B doping with non-monotonic variation and reached to 3.64 eV for 0.1 % B doped NiO. Also, the refractive index dispersion and dielectric constants of the NiO films were studied throughout the investigated range of wavelengths. The obtained results indicate that the optical parameters of the NiO film are controlled with boron doping.