Validated Method for the Simultaneous Determination of Lisinopril,Pravastatin, Atorvastatin and Rosuvastatin in API,Formulations and Human Serum by RP‐HPLC

Lisinopril is found to be useful in hypertension and statins as cholesterol lowering drug. Present work was designed for the simultaneous determination of lisinopril in presence of pravastatin, atorvastatin, and rosuvastatin using RP‐HPLC method. A Purospher star C18 (5 μm, 25×0.46 cm) column was used with mobile phase consisting of acetonitrile:water (60:40 V/V, pH 3.0) with flow rate of 1.0 mL·min^?1 and the quantitative evaluation was performed at 225 nm. The retention time of lisinopril was 2.0 min and for pravastatin, rosuvastatin and atorvastatin was found to be 3.1, 4.5 and 8.3 min respectively. Suitability of this method for the quantitative determination of the drugs was proved by validation in accordance with the requirements laid down by International Conference on Harmonization (ICH) guidelines. Application of the suggested procedures were successfully applied to the determination of these compounds in active pharmaceutical ingredient and in pharmaceutical preparations, with high percentage of recovery, good accuracy and precision.     

Impact of Membrane Types and Catalyst Layers Composition on Performance of Polymer Electrolyte Membrane Fuel Cells

Performance of a low temperature polymer electrolyte membrane fuel cell (PEMFC) is highly dependent on the kind of catalysts, catalyst supports, ionomer amount on the catalyst layers (CL), membrane types and operating conditions. In this work, we investigated the influence of membrane types and CL compositions on MEA performance. MEA performance increases under all practically relevant load conditions with reduction of the membrane thickness from 50 to 15 μm, however further decrease in membrane thickness from 15 to 10 μm leads to reduction in cell voltage at high current loads. A thick anode CL is found to be beneficial under wet operating conditions assuming more pore space is provided to accommodate liquid water, whereas under dry operating conditions, an intermediate thickness of the anode CL is beneficial. When studying the impact of catalyst layer thickness, too thin a catalyst layer again shows reduced performance due to increased ohmic resistance ruled out the performance of the MEAs which have identical Pt crystallite sizes on the cathode CLs i. e. the thinnest the cathode CL, the highest the voltage were achieved at a defined current load. Adaptation of the operating conditions is highly anticipated to achieve the highest MEA performance.     

Liquid chromatographic method for the simultaneous determination of captopril,piroxicam, and amlodipine in bulk drug,pharmaceutical formulation,and human serum by programming the detector

A highly sensitive LC method with UV detection has been developed for the simultaneous determination of coadministered drugs captopril, piroxicam, and amlodipine in bulk drug, pharmaceutical formulations, and human serum at the isosbestic point (235 nm) and at individual λ_max (220, 255, and 238 nm, respectively) by programming the detector with time to match the individual analyte's chromophore, which enhanced the sensitivity with linear range. The assay involved an isocratic elution of analytes on a Bondapak C₁₈ (10 μm, 25 × 0.46 cm) column at ambient temperature using a mobile phase of methanol/water 80:20 at pH 2.9 and a flow rate of 1.0 mL/min. Linearity was found to be 0.25–25, 0.10–6.0, and 0.20–13.0 μg/mL with correlation coefficient >0.998 and detection limits of 7.39, 3.90, and 9.38 ng/mL, respectively, whereas calibration curves for wavelength‐programmed analysis were 0.10–6.0, 0.04–2.56, and 0.10–10.0 μg/mL with correlation coefficient >0.998 and detection limits of 5.79, 2.68, and 3.87 ng/mL, respectively. All the validated parameters were in the acceptable range. The recovery of drugs was 99.32–100.39 and 98.65–101.96% in pharmaceutical formulation and human serum, respectively, at the isosbestic point and at individual λ_max. This method is applicable for the analysis of drugs in bulk drug, tablets, serum, and in clinical samples without interference of excipients or endogenous serum components.     

Comparison of ground and excited state polarizabilities of thiophene,cyclopentadiene, and fulvene oligomers and their cyano substituted derivatives—Ab initio study

Ab Initio study of the ground and excited state polarizabilities of thiophene, fulvene, and cyclopentadiene based conducting oligomers and their cyano derivatives have been performed using the restricted Hartree–Fock (RHF) and the configuration interaction singles (CIS) approaches, respectively, with 3‐21G* basis set. For comparison purposes, for some small oligomers (monomers and dimers), higher basis sets (6‐31G*, 6‐31+G*, aug‐cc‐pVTZ) were also employed in the computations of polarizabilities. The trends in polarizability as a function of oligomer length were investigated. For all systems, the RHF polarizability increases as n^1.2–1.3 as n gets larger and the CIS polarizability increases as n^1.4–1.6 for n less than seven or eight rings and then increases approximately linearly with n for larger n. For the thiophene based systems the dependence of the polarizability on bond length alternation (BLA) along the backbone of the oligomers was also investigated using the RHF, density functional (DFT), and CIS theories (with 3‐21G* basis set). For thiophene dimer, we also performed RHF/aug‐cc‐pVTZ calculations of polarizabilities versus BLA. We found that the polarizability is largest when BLA is near zero (for both ground and excited states), which correlates with the lowest excitation energy. Comparison with experimental results has been made where possible. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1983–1995, 2007     

Antioxidant,Anti-Obesity,Nutritional and Other Beneficial Effects of Different Chili Pepper: A Review

Fruits and vegetables are important components of a healthy diet. They are rich sources of vitamins and minerals, dietary fibre and a host of beneficial non-nutrient substances including plant sterols, flavonoids and other antioxidants. It has been reported that reduced intake of fruits and vegetables may increase the risk of non-communicable diseases (NCDs). Chili pepper, is a common and important spice used to enhance taste and nutrition. Over the years, reports have shown its potential as antioxidant and an anti-obesity agent. Obesity is a serious health concern as it may initiate other common chronic diseases. Due to the side effects of synthetic antioxidants and anti-obesity drugs, scientists are now focusing on natural products which produce similar effects to synthetic chemicals. This up-to-date review addresses this research gap and presents, in an accessible format, the nutritional, antioxidant and anti-obesity properties of different chili peppers. This review article serves as a reference guide for use of chili peppers as anti-obesity agents.     

Polarity Directed Appraisal of Pharmacological Potential and HPLC-DAD Based Phytochemical Profiling of Polygonum glabrum Willd

The present study was designed to evaluate polarity-dependent extraction efficiency and pharmacological profiling of Polygonum glabrum Willd. Crude extracts of leaves, roots, stems, and seeds, prepared from solvents of varying polarities, were subjected to phytochemical, antioxidant, antibacterial, antifungal, antidiabetic, and cytotoxicity assays. Maximum extraction yield (20.0% w/w) was observed in the case of an acetone:methanol (AC:M) root extract. Distilled water:methanol (W:M) leaves extract showed maximum phenolic contents. Maximum flavonoid content and free radical scavenging potential were found in methanolic (M) seed extract. HPLC-DAD quantification displayed the manifestation of substantial quantities of quercetin, rutin, gallic acid, quercetin, catechin, and kaempferol in various extracts. The highest ascorbic acid equivalent total antioxidant capacity and reducing power potential was found in distilled water roots and W:M leaf extracts, respectively. Chloroform (C) seeds extract produced a maximum zone of inhibition against Salmonella typhimurium. Promising protein kinase inhibition and antifungal activity against Mucor sp. were demonstrated by C leaf extract. AC:M leaves extract exhibited significant cytotoxic capability against brine shrimp larvae and α-amylase inhibition. Present results suggest that the nature of pharmacological responses depends upon the polarity of extraction solvents and parts of the plant used. P. glabrum can be considered as a potential candidate for the isolation of bioactive compounds with profound therapeutic importance.     

Pefloxacinium methane­sulfonate 0.10‐hydrate

The crystal structure of 4‐(3‐carboxy‐1‐ethyl‐6‐fluoro‐1,4‐di­hydro‐4‐oxo‐7‐quinolyl)‐1‐methyl­piperazinium methane­sulfonate 0.10‐hydrate, C₁₇H₂₁FN₃O₃⁺·CH₃O₃S^?·0.10H₂O, contains pefloxacinium cations, methane­sulfonate anions and a partially occupied water of solvation. The quinoline ring system in the cation is essentially planar. The anions lie parallel to each other about inversion centers. The structure is stabilized by strong hydrogen bonds involving the terminal piperazinyl‐N atom of the cation and an O atom of the anion [N?O 2.739 (2) Å], and a strong intramolecular hydrogen bond between carbonyl and carboxyl groups [O?O 2.523 (2) Å].     

Electrical properties of V2O5-doped TlI

This paper reports the effect of heterogeneously doped vanadia on the ionic conductivity of thallium iodide (TlI). These compounds have been prepared and studied by X-ray diffraction, differential scanning calorimetry, scanning electron microscopy and electrical conductivity. The materials were found to be binary phase systems with the vanadia particles dispersed in the grains of TlI. The electrical conductivity shows an upward trend in the composition range x=0.1–0.5; however, with further increase in vanadia content, conductivity decreases. This behavior is attributed to disordering phenomena at interface boundaries and space-charge layers formed in the bulk grains of TlI. In addition to this, the increased content of vanadia in the system leads to the disappearance of the β?α phase transition of TlI, which is usually observed in the pure compound.