Microstructure,Tribological Behavior,and Corrosion-Resistant Performance of Bonded MoS2 Solid Lubricating Film Filled with Nano-LaF3

The anti-friction and wear-resistant performances of bonded MoS₂ solid lubricating films filled with nano-LaF₃ filler were investigated under in drying wear conditions, the corrosion-resistant performances of bonded lubricating films was evaluated according to ASTM-B117, and the characteristics of the bonded lubricating films were examined by TEM and elemental x-ray map. The wear-resistant performance of the bonded lubricating films filled with nano-LaF₃ filler increases with increasing content of nano-LaF₃ filler within a content range between 0 and 5 wt%, whereas the bonded lubricating films filled with 0.5–1 wt% micro-LaF₃ filler exhibit the better wear-resistant performances. The incorporation of both nano-LaF₃ and micro-LaF₃ filler leads the increase of the coefficient of friction of the bonded lubricating films. The LaF₃ filler can improve the corrosion-resistant performance of the bonded MoS₂ solid lubricating films, whereas the incorporation of nano-LaF₃ filler is more effective to improve the corrosion-resistant performance of the bonded lubricating films than micro-LaF₃ filler. The improvement in the wear-resistant and corrosion-resistant performances of the bonded lubricating films by the incorporation of the nano-LaF₃ filler is attributed to the strengthened interfacial bonding among the nano-LaF₃ and the MoS₂ lubricant and the polymeric matrix. However, a too high mass fraction of the nano-LaF₃ filler in the bonded lubricating films will increase surface and interface defects, and lead the worsening of corrosion-resistant performance of the bonded lubricating films.     

General Route to Synthesize Monodisperse Oxide (Hydroxide) Nanoparticles

Mono-dispersed oxide and hydroxide nanoparticles have been synthesized through the solvothermal process in alcohol-water mixtures. The products were characterized by powder x-ray diffraction (XRD) and scanning electron microscopy (SEM). Plate-like nanoparticles are obtained for Bi₂O_2.33, Fe₂O₃, and Cd(OH)₂, and spherical nanoparticles are obtained for SnO₂. The growth mechanism for the mono-dispersed nanoparticles has been preliminarily discussed.     

Fluorescent staining of protein in SDS polyacrylamide gels by salicylaldehyde azine

As a noncovalent fluorescence probe, in this study, salicylaldehyde azine (SA) was introduced as a sensitive fluorescence‐based dye for detecting proteins both in 1D and 2D polyacrylamide electrophoresis gels. Down to 0.2 ng of single protein band could be detected within 1 h, which is similar to that of glutaraldehyde‐silver stain, but approximately four times higher than that of SYPRO Ruby fluorescent stain. Furthermore, comparative analysis of the MS compatibility of SA stain with SYPRO Ruby stain indicated that SA stain is compatible with the downstream of protein identification by LC‐MS/MS. Additionally, the probable mechanism of the SA stain was investigated by molecular docking. The results demonstrated that the interaction between SA and protein was mainly contributed by hydrogen bonding and hydrophobic forces.     

Preparation and characterization of a polystyrene/bovine serum albumin nanoparticle‐coated capillary for chiral separation using open‐tubular capillary electrochromatography

Polystyrene (PS) nanoparticles coated by BSA, hereafter denoted as PS/BSA, were prepared and chemically immobilized for the first time onto a capillary inner wall for open‐tubular CEC (OTCEC). EOF and scanning electron micrography were used to characterize the prepared nanoparticle‐coated capillaries. To investigate the performance of the prepared columns in OTCEC, chiral separation of d ,l ‐tryptophan (dl ‐Trp) was performed in monolayer BSA‐modified capillary and PS/BSA nanoparticle‐coated columns. The results indicated that the nanoparticle‐modified column afforded a higher resolution compared with the monolayer type. Rapid enantioseparation of dl ‐Trp (within 3 min) was achieved with the PS/BSA‐immobilized column using an electroosmotic pump‐assisted CEC. Enantiomer separations of other compounds like dl ‐tyrosine and warfarin were also achieved with the column. Besides, run‐to‐run and column‐to‐column repeatabilities of the PS/BSA‐coated column in the chiral separation were systematically introduced.     

Application of Polyglycerol Diisostearate Ethoxylates in Microemulsion

Effect of surfactants [polyglycerol diisostearate ethoxylates (PGDIS-E31, PGDIS-E36 and PGDIS-E40) and Tween-80], alcohols (1,2-propandiol, ethanol, 1-propanol, 1-butanol, 2-butanol and 1-pentanol), oils [isopropyl palmitate (IPP), isooctyl palmitate (IOP), dioctyl carbonate (DOC), and dioctyl hexanediate (DOH)], temperature and sodium chloride on the microemulsion formation of the surfactant/alcohol/oil/water system has been investigated by the pseudo-ternary phase diagrams. The capacities of the four surfactants in the microemulsion formation of the surfactant/alcohol/IPP/water system at surfactant/alcohol of 2:1 are in the order of PGDIS-E31 > PGDIS-E36 > Tween-80 > PGDIS-E40, whatever alcohol (ethanol, 1-propanol, and 1-butanol) is used. PGDIS-E31 and 1-butanol exhibit best synergism in the microemulsion formation. In addition, the volume, structure and polarity of oil all influence the microemulsion formation. At the optimum weight ratio 2:1 of PGDIS-E31/1-butanol, the microemulsion region of the PGDIS-E31/1-butanol/IPP/water system is the largest among the studied systems. The microemulsion system of PGDIS-E31/1-butanol/IPP/water is not sensitive to lower temperature such as 40°C. It is also not sensitive to sodium chloride when the concentration of sodium chloride is in the range of 0 to 1.0%.     

The Influences of Polymers and Temperature on the Foam Properties of 3‐Dodecylalkoxyl‐2‐hydroxylpropyl Trimethylammonium Chloride

The foam performances of 3‐dodecoxy‐2‐hydroxypropyl trimethylammonium chloride (C₁₂TAC) have been determined in the existence of different relative amount of polymer. The experimental results show that the foaming ability of the mixture systems of the C₁₂TAC/PEG and C₁₂TAC/PVP is stronger than that of the surfactant solutions in the absence of polymer, and with the increase of relative amount of polymer both foaming efficiency and foam stability of the surfactant solutions are evidently enhanced. For the aqueous solution of the surfactant, effect of temperature on foaming properties has also been examined. The results show that both the foaming ability and stability of the foams of the surfactant solutions are highest (or strongest) at 30°C.     

Preparation and Characterization of the Hybrids Containing Silica Nanoparticles by Sol-Gel Crosslinking Process

The organic/inorganic hybrid nanomaterials containing silica nanoparticles are synthesized by sol-gel crosslinking process. The tetraethoxysilane (TEOS) and γ-aminopropyltriethoxylsilane as coupling agents are used as a precursor. The 2,4,6-tri [(2-epihydrin-3-bimethyl-ammonium)propyl]-1,3,5-triazine chloride (Tri-EBAC) as crosslinking agent is used to form covalent bonds among the inorganic nanoparticles. The chemical and morphological structures of the organic/inorganic hybrid are characterized with FTIR spectra, ²⁹Si-NMR, x-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and atomic force microscope (AFM). The results show that the organic/inorganic hybrid forms covalent bond between the inorganic nanoparticle and Tri-EBAC. The network organic/inorganic hybrid can form good film with even nanometer particles. The network organic/inorganic hybrids nanomaterial not only exhibits the thermal properties of inorganic compounds, but also exhibits the thermal properties of organic polymer.     

Surface-Modified Sb2S3 Nanoparticles and Their Tribological Behaviors in Liquid Paraffin

Sb₂S₃ nanoparticles surface-modified with S-tetradecyl N, N-dihydroxyethyl dithiocarbamate (C₁₄DTC-Sb₂S₃) have been synthesized via extraction of Sb₂S₃ colloidal particles from ethylene glycol into toluene in the presence of C₁₄DTC. The obtained products were characterized by high-resolution transmission electron microscope (HRTEM) and Fourier transformation infrared (FTIR), and their tribological behaviors as an additive in liquid paraffin were investigated using a four-ball tribometer. The results show that C₁₄DTC-Sb₂S₃ nanoparticles can significantly improve the friction reduction, anti-wear, and load-carrying properties of base oils. The preliminary lubrication mechanism was discussed based on the SEM and XPS investigation of the rubbed surfaces.     

Plutonium-239 sorption and transport on/in unsaturated sediments: comparison of batch and column experiments for determining sorption coefficients

Sorption (distribution) coefficients of plutonium were most often derived by static batch experiments. However, it is not clear how unsaturated flow conditions including moisture content and pore water velocity change the sorption coefficients. Transport experiments of plutonium through the unsaturated sediments packed into the columns were then performed in order to determine the sorption coefficients (column-K _ds). Static batch experiments were also conducted to obtain batch-K _ds and then compare the differences between batch-K _ds and column-K _ds. The results show that unsaturated flow conditions had no significant effect on column-K _ds, and the average column-K _d value was 1.74 ± 0.02 m³/kg. By comparison, batch-K _d values spanned several orders of magnitude, regardless of the specified liquid–solid conditions. Moreover, the batch-K _d (22.7 m³/kg) at the standard L/S (4 mL/g) recommended by ASTM D 4319 was over an order of magnitude larger than the average column-K _d.     

仿生制备有机-无机复合微囊固定化葡萄糖氧化酶

将层层自组装技术与仿生矿化技术相结合,由聚苯乙烯磺酸钠、聚二甲基二烯丙基氯化铵和二氧化硅成功制备(聚苯乙烯磺酸钠-聚二甲基二烯丙基氯化铵)₂-二氧化硅复合微囊.采用扫描电子显微镜、红外光谱和热重对微囊的形貌和化学结构进行了表征.以该复合微囊作为理想载体固定化葡萄糖氧化酶.结果表明,固定于复合微囊中的葡萄糖氧化酶的热稳定性、pH稳定性、操作稳定性得到了提高;在最适条件下,复合微囊固定化葡萄糖氧化酶的酶活回收率为72.85%,米氏常数是游离葡萄糖氧化酶的2.21倍.复合微囊在化学/生物催化、药物/基因传递系统和生物传感器应用方面具有一定的潜能.