Green microfluidic devices made of corn proteins

An alternative green microfluidic device made of zein, a prolamin of corn, can be utilized as a disposable environmentally friendly microchip especially in agriculture applications. Using standard soft lithography and stereo lithography techniques, we fabricated thin zein films with microfluidic chambers and channels. These were bonded to both a glass slide and another zein film. The zein film with microfluidic features bonds irreversibly with other surfaces by vapor-deposition of ethanol to create an adhesive layer resulting in very little or no trapped air and small shape distortion. Zein-zein and zein-glass microfluidic devices demonstrated sufficient strength to facilitate fluid flow in a complex microfluidic design that showed no leakage under high hydraulic pressure. Zein-glass microfluidic devices with serpentine mixing design showed successful fluid manipulation as a concentration gradient of Rhodamine B solution was generated. The ease of fabrication and bonding and the flexibility and moldability of zein offer attractive possibilities for microfluidic device design and manufacturing. These devices can include several unit operations with mixing being one of the most commonly used. The zein-based microfluidic devices, made entirely from a biopolymer from agricultural origin, offer alternative environmentally friendly material choices that are less dependent on limited petroleum based polymer resources.     

Stability of Concentrated Olive Oil‐in‐water Emulsion

The stability of olive oil-in-water (o/w) emulsion stabilized with sucrose fatty acid ester (SFAE) was evaluated through an accelerated ageing test. The stability of the emulsion in this study was examined by the appearance of any phase separation in the emulsion, mean droplet size and rheological properties over one month. The effect of accelerated ageing at 45 ℃ on the emulsion rheological properties was investigated using an amplitude sweep test, a frequency sweep test and a viscometry test. The rheological properties of the emulsion were examined at the one day, one week and one month of storage time. Among the series of emulsions prepared, the emulsion with 2∶8 of water to oil ratio (by weight) is the most stable one, which did not show any of phase separation. The amplitude sweep result shows that there was no significant change of the critical strain of the emulsion throughout one month of storage time. The dynamic properties as well as the steady flow behavior of the emulsion also show no significant changes for over one month of storage time. The mean droplet size of the emulsion remained stable around 2.5 μm within the period of investigation.     

Silver‐Assisted Chemical Etching on Silicon with Polyvinylpyrrolidone‐Mediated Formation of Silver Dendrites

Metal‐assisted chemical etching (MaCE) on silicon (Si)—mediated by polyvinylpyrrolidone (PVP)—is systematically investigated herein. It is found that the morphologies and crystallographic natures of the grown silver (Ag) dendrites can be significantly modulated, with the presence of PVP in the MaCE process leading to the formation of faceted Ag dendrites preferentially along the (111) crystallographic phase, rather than along the (200) phase. Further explorations of the PVP‐mediated effect on Si etching are also revealed. In contrast to the aligned Si nanowires formed by MaCE without PVP addition, only distributed nanopores with sizes of 200 to 400 nm appear on the Si surfaces in the presence of PVP. The origin of surface polishing on Si in the PVP‐mediated MaCE process can be attributed to the distinct transport pathway of holes supplied by the Ag⁺ ions, where the holes are injected directly into the primary Ag seeds, rather than through Ag dendrites, thus leading to the isotropic etching of the Si surface.     

Application of a multivariate approach for analyte focusing by micelle collapse‐micellar electrokinetic chromatography for analyzing sunscreen agents in cosmetics

The operating parameters that affect the performance of the online preconcentration technique “analyte focusing by micelle collapse‐MEKC (AFMC‐MEKC)” were examined using a multivariate approach involving experimental design to determine the sunscreen agents in cosmetics. Compared to the single‐variable approach, the advantage of the multivariate approach was that many factors could be investigated simultaneously to obtain the best separation condition. A fractional factorial design was used to identify the fewest significant factors in the central composite design (cCD). The cCD was adopted for evaluating the location of the minimum or maximum response in this study. The influences of the experimental variables on the response were investigated by applying a chromatographic exponential function. The optimized condition and the relationship between the experimental variables were acquired using the JMP software. The ANOVA analysis indicated that the Tris pH value, SDS concentration, and ethanol percentage influenced the separation quality and significantly contributed to the model. The optimized condition of the running buffer was 10 mM Tris buffer (pH 9.5) containing 60 mM SDS, 7 mM γ‐CD, and 20% v/v ethanol. The sample was prepared in 100 mM Tris buffer (pH 9.0) containing 7.5 mM SDS and 20% v/v ethanol. The SDS concentration in the sample matrix was slightly greater than the CMC value that makes the micelle be easily collapsed and the analytes be accumulated in the capillary. In addition, sunscreen agents in cosmetics after 1000‐fold dilution were successfully determined by AFMC‐MEKC.     

Development and validation of an ELISA kit for the detection of ricin toxins from biological specimens and environmental samples

Ricin is a toxin that can be easily extracted from seeds of Ricinus communis plants. Ricin is considered to be a major bio-threat as it can be freely and easily acquired in large quantities. A deliberate release of such toxin in civilian populations would very likely overwhelm existing public health systems, resulting in public fear and social unrest. There is currently no commercially available or FDA-approved prophylaxis such as vaccines, or therapeutic antitoxins or antidotes, available for ricin intoxication. Patient treatment is typically supportive care based on symptoms, often designed to reinforce the body’s natural response. This paper describes the development and validation of a robust ELISA test kit, which can be used to screen for ricin in biological specimens such as whole blood and faeces. Faecal specimens are shown in this study to have better diagnostic sensitivity and a wider diagnostic window compared to whole blood. From these results, it is concluded that faeces is the most suitable clinical specimen for diagnosis of ricin poisoning via the oral route. The ELISA test kit can also detect ricin in environmental samples. An advantage of this ELISA kit over other commercial off-the-shelf (COTS) detection kits currently on the market that are developed to screen environmental samples only is its ability to diagnose ricin poisoning from clinical specimens as well as detect ricin from environmental samples.     

Structure Evolution upon Uniaxial Drawing Skin‐ and Core‐Layers of Injection‐Molded Isotactic Polypropylene by In Situ Synchrotron X‐ray Scattering

The structure evolution of the oriented layer (skin) and unoriented layer (core) from injection‐molded isotactic polypropylene samples upon uniaxial drawing is probed by in situ synchrotron X‐ray scattering. The X‐ray data analysis approach, called “halo method”, is used to semiquantitatively identify the transformation process of crystal phase upon uniaxial drawing. The results verify the validation of the stress‐induced crystal fragmentation and recrystallization process in the deformation of the injection‐molded samples under different temperatures. Furthermore, the end of strain softening region in the engineering stress‐strain curves explicitly corresponds to the transition point from the stress‐induced crystal fragmentation to recrystallization process. Basically, the skin and core layers of the injection‐molded parts share the similar deformation mechanism as aforementioned. The stretching temperature which dramatically affects the relative strength between the entanglement‐induced tie chains and the adjacent crystalline lamellae determines the crystal structural evolution upon drawing. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1618–1631     

One-pot synthesis of hollow Au3Cu1 spherical-like and biomineral botallackite Cu2(OH)3Cl flowerlike architectures exhibiting antimicrobial activity

A new form of Au3Cu1 hollow nanostructure was prepared by the reaction of Cu nanoparticles with HAuCl4. Following a course of aging, the biomineral botallackite Cu2(OH)3Cl nanoflowers were developed with the aid of Au3Cu1 hollow nanostructures at room temperature. It was proposed that the hollow nanospheres could serve as active centers for heterogeneous nucleation and mediated a mineralization process. Scanning electron microscopy and high-resolution transmission electron microscopy indicated that the nanoflowers are three-dimensional in appearance with a range of 500 nm-- to 1 microm in size and made of several nanopetals with about 25 nm in thickness. In addition, we found that the shape separation could be achieved by using cationic cetyltrimethylammonium bromide to filter the different morphology spherical- and flowerlike structures due to the negative charge of hollow nanospheres. Both hollow nanospheres and nanoflowers presented antimicrobial activity toward Streptococcus aureus with MIC50 at 39.6 and 127.2 microg/mL, respectively.     

The role of multi-walled carbon nanotubes in shear enhanced crystallization of isotactic poly(1-butene)

The flow-induced crystallization behavior of nanocomposites, containing isotactic poly(1-butene) (PB) and functionalized multi-walled carbon nanotubes (MWNT), was investigated. Three different MWNT concentrations (0.1, 1, 5 wt%) were used to prepare the nanocomposites. Effects of MWNT and shear flow on the crystallization parameters were evaluated separately. Rheological measurements based on oscillatory shear revealed induction time and crystallization half-time at the quiescent state, where both parameters exhibited the nucleating effect of MWNT on PB. Rheological measurements based on steady-state shear flow and short-time shear flow revealed the evolution of molecular orientation, which was studied in both PB and its nanocomposites. A small increase in crystallization kinetic was recorded in PB under shear having moderate values of the Weissenberg (We) number. On the other hand, a dramatic synergistic effect of MWNT and shear was detected under the same shear conditions for nanocomposites. The optical microscopic images exhibited a clear transition from isotropic to row-like morphology in the case of nanocomposites under shear.     

Cascade One‐Pot Synthesis of Orange‐Red‐Fluorescent Polycyclic Cinnolino[2,3‐f]phenanthridin‐9‐ium Salts by Palladium(II)‐Catalyzed C−H Bond Activation of 2‐Azobiaryl Compounds and Alkenes

Quaternary ammonium salts were synthesized in moderate to good yields through double oxidative C?H bond activation on azobenzenes. The mechanism of the highly regioselective reaction of 2‐azobiaryls with alkenes to give orange‐red‐fluorescent cinnolino[2,3‐f]phenanthridin‐9‐ium salts and 15H‐cinnolino[2,3‐f]phenanthridin‐9‐ium‐10‐ide is proposed to involve ortho C?H olefination of the 2‐azobiaryl compound with the alkene, intramolecular aza‐Michael addition, concerted metalation–deprotonation (CMD), reductive elimination, and oxidation.