Synthesis of enantiopure furo[2,3-b]pyrroles

A simple method for the preparation of enantiopure furo[2,3-b]pyrroles, a rare class of concave bicyclic nitrogen and oxygen heterocycle, in promising yield has been developed. The 3-substituted pyrrolidinediones prepared from (2S,3S)-tetrahydro-3-hydroxy-5-oxo-2,3-furandicarboxylic acid (Garcinia acid) have been cyclized diastereo as well as enantioselectively to furo[2,3-b]pyrroles. The cyclization follows Baldwin’s rule.     

Hydrogen bonding interaction and topological insights of the electron localization/delocalization of l- arginine acetate

The vibrational spectral studies of the semi-organic material l- arginine acetate (LAA) are carried out with the help of density functional calculations to derive the equilibrium geometry as well as the vibrational wavenumbers and intensities of the spectral bands. The vibrational spectrum assignments are performed using normal coordinate analysis (NCA) in accordance with the scaled quantum mechanical force field approach (SQMFF). Vibrational spectra confirm the COO- modes split due to intra- and intermolecular association based on C–O….H, N–H….O, and O–H?O hydrogen bonding in the molecule, which lowers carboxylate wavenumbers. The natural bond orbital (NBO) analysis and DFT computations also confirm the occurrence of strong intra and intermolecular N–H?O and O–H?O ionic hydrogen bonding between charged species, providing the non-centrosymmetric structure in the LAA crystal.     

Allyl ether of aralkyl phenolic resin with low melt viscosity and its Alder‐ene blends with bismaleimide: synthesis,curing, and laminate properties

This paper outlines the synthesis and characterization of O‐allyl aralkyl phenolic (O‐allyl Xylok, OAX) resins having low melt viscosity and its Alder‐ene blends with 2, 2′‐bis 4‐[(4′‐maleimido phenoxy) phenyl] propane. The blends manifested a three‐stage curing pattern that converged to a two‐stage pattern on enhancing the maleimide content. The polymerization kinetics of typical allyl and maleimide rich resin systems showed apparent activation energy increasing and pre‐exponential factor decreasing from ene to the Diels–Alder step. Increased allyl content improved mechanical and impact properties of the composites at ambient temperature, although it diminished the retention of interlaminar shear strength at elevated temperature. Increased maleimide content of the resin was conducive for the higher rigidity for the composite and its retention at elevated temperature. A substantial increase in T_g (from 153°C to 280°C) and thermal stability was observed with an increase in maleimide content. High allyl content resulted in improved mechanical properties thanks to better resin–reinforcement interaction as revealed from morphological analysis. Copyright © 2014 John Wiley & Sons, Ltd.     

Polycaprolactone solution–based ink for designing microfluidic channels on paper via 3D printing platform for biosensing application

This work reports a novel fabrication technique for development of channels on paper‐based microfluidic devices using the syringe module of a 3D printing syringe–based system. In this study, printing using polycaprolactone (PCL)‐based ink (Mw 70 000‐90 000) was employed for the generation of functional hydrophobic barriers on Whatman qualitative filter paper grade 1 (approximate thickness of 180 μm and pore diameter of 11 μm), which would effectively channelize fluid flow to multiple assay zones dedicated for different analyte detection on a microfluidic paper‐based analytical device (μPAD). The standardization studies reveal that a functional hydrophilic channel for sample conduction fabricated using the reported technique can be as narrow as 460.7 ± 20 μm and a functional hydrophobic barrier can be of any width with a lower limit of about 982.2 ± 142.75 μm when a minimum number of two layers of the ink is extruded onto paper. A comparison with the hydrodynamic model established for writing with ink is used to explain the width of the line printed by this system. A fluid flow analysis through a single channel system was also carried out to establish its conformity with the Washburn model, which governs the fluid flow in two‐dimensional μPAD. The presented fabrication technique proves to be a robust strategy that effectively taps the advantages of this 3D printing technique in the production of μPADs with enhanced speed and reproducibility.     

On Regularization of a Source Identification Problem in a Parabolic PDE and its Finite Dimensional Analysis

We consider the inverse problem of identifying a general source term, which is a function of both time variable and the spatial variable, in a parabolic PDE from the knowledge of boundary measurements of the solution on some portion of the lateral boundary. We transform this inverse problem into a problem of solving a compact linear operator equation. For the regularization of the operator equation with noisy data, we employ the standard Tikhonov regularization, and its finite dimensional realization is done using a discretization procedure involving the space $L^2(0,\tau;L^2(Ω))$. For illustrating the specification of an a priori source condition, we have explicitly obtained the range space of the adjoint of the operator involved in the operator equation.     

Electron and X-ray diffraction studies of chemically deposited thin films of cadmium selenide following reaction with mercury(II) chloride solution

The reaction between thin films of CdSe and aqueous HgCl₂ was studied using electron diffraction (ED) powder X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). It was found that α-Hg₃Se₂Cl₂ is formed in the CdSe film following its reaction with 0.01 M HgCl₂ for a period of 5 minutes. Upon completion of the reaction of CdSe powder with 0.01 M HgCl₂, Hg₂Cl₂ is present in addition to α-Hg₃Se₂Cl₂ in a molar ratio of 1:3.1. The effect of air annealing on CdSe powder was also studied. Heating in air to 450°C for 1 hour resulted in an XRD pattern corresponding to the hexagonal form of CdSe.     

Peptide synthesis in aqueous environments: the role of extreme conditions and pyrite mineral surfaces on formation and hydrolysis of peptides

A comprehensive study of free energy landscapes and mechanisms of COS-mediated polymerization of glycine via N-carboxy anhydrides (NCAs, "Leuchs anhydrides") and peptide hydrolysis at the water-pyrite interface at extreme thermodynamic conditions is presented. Particular emphasis is set on the catalytic effects of the mineral surface including the putative role of the ubiquitous sulfur vacancy defects. It is found that the mere presence of a surface is able to change the free energetics of the elementary reaction steps. This effect can be understood in terms of a reduction of entropic contributions to the reactant state by immobilizing the reactants and/or screening them from bulk water in a purely geometric ("steric") sense. Additionally, the pyrite directly participates chemically in some of the reaction steps, thus changing the reaction mechanism qualitatively compared to the situation in bulk water. First, the adsorption of reactants on the surface can preform a product-like structure due to immobilizing and scaffolding them appropriately. Second, pyrite can act as a proton acceptor, thus replacing water in this role. Third, sulfur vacancies are found to increase the reactivity of the surface. The finding that the presence of pyrite speeds up the rate-determining step in the formation of peptides with respect to the situation in bulk solvent while stabilizing the produced peptide against hydrolysis is of particular interest to the hypothesis of prebiotic peptide formation at hydrothermal aqueous conditions. Apart from these implications, the generality of the studied organic reactions are of immediate relevance to many fields such as (bio)geochemistry, biomineralization, and environmental chemistry.     

A class of deformational flow test cases for linear transport problems on the sphere

A class of new benchmark deformational flow test cases for the two-dimensional horizontal linear transport problems on the sphere is proposed. The scalar field follows complex trajectories and undergoes severe deformation during the simulation; however, the flow reverses its course at half-time and the scalar field returns to its initial position and shape. This process makes the exact solution available at the end of the simulation, and facilitates assessment of the accuracy of the underlying transport scheme. A procedure to eliminate possible cancellations of errors when the flow reverses is proposed.     

Studies on the thermal properties of silicone polymer based thermal protection systems for space applications

Journal of Thermal Analysis and Calorimetry - Thermal decomposition, thermal conductivity, specific heat and flammability of polydimethyl siloxane (PDMS) resin and three PDMS-based systems with...     

Use of chemical etching of CR-39 foils at elevated temperature for fast neutron personnel monitoring in India

CR-39 Solid State Nuclear Track Detecting foils (SSNTD), along with 1 mm thick polyethylene radiator, sealed in triple laminated pouches, are used for country wide Fast Neutron Personnel Monitoring in India. With the present system of processing by elevated temperature electrochemical etching (ETECE) and evaluation using automatic image analysis, only 16 foils are processed at a time and it is useful over the dose equivalent range 0.2 mSv to 10 mSv. It has been reported that, by processing CR-39 of good detection efficiency by chemical etching at elevated temperature, more numbers of foils can be processed simultaneously. In the present study, CR-39 foils from Pershore Moulding (UK) have been chemically etched using 7 N KOH under various conditions of temperature and etching durations and evaluated using high magnification microscope. The duration of chemical etching, has been optimized at a constant temperature of 60°C for chemical etching process. The characteristics of the chemically etched CR-39 foils are compared with the characteristics of the CR-39 foils processed by the existing system of ETECE and the detailed results are presented in the full text of the paper. It has been observed that by chemical etching process, the dose equivalent range of CR-39 foils can be extended above 60 mSv.