Synthesis and crystal structure of an imidazolate-bridged dicopper tris(2-aminoethyl)amine complex

The [Cu(tren)(Im)Cu(tren)](ClO4)3·MeCN complex [tren=tris(2-aminoethyl)amine; Im=imidazolate anion] has been synthesized and characterized spectrally. The X-ray crystal structure analysis reveals that the imidazolate anion serves as a bridge to form a noncentrosymmetric dimeric structure in the complex. The co-ordination geometry about each copper(II) ion is a distorted trigonal bipyramid with three primary amine groups of the tren ligand forming the equatorial plane. The tertiary amine group and the imidazolate anion are in the axial positions. This revised version was published online in June 2006 with corrections to the Cover Date.     

Photocatalyzed [2 + 2 + 2]-cycloaddition of nitriles with acetylene: an effective method for the synthesis of 2-pyridines under mild conditions

The photocatalyzed [2 + 2 + 2]-cycloaddition of nitriles with 2 equiv of acetylene to 2-pyridines can be carried out under mild conditions and represents a valuable extension to common synthetical methods. For the ideal wavelength range (350-500 nm), lamps as well as sunlight can be used. Working at room temperature and in organic solvents such as toluene or hexane as well as in water gives satisfying results in many cases. However, it is also possible to vary the solvent and the reaction temperature of the photocatalyzed synthesis and to choose, with respect to the specific substrate, specific requirements for this particular reaction and general requirements of the method. This simple and selective method derives its potential mainly from the large variety of applicable nitriles. Suitable substrates include (functionalized) aliphatic and aromatic nitriles as well as cyanamides derived from secondary amines.     

Study of a fluorescence quenching mechanism of enoxacin and its determination in human serum and urine samples

The maximum emission wavelength of dopamine is 317 nm with excitation at 290 nm. The relative fluorescence intensity of dopamine decreased in the presence of enoxacin, which showed that fluorescence quenching occurred. The Stern-Volmer (S-V) plot showed a nonlinear relationship between the relative fluorescence intensity of dopamine and the concentration of enoxain. The quenching mechanism was studied and the results suggested that both dynamic and static quenching processes were responsible for the observed positive deviation in the S-V plot. When the S-V plot was modified by logarithm, the linear relationship was obtained between logF ₀/F and C in the range of 0.10 to 13.0 μg/mL (where F ₀ is the relative fluorescence intensity of dopamine, F is the relative fluorescence intensity of dopamine in the presence of enoxacin, and C is the concentration of enoxacin). The fluorescence quenching method for the determination of enoxacin was developed. The linear regression equation of the calibration graph of enoxacin was C = 13.70 (logF ₀/F) − 0.5836, with the correlation coefficient 0.9984. The detection limit was 2.0 ng/mL and the relative standard deviation was 2.52%. The effects of pH, the stability of dopamine in the presence of enoxacin, and foreign ions on the determination of enoxacin have been examined. The recovery of enoxacin was from 94.9 to 103.0% in a human serum sample and from 94.9 to 108.0% in a urine sample. The method is simple, rapid, and can be used for the determination of enoxacin in human serum and urine samples with satisfactory results. The text was submitted by the authors in English.     

Dually responsive multiblock copolymers via RAFT polymerization: Synthesis of temperature- and redox-responsive copolymers of PNIPAM and PDMAEMA

We report synthesis of temperature- and redox-responsive multiblock copolymers by reversible addition-fragmentation chain transfer (RAFT) polymerization. Well-defined α,ω-bis(dithioester)-functionalized poly(N-isopropylacrylamide) (PNIPAM) and poly(2-(dimethylamino) ethyl methacrylate) (PDMAEMA) were prepared using 1,4-bis(thiobenzoylthiomethyl)benzene and 1,4-bis(2-(thiobenzoylthio)prop-2-yl)benzene as RAFT agents, respectively. Dually responsive multiblock copolymers were synthesized in a single aminolysis/oxidation step from the α,ω-bis(dithioester)-terminated PNIPAM and PDMAEMA. The copolymers and their stimulus-responsive behavior were characterized by size exclusion chromatography, NMR, light scattering and atomic force microscopy. Due to the presence of redox-sensitive disulfide bonds between the blocks, the copolymers were readily reduced to the starting polymer blocks. The presence of temperature-responsive PNIPAM blocks provided the copolymers with the ability to assemble into core-shell nanostructures with hydrophobic PNIPAM as a core and cationic PDMAEMA as stabilizing shell when above the phase transition temperatures of PNIPAM. The temperature-induced assembly of the copolymers also showed substantial pH sensitivity. The phase transition temperature increased with decreasing pH, while molecular weight of the assemblies decreased.     

Synthesis Hexadecyl 3-{4-[2-Hydroxy-3（isopropylamino）propoxy]phenyl}propionate as Potential Ligand for Liposome Targeting to Ischemic Myocardium

Novel hexadecyl 3- { 4-[2-hydroxy-3（isopropylamino）propoxy]phenyl }propionate （HPP）was synthesized and its effect on delivery of liposomes into cultured cardiomyocytes was examined. The structure of HPP was characterized by IH NMR, 1R and MS. The amount of cardiomyocytes uptake of HPP-liposome was 3.9-fold higher than plain-liposome, and the increase was 6.2-fold when hypoxia happens. It indicated that HPP was a potential ligand for liposome targeting to ischemic myocardium.     

联萘衍生物的磺化反应研究

研究了1-和2-苯基萘, 1, 1'-和2, 2'-联萘, 2, 2-二羟基-, 2, 2'-二甲氧基和-2, 2'-甲基磺酰氧基-1, 1'-联萘等七种萘衍生物和三氧化硫的磺化反应。1-苯基萘和1, 1'-联萘的磺化先发生在4位上, 第二取代位置为6和7位。2-苯基萘和2, 2'-联萘均首先得到8位磺酸取代物, 进一步磺化得到8, 4'-和8, 8'-二磺酸取代物。2, 2'-二甲氧基-1, 1'-联萘以13:87的比例得到3位和6位磺酸取代物。2, 2'-二甲磺酰氧基-1, 1'-联萘以58:42的比例得到5位和6位磺酸取代物。2, 2'-二羟基-1, 1'-联萘的等摩尔磺化得到比例为35:65的5位和6位磺酸取代物, 和大于6摩尔的SO~3反应则以62:38的比例得到5位和6位磺酸取代物。     

Characteristics of major dioxin/furan congeners in melted slag of ash from municipal solid waste incinerators

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in slag of fly ash from three municipal solid waste (MSW) incinerators were analyzed to observe any changes in characteristics and distribution of their congeners by melting process. Actual concentration and Toxic Equivalent (TEQ) concentration profiles of 17 major congeners of PCDDs/PCDFs for gas, fly ash and melted slag were compared. The distributions of PCDDs/PCDFs in different streams macroscopically showed similarities with the generally known profiles for emission gas from a municipal waste incinerator. The total concentrations of PCDDs/PCDFs in off-gas and fly ash have been known to be a function of incineration conditions and of air pollution control device utilization; however, their normalized distributions were independent of such conditions. The concentrations of PCDDs/PCDFs in the melted slag of fly ash were not related to the concentrations of PCDDs/PCDFs congeners in fly ash but were rather a function of the melting furnace type and operation. The total amount of PCDDs/PCDFs in the melted slag of fly ash contained almost 150–27,000 times less dioxin than that in fly ash, however, the TEQ of dioxin in the slag was reduced by 435–43,500 times, which could enable them to be utilized as recycled construction materials. In normalized TEQ concentration profiles of 17 congeners of PCDDs/PCDFs, the ratio of PCDFs to PCDDs changed from 1.32 to 2.19 by melting, which showed relatively higher portion of furans left in melted slag than those in fly ash. By comparing reduction ratios of different congeners, PCDDs (dioxins) were relatively easier to destruct than PCDFs (furans) during melting process. The most difficult congener to destruct could be octa-chlorinated dibenzofuran (OCDF) among major congeners. For slag cooling methods, dioxin concentration in TEQ of slow cooled slag by air was four times higher than that of fast cooled slag by water. Thus cooling by water is more appropriate with the added beneficial effect of producing granules/particles, which can be utilized as roadbed materials.     

Syntheses,Characterization and Crystal Structures of Three Structurally Similar Dinuclear Schiff Base Cadmium(II) Complexes with Bridging Azide or Thiocyanate Ligands

Three novel Schiff base cadmium(II) complexes, derived from the end‐on (μ‐1,1‐N₃) azide or end‐to‐end (μ‐1,3‐NCS) thio cyanate bridges and similar tridentate Schiff base ligands, have been synthesized under similar synthetic procedures and their crystal structures determined by X‐ray diffraction methods. They are the dinuclear double end‐on azide‐bridged [Cd₂(L1)₂(N₃)₂(μ‐1,1‐N₃)₂] ( 1 ), the dinuclear double end‐on azide‐bridged [Cd₂(L2)₂(N₃)₂(μ‐1,1‐N₃)₂] ( 2 ), and the dinuclear double end‐to‐end thiocyanate‐bridged [Cd₂(L3)₂(NCS)₂(μ_1,3‐NCS)₂] ( 3 ), where L1, L2 and L3 are three similar tridentate Schiff bases obtained by condensation of 2‐pyridylaldehyde with N,N‐diethylethane‐1,2‐diamine, of 2‐pyridylaldehyde with N‐isopropylethane‐1,2‐diamine, and of 2‐pyridylaldehyde with N,N‐dimethylpropane‐1,3‐diamine, respectively. Each cadmium(II) centre in the complexes is in a distorted octahedral coordination. There is a crystallographic inversion centre in each of the complexes. The similar small ligands used as the secondary ligands in the preparation of the cadmium(II) complexes with similar Schiff bases can result in similar structures.     

Solvolthermal Syntheses and Crystal Structures of Three Linear Trinuclear Schiff Base Complexes of Zinc(II) and Cadmium(II)

Three linear trinuclear Schiff base complexes, {Zn[Zn(CH₃COO)(C₁₇H₁₆N₂O₂)]₂} ( 1 ), {Zn[Zn(CH₃COO)(C₂₅H₂₀N₂O₂)]₂} ( 2 ), and {Cd[Cd(CH₃COO)(C₁₈H₁₈N₂O₂)]₂} ( 3 ), were synthesized for the first time under solvolthermal conditions. Their structures have been characterized by elemental analyses, X-ray single crystal determinations, and infrared spectroscopy. There are three bridges across the M-M atom pairs (M is Zn for 1 and 2 , or Cd for 3 ) in each complex, involving two O atoms of a Schiff base ligand (N,N′-bis(salicylidene)-1, 3-propanediaminate (SALPD^2-) for 1 , N, N′-bis(2-hydroxy-naphthalmethenylimino)-1, 3-propanediaminate (NAPTPD^2-) for 2 , and N,N′-bis-(salicylidene)-1,4-butanediaminate (SALBD^2-) for 3 ), and an O-C-O moiety of a μ-acetato group. In each of the complexes, the central M²⁺ ion is located on an inversion center and has a distorted octahedral coordination involving four bridging O atoms from two Schiff base ligands in the equatorial plane and one O atom from each bridging acetate group in the axial positions. The coordination around the terminal M²⁺ ions is irregular square pyramidal, with two O atoms and two N atoms of the Schiff base ligand in the basal plane and one O atom from an acetate group in the apical position. The acetate bridges linking the central and terminal M²⁺ ions are mutually trans. The M…M distances are 3.050(3) Å in 1 , 3.139(2) Å in 2 , and 3.287(6) Å in 3 .