Efficient Aerobic Wacker Oxidation of Styrenes Using Palladium Bis(isonitrile) Catalysts

The palladium‐catalyzed aerobic oxidation of alkenes and especially styrenes (Wacker oxidation) by using chiral pseudo C₂‐symmetrical bis(isonitrile) ligands in the absence of further cocatalysts gives rise to methyl ketones in a highly chemoselective manner. The palladium bis(isonitrile) catalyst was characterized by NMR spectroscopy and X‐ray structure analysis, revealing a dissymmetric coordination of palladium by the two isonitrile moieties.     

Heterocyclic nitrogen base adducts of nickel(II)–di(2,4-dibromophenyl)carbazonate

The title complex was prepared and characterized by elemental and spectral analyses. The formation constants of various heterocyclic nitrogen base adducts with the Ni^II–di(2,4-dibromophenyl)carbazonate have been determined in a monophase by spectrophotometry at 25 ± 0.1 °C. The monodenatate and bidentate bases form penta- and hexa-coordinated adducts respectively with 1:1 stoichiometry for the metal chelate-base, whereas the unsaturated monodentate bases form hexa-coordinated adducts with 1:2 stoichiometry. The behaviour of saturated heterocyclic bases such as pyrrolidine, piperidine, hexamethyleneimine and morpholine towards the metal chelate has been studied, and the results are discussed in terms of steric hindrance, basicity and ring structure.     

Reactions of oxidizing radicals with 2- and 3-aminopyridines: a pulse radiolysis study

Reactions of OH radicals and some one-electron oxidants with 2-aminopyridine (2-AmPy) and 3-aminopyridine (3-AmPy) were studied in aqueous solutions using pulse radiolysis technique. The OH adduct of 2-AmPy at pH 9 has an absorption maximum at 360 nm along with a weak absorption band in the visible region and was found to be reactive with oxygen. The rate constant for its reaction with O₂ was determined to be 1.0×10⁸ dm³ mol⁻¹ s⁻¹. At pH 4 also, the OH adduct of 2-AmPy has an absorption band at 360 nm. However, there are differences in the absorption at other wavelengths. From the plot of ΔOD vs. pH at 340 nm, the pK_a of the OH adduct was determined to be 6.5. Among the specific oxidants, only SO₄^−√ radicals were able to oxidize 2-AmPy. In the case of 3-aminopyridine (3-AmPy), the transient species formed by OH radical reaction at pH 9 has an absorption maximum at 410 nm with shoulder bands on both the sides. Its absorption spectrum at pH 4 was different indicating the existence of a pK value for the OH adduct. pK_a of 3-AmPy-OH radical adduct species was evaluated to be 5.7. This adduct species was also found to be reactive with oxygen (k=7.6×10⁶ dm³ mol⁻¹ s⁻¹). Specific one-electron oxidants like N₃^√, Br₂^−√ C₂^−√ and SO₄^−√ were able to oxidize 3-AmPy indicating that it is easier to oxidize 3-AmPy as compared to 2-AmPy.     

Dip-pen nanolithography in tapping mode

Dip-pen nanolithography (DPN) is becoming a popular nano-patterning technique for depositing materials onto a substrate using the probe of an atomic force microscope (AFM). Here, we demonstrate the deposition of a short synthetic peptide by DPN using the Tapping Mode of AFM rather than the commonly used contact mode. DPN in Tapping Mode requires drive amplitude modifications for deposition, yet allows for gentle imaging of the deposited material and enables deposition on soft surfaces.     

Preferential binding of peptides to graphene edges and planes

Peptides identified from combinatorial peptide libraries have been shown to bind to a variety of abiotic surfaces. Biotic-abiotic interactions can be exploited to create hybrid materials with interesting electronic, optical, or catalytic properties. Here we show that peptides identified from a combinatorial phage display peptide library assemble preferentially to the edge or planar surface of graphene and can affect the electronic properties of graphene. Molecular dynamics simulations and experiments provide insight into the mechanism of peptide binding to the graphene edge.     

Synthesis of a series of ethylene glycol modified water-soluble tetrameric TPE-amphiphiles with pyridinium polar heads: Towards applications as light-up bioprobes in protein and DNA assay,and wash-free imaging of bacteria

Available online Development of water soluble AIE-active “light-up” bioprobes for the detection of biomacromolecules has drawn huge research interests in recent past. In this study, a series of ethylene glycol modified water soluble tetrameric tetraphenylethylene amphiphiles with pyridinium polar heads (TPE-xEG-Py, x = 3, 4, 6 or 1a-c) have been synthesized by varying the ethylene glycol spacer. Their unique structure allows them to form vesicles and other nanoaggregates in aqueous solutions. These amphiphiles were successfully utilized for fluorimetric detection and quantitation of BSA and DNA based on the electrostatic interactions to trigger AIE-emission from the TPE moiety. The electrostatic interaction was also proved very effective in wash-free imaging of both Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria with up to 92 folds increase in fluorescence response within bacterial concentration 0–12 × 10⁸ CFU mL^?1. The strategy is advantageous due to cost-effective and easy synthesis, high water solubility, and fast response.     

Design,synthesis and biological evaluation of 5-(2-(4-(substituted benzo[d]isoxazol-3-yl)piperazin-1-yl)acetyl)indolin-2-one and 5-(2-(4-substitutedpiperazin-1-yl)acetyl)indolin-2-one analogues as novel anti-tubercular agents

A series of thirty-six novel 5-(2-(4-(benzo[d]isoxazol-3-yl)piperazin-1-yl)acetyl)indolin-2-one and 5-(2-(4-substitutedpiperazin-1-yl)acetyl)indolin-2-one analogues were synthesized, characterized and screened for their in vitro anti-tubercular activity against Mycobacterium tuberculosis H37Rv strain. These compounds exhibited minimum inhibitory concentration between 1.56 and 50 μg/mL. Among these derivatives, compounds 10c, 10d, 10j, 10o and 10v (MIC 6.25 μg/mL) displayed moderate activity, while compounds 10e, 10l, 10q, 10w,10x, 12d, 12e and 12i (MIC 3.12 μg/mL) showed good anti-tubercular activity and compounds 10f, 10k, 10p, 10r, 12f, 12j and 12k (MIC 1.56 μg/mL) exhibited excellent anti-tubercular activity. In addition, MTT assay was accomplished on the active analogues of the series against mouse macrophage (RAW 264.7) cells to evaluate the cytotoxic effect of the newly synthesized compounds and selectivity index of the compounds was determined.     

Mass–yield distributions of fission products from photo-fission of natPb induced by 50–70 MeV bremsstrahlung

The mass–yield distributions of various fission products have been determined in the 50-, 60- and 70-MeV end point bremsstrahlung induced fission of ^natPb using off-line γ-ray spectrometric technique in the electron linac at Pohang Accelerator Laboratory, Korea. The mass–yield distributions are symmetric with average mass of 102.34, 102.25 and 102.03 and FWHM of 21, 22 and 23 mass unit, respectively. From the present data and literature data in the 50–85 MeV bremsstrahlung induced fission of ²⁰⁹Bi the following observations were obtained: (i) The average masses of the yield distributions in the 50–85 MeV bremsstrahlung induced fission of ^natPb and ²⁰⁹Bi are around 102.25 ± 0.25 and 103 ± 0.5, respectively. (ii) The FWHM of the mass–yield distributions increases from about 21 mass units at 50 MeV to 23 mass units at 70–85 MeV, which is explained from the point of increase in multi-chance fission probability with increasing excitation energy. (iii) Within the bremsstrahlung energy range of 50–85 MeV, the role of nuclear structure effect in the mass–yield distribution was observed in the photo-fission of ²⁰⁹Bi, whereas it was not seen in case of ^natPb. This may be due to the presence of so many isotopes in ^natPb unlike mono-isotopic ²⁰⁹Bi.     

A fast, inexpensive, and safe method for residue analysis of meptyldinocap in different fruits by liquid chromatography/tandem mass spectrometry

An analytical method is reported for residue analysis of the fungicide meptyldinocap in different fruit matrixes that involves extraction with ethyl acetate, hydrolysis of the residues with ethanolamine, and determination by LC/MS/MS. The method involves extraction of 10 g sample with 10 mL ethyl acetate; evaporation of the ethyl acetate phase to dryness, and subsequent hydrolysis of the residues to 4,6-dinitro-2-(1-methylheptyl) phenol on reaction with 1% ethanolamine. The pH of this hydrolyzed product was neutralized with formic acid and analyzed by LC/MS/MS. The hydrolysis reaction followed pseudo-first-order kinetics, and the reaction product was spectroscopically confirmed as 2-(1-methylheptyl)-4,6-dinitrophenol. The method offered > 80% recoveries at an LOQ of 10 ng/g for grape and mango, 25 ng/g for pomegranate with intralaboratory Horwitz ratio < 0.5, and measurement uncertainties < 10% at LOQ levels. Considering first-order rate kinetics, activation energy, enthalpy of activation, and entropy of activation varied as solvent > mango > grape > pomegranate. Free energy of activation at 298 K was higher than at 280 K and was similar for solvent and three matrixes at both temperatures.     

Conformational analysis of methylphenidate: comparison of molecular orbital and molecular mechanics methods

Summary Methylphenidate (MP) binds to the cocaine binding site on the dopamine transporter and inhibits reuptake of dopamine, but does not appear to have the same abuse potential as cocaine. This study, part of a comprehensive effort to identify a drug treatment for cocaine abuse, investigates the effect of choice of calculation technique and of solvent model on the conformational potential energy surface (PES) of MP and a rigid methylphenidate (RMP) analogue which exhibits the same dopamine transporter binding affinity as MP. Conformational analysis was carried out by the AM1 and AM1/SM5.4 semiempirical molecular orbital methods, a molecular mechanics method (Tripos force field with the dielectric set equal to that of vacuum or water) and the HF/6-31G* molecular orbital method in vacuum phase. Although all three methods differ somewhat in the local details of the PES, the general trends are the same for neutral and protonated MP. In vacuum phase, protonation has a distinctive effect in decreasing the regions of space available to the local conformational minima. Solvent has little effect on the PES of the neutral molecule and tends to stabilize the protonated species. The random search (RS) conformational analysis technique using the Tripos force field was found to be capable of locating the minima found by the molecular orbital methods using systematic grid search. This suggests that the RS/Tripos force field/vacuum phase protocol is a reasonable choice for locating the local minima of MP. However, the Tripos force field gave significantly larger phenyl ring rotational barriers than the molecular orbital methods for MP and RMP. For both the neutral and protonated cases, all three methods found the phenyl ring rotational barriers for the RMP conformers/invertamers (denoted as cte, tte, and cta) to be: cte, tte> MP > cta. Solvation has negligible effect on the phenyl ring rotational barrier of RMP. The B3LYP/6-31G* density functional method was used to calculate the phenyl ring rotational barrier for neutral MP and gave results very similar to those of the HF/6-31G* method.