Simultaneous voltammetric sensing of acetaminophen,epinephrine and melatonin using a carbon paste electrode modified with zinc ferrite nanoparticles

A highly selective electrochemical sensor was fabricated based on a modified carbon paste electrode with zinc ferrite nanoparticles (ZnFe₂O₄ NPs). The nanocomposite has attractive properties such as high surface-to-volume ratio and good electrocatalytic activity towards the drugs acetaminophen (AC), epinephrine (EP), and melatonin (MT), best at working voltages of 0.35, 0.09 and 0.55 V (vs. Ag/AgCl), respectively. The linear ranges (and detection limits) are 6.5–135 (0.4) μmol L^?1 for AC, 5–100 (0.7) μmol L^?1 for EP, and 6.5–145 (3) μmol L^?1 for MT.

Open image in new window

Graphical abstract A novel electrochemical sensor based on a modified carbon paste electrode with zinc ferrite nanoparticles (ZnFe₂O₄) for the simultaneous detection of the acetaminophen, epinephrine and melatonin was fabricated

     

Electrochemical determination of naproxen in the presence of acetaminophen using a carbon paste electrode modified with activated carbon nanoparticles

In this study, cyclic voltammetry and differential pulse voltammetry were used to determine the electrochemical properties and concentration of naproxen in pharmaceutical formulation and human serum samples by using a carbon paste electrode modified with activated carbon nanoparticles. Optimum conditions were obtained at an electrode with 0.005 g activated carbon nanoparticles in a phosphate buffer solution of pH 6 as a supporting electrolyte. Linear calibration curves were obtained in the range of 0.1–120 μM, and the detection limit of naproxen determined was 0.0234 μM. The modified electrode shows good selectivity for naproxen in the presence of some organic and inorganic interferences and very good precision in real samples. Finally, naproxen was measured in the presence of acetaminophen.     

An improved electrochemical method for the synthesis of some benzofuran derivatives

Electrochemical oxidation of catechol and some 3-substituted catechols (1a--c) has been studied in the presence of 2-chloro-5,5-dimethyl-1,3-cyclohexanedione (3) in aqueous solution using cyclic voltammetry and controlled-potential coulometry. The results indicate that the quinones derived from catechols (1a--c) participate in a Michael addition reaction with 2-chloro-5,5-dimethyl-1,3-cyclohexanedione (3) with consumption of only two electrons per molecule of (1a--c) to from the corresponding benzoforans (10a--c). The electrochemical synthesis of benzofurans has been successfully performed at a carbon rod electrode and in an undivided cell with high yields and purity.     

Thermal Stability of Modified i‐Motif Oligonucleotides with Naphthalimide Intercalating Nucleic Acids

In continuation of our investigation of characteristics and thermodynamic properties of the i‐motif 5′‐d[(CCCTAA)₃CCCT)] upon insertion of intercalating nucleotides into the cytosine‐rich oligonucleotide, this article evaluates the stabilities of i‐motif oligonucleotides upon insertion of naphthalimide (1H‐benzo[de]isoquinoline‐1,3(2H)‐dione) as the intercalating nucleic acid. The stabilities of i‐motif structures with inserted naphthalimide intercalating nucleotides were studied using UV melting temperatures (T_m) and circular dichroism spectra at different pH values and conditions (crowding and non‐crowding). This study indicated a positive effect of the naphthalimide intercalating nucleotides on the stabilities of the i‐motif structures compared to the wild‐type structure which is in contrast to a previous observation for a pyrene‐intercalating nucleotide showing a decrease in T_m values.     

Preparation and characterization of polyphosphotungstate/ZrO2 nanocomposite and their sonocatalytic and photocatalytic activity under UV light illumination

Polyoxometalates (POM) supported on zirconia, H₃PW₁₂O₄₀/ZrO_2, were prepared by incorporating polyphosphotungstate into a zirconia matrix via sol-gel technique that involving the hydrolysis of zirconium (IV) n-butoxide, Zr (n-OBu)₄, as the ZrO₂ source. This insoluble and readily separable catalyst was characterized by using XRD, FT-IR, SEM, and UV diffuse reflectance spectroscopy (UV-DRS), indicating that the polyphosphotungstate was chemically attached to the zirconia supports, and primary Keggin structure remained intact. The photocatalytic and sonocatalytic activity of the supported polyphosphotungstate was tested via degradation of different dyes in aqueous solutions. The POM-ZrO₂ nanocomposite showed higher photocatalytic and sonocatalytic activity than pure polyoxometalate or pure ZrO₂.     

Efficient One‐pot Synthesis of Alkyl 3‐(alkyl)‐4‐methyl‐2‐thioxo‐2,3‐dihydrothiazole‐5‐carboxylates in a Multi Component Reaction

A simple and efficient one‐pot synthesis of alkyl 2‐(alkyl)‐4‐methyl‐2‐thioxo‐2,3‐dihydrothiazole‐5‐carboxylates from the reaction of primary alkylamines and carbon disulfide in the presence of 2‐chloro‐1,3‐dicarbonyl compounds is described. This new protocol has several advantages such as lack of necessity of the catalyst, good yields, mild conditions and short times for reaction.     

Effect of Erosive Agents on Surface Characteristics of Nano-Fluorapatite Ceramic: An In-Vitro Study

Erosive beverages cause dissolution of natural teeth and intra-oral restorations, resulting in surface characteristic changes, particularly roughness and degradation. The purpose of this study was to evaluate the surface roughness and topography of a dental ceramic following immersion in locally available erosive solutions. A total of 160 disc specimens of a nano-fluorapatite type ceramic (12 mm diameter and 2 mm thickness) were fabricated and equally distributed into two groups (n = 80) and then evenly distributed among the following five testing groups (n = 16): lemon juice, citrate buffer solution, 4% acetic acid, soft cola drink, and distilled water which served as a control. The surface roughness (Ra) and topography were evaluated using a profilometer and scanning electron microscope at baseline, 24 h, 96 h, and 168 h respectively. Data were analyzed using ANOVA and Tukey’s multiple comparisons (p ≤ 0.05). Surface changes were observed upon exposure to all acidic beverages except distilled water. Amongst all immersion media, 4% acetic acid produced the most severe surface roughness across all time periods (i.e., baseline, 24 h, 96 h, and 168 h). A statistically significant difference in the surface roughness values between all immersion media and across all four time intervals was observed. Erosive agents had a negative effect on the surface roughness and topography of the tested ceramic. The surface roughness increased with increased storage time intervals.     

Residual and Past Discrete Tsallis and Renyi Extropy with an Application to Softmax Function

In this paper, based on the discrete lifetime distribution, the residual and past of the Tsallis and Renyi extropy are introduced as new measures of information. Moreover, some of their properties and their relation to other measures are discussed. Furthermore, an example of a uniform distribution of the obtained models is given. Moreover, the softmax function can be used as a discrete probability distribution function with a unity sum. Thus, applying those measures to the softmax function for simulated and real data is demonstrated. Besides, for real data, the softmax data are fit to a convenient ARIMA model.     

Semiconductor Behavior and Room Temperature Ferromagnetism in e-Beam Evaporated Co/TiO2 Multilayer Thin Films

Physics of the Solid State - The Co/TiO2 multilayer thin films have been deposited by e-beam evaporation method on glass substrates in vacuum and annealed in air at 773 K for 1 h. The crystal...