Electrochemical determination of naproxen in the presence of acetaminophen using a carbon paste electrode modified with activated carbon nanoparticles

In this study, cyclic voltammetry and differential pulse voltammetry were used to determine the electrochemical properties and concentration of naproxen in pharmaceutical formulation and human serum samples by using a carbon paste electrode modified with activated carbon nanoparticles. Optimum conditions were obtained at an electrode with 0.005 g activated carbon nanoparticles in a phosphate buffer solution of pH 6 as a supporting electrolyte. Linear calibration curves were obtained in the range of 0.1–120 μM, and the detection limit of naproxen determined was 0.0234 μM. The modified electrode shows good selectivity for naproxen in the presence of some organic and inorganic interferences and very good precision in real samples. Finally, naproxen was measured in the presence of acetaminophen.     

Removal and preconcentration of lead(II), cadmium(II) and chromium(III) ions from wastewater samples using surface functionalized magnetite nanoparticles

The potential removal and preconcentration of lead(II), cadmium(II), and chromium(III) ions from wastewaters were investigated and explored. Magnetite nanoparticles were chemically modified with p-nitro aniline. The aniline-coated magnetite nanoparticles (ANMNPs) were fully characterized by FT-IR, XRD, SEM, and TEM measurements. Batch studies were performed to address various experimental parameters for the removal and determination of these ions. ANMNPs showed high tendency to investigated metal ions, in this order: Cr(III) > Cd(II) > Pb(II), owing to the strong contribution of surface loaded aniline. The potential applications of ANMNPs adsorbent for removal and preconcentration of Pb(II), Cr(III), and Cd(II) from wastewaters as well as drinking tap water samples were successfully accomplished giving recovery values of (98–101 %), without any noticeable interference of the wastewater or drinking tap water matrices.     

Identification of PET radiometabolites by cytochrome P450, UHPLC/Q-ToF-MS and fast radio-LC: applied to the PET radioligands [11C]flumazenil, [18F]FE-PE2I, and [11C]PBR28

A general method is presented for the identification of radiometabolites in plasma of human and monkey subjects after administration of positron emission tomography (PET) radioligands. The radiometabolites are first produced in vitro, using liver microsomes, subsequently separated using fast radio-liquid chromatography (radio-LC), and individually collected and identified by ultra high-performance liquid chromatography/quadrupole-time of flight-mass spectrometry in MS and MS^E mode. Fast radio-LC provided superior resolution compared to conventional radio-LC, resulting in separation of a greater number of metabolites. The radiometabolites produced in vivo are then compared to and identified based on the in vitro results. This approach was applied to three PET radioligands, [¹¹C]flumazenil, [¹⁸F]FE-PE2I, and [¹¹C]PBR28, resulting in the identification of five, two, and one radiometabolites, respectively. This procedure can easily be adopted to identify the radiometabolites produced in vivo from a variety of PET radioligands.     

Preparation, spectral and biological investigation of formaldehyde-based ligand containing piperazine moiety and its various polymer metal complexes

A novel tetradentate salicylic acid-formaldehyde ligand containing piperazine moiety (SFP) was synthesized by condensation of salicylic acid, formaldehyde and piperazine in presence of base catalyst, which was subjected for the preparation of coordination polymers with metal ions like manganese(II), cobalt(II), copper(II), nickel(II) and zinc(II). All the synthesized polymeric compounds were characterized by elemental analysis, IR, (1)H NMR and electronic spectral studies. The thermal stability was determined by thermogravimetric analysis and thermal data revealed that all the polymer metal complexes show good thermal stability than their parent ligand. Electronic spectral data and magnetic moment values revealed that polymer metal complexes of Mn(II), Co(II) and Ni(II) show an octahedral geometry while Cu(II) and Zn(II) show distorted octahedral and tetrahedral geometry respectively. The antimicrobial screening of the ligand and coordination polymers was done by using Agar well diffusion method against various bacteria and fungi. It was evident from the data that antibacterial and antifungal activity increased on chelation and all the polymer metal complexes show excellent antimicrobial activity than their parent ligand.     

Multispectroscopic DNA interaction studies of a water-soluble nickel(II) complex containing different dinitrogen aromatic ligands

The water-soluble Ni(II) complex, [Ni(bipy)₂(phen-dione)](OAc)₂·2H₂O (bipy = 2,2′-bipyridine and phen-dione = 1,10-phenanthroline-5,6-dione) has been synthesized and characterized by physico-chemical and spectroscopic methods. The binding interactions of this complex with calf thymus DNA (CT-DNA) were investigated using fluorimetry, spectrophotometry, circular dichroism and viscosimetry. In fluorimetric studies, the enthalpy and entropy of the reaction between the complex and CT-DNA showed that the reaction is exothermic (ΔH = −123.9 kJ mol⁻¹; ΔS = −323.5 J mol⁻¹ K⁻¹). The competitive binding studies showed that the complex could not release methylene blue completely. The complex showed absorption hyperchromism in its UV–Vis spectrum with DNA. The calculated binding constant, K _b obtained from UV–Vis absorption studies was 2 × 10⁵ M⁻¹. Moreover, the complex induced detectable changes in the CD spectrum of CT-DNA, as well as changes in its viscosity. The results suggest that this nickel(II) complex interact with CT-DNA via a groove-binding mode.     

Effect of radiation process on antinutrients and HCl extractability of calcium,phosphorus and iron during processing and storage

Whole and dehulled flours of millet cultivars Ashana and Dembi were stored for 30 and 60 days before and after radiation and/or cooking. Phytic acid and polyphenols contents were assayed for all treatments. The results revealed that the storage period was found to have no effect on phytate and polyphenols contents. Moreover, dehulling of the grains reduced more than 50% of phytate and polyphenols of both cultivars. Cooking of the raw whole and dehulled flour significantly (P≤0.05) reduced phytate and polyphenols contents for both cultivars. Radiation process alone had no effect on phytate and polyphenols contents but when followed by cooking significantly (P≤0.05) reduced the level of such antinutrients for the whole and dehulled flour of both cultivars. Dehulling alone significantly (P≤0.05) decreased Ca and P content but slightly decreased Fe content. Radiation alone or in combination with cooking was found to have slight effect on minerals content of the whole and dehulled raw flour for both cultivars. Cooking alone or in combination with radiation of whole or dehulled raw flour significantly (P≤0.05) improved the extractable Ca but had no significant (P≤0.05) effect on extractable P and Fe for both cultivars.     

The Padé-Rayleigh-Ritz method for solving large hermitian eigenproblems

We make use of the Padé approximants and the Krylov sequencex, Ax,,...,A ^m–1 x in the projection methods to compute a few Ritz values of a large hermitian matrixA of ordern. This process consists in approaching the poles ofR _x()=((I–A)^–1 x,x), the mean value of the resolvant ofA, by those of [m–1/m]_Rx(), where [m–1/m]_Rx() is the Padé approximant of orderm of the functionR _x(). This is equivalent to approaching some eigenvalues ofA by the roots of the polynomial of degreem of the denominator of [m–1/m]_Rx(). This projection method, called the Padé-Rayleigh-Ritz (PRR) method, provides a simple way to determine the minimum polynomial ofx in the Krylov subspace methods for the symmetrical case. The numerical stability of the PRR method can be ensured if the projection subspacem is sufficiently small. The mainly expensive portion of this method is its projection phase, which is composed of the matrix-vector multiplications and, consequently, is well suited for parallel computing. This is also true when the matrices are sparse, as recently demonstrated, especially on massively parallel machines. This paper points out a relationship between the PRR and Lanczos methods and presents a theoretical comparison between them with regard to stability and parallelism. We then try to justify the use of this method under some assumptions.     

A novel isocyanide-based three-component synthesis of benzimidazo[1,2-a][1,4]diazepinones

3-(2-Formyl-1H-benzimidazol-1-yl)propanoic acid, as a bifunctional formyl acid was prepared in four steps. This compound underwent a one-pot reaction with amines and alkyl isocyanides via the Ugi 4-center-3-component condensation. A series of novel benzimidazole-fused 1,4-diazepine-5-ones were obtained via this method in moderate to excellent yields.     

Morphology of polyaniline nanofibers synthesized under different conditions

Polyaniline nanofibers are readily synthesized by bulk polymerization; ammonium per sulphate (APS) is used as oxidizing agent and hydrochloric acid as dopant without any hard or soft templates. A detailed study was conducted on the effect of a variety of synthetic conditions on the size and morphology of the polyaniline nanostructure. These conditions include the concentration of dopant, and the APS-to-aniline and acid-to-aniline molar ratios. The morphology of the nanofibers was confirmed by SEM and TEM. XRD and FT-IR and UV–visible spectroscopy were used for structural characterization of nanofibers. The results showed that not only the microstructure of the polyaniline product, but also other characteristics, for example conductivity, crystallinity, and, more importantly, the efficiency of the process are strongly affected by the synthetic conditions.