Growth of large La2−xSrxCuO4 single crystals using tilting-mirror-type infrared heating image furnace

Large single crystals of La_2−xSr_xCuO₄ (LSCO) high-T_c superconductors were grown by the infrared heating floating zone (IR-FZ) method using a tilting-mirror-type image furnace. The maximum diameter of the LSCO crystals increased to 10 mm in the tilting-mirror-type image furnace from 6 mm in the conventional image furnace. CuO rich feeds were required for the crystal growth using the tilting-mirror-type image furnace to compensate for the lack of CuO caused by the significant evaporation of CuO during the growth. The evaporation of CuO was affected by the tilting angle of the mirrors of the image furnace and by feed diameter. The optimized growth conditions were as follows: mirror tilting angle, 20°; feed diameter, 10 mm∅; and feed composition 50.7 mol% CuO.     

Fast and quantitative analysis of branched-chain amino acids in biological samples using a pillar array column

In this study, a fast and quantitative determination method for branched-chain amino acids (BCAAs), namely leucine, isoleucine, and valine, was developed using a pillar array column. A pillar array column with low-dispersion turns was fabricated on a 20?×?20-mm² microchip using multistep ultraviolet photolithography and deep reactive ion etching. The BCAAs were fluorescently labeled with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F), followed by reversed-phase separation on the pillar array column. The NBD derivatives of the three BCAAs and an internal standard (6-aminocaproic acid) were separated in 100 s. The calibration curves for the NBD-BCAAs had good linearity in the range of 0.4–20 μM, using an internal standard. The intra- and interday precisions were found to be in the ranges of 1.42–3.80 and 2.74–6.97 %, respectively. The accuracies for the NBD-BCAA were from 90.2 to 99.1 %. The method was used for the analysis of sports drink and human plasma samples. The concentrations of BCAAs determined by the developed method showed good agreements with those determined using a conventional high-performance liquid chromatography system. As BCAAs are important biomarkers of some diseases, these results showed that the developed method could be a potential diagnostic tool in clinical research.     

Preparation of various Janus composite particles with two components differently combined

Janus composite particles with a combination of organic and inorganic substances were synthesized by soap-free emulsion polymerization in which an amphoteric initiator of 2,2′-azobis[N-(2-carboxyethyl)-2-2-methylpropionamidine] (VA-057) was employed to introduce a polystyrene (PSt) lobe onto silica cores surface-modified with 3-methacryloxypropyltrimethoxy silane (MPTMS). Thermogravimetric analysis and X-ray photoelectron spectroscopy were used to characterize the surface-modified silica particles and showed that a small amount of MPTMS introduced onto the surface of silica particles could successfully prepare SiO₂–PSt Janus particles. The oxide part of SiO₂–PSt Janus particles obtained with the polymerization was further surface-modified with 3-aminopropyltriethoxysilane (APS) to introduce positively charged amino groups on the silica surface. The silica surface modified with APS was covered with gold by electroless deposition in which a gold precursor of auric chloride was reduced with ascorbic acid in the presence of polyvinylpyrrolidone. The electroless deposition of gold successfully produced Janus particles with a combination of gold and PSt surfaces. Furthermore, dissolution of the polymer component of the Au–PSt Janus particles in tetrahydrofuran led to another Janus type of particles with an inorganic combination of Au and SiO₂.     

Synthesis of New Chlorin e6 Trimethyl and Protoporphyrin IX Dimethyl Ester Derivatives and Their Photophysical and Electrochemical Characterizations

In view of increasing demands for efficient photosensitizers for photodynamic therapy (PDT), we herein report the synthesis and photophysical characterizations of new chlorin e₆ trimethyl ester and protoporphyrin IX dimethyl ester dyads as free bases and Zn^II complexes. The synthesis of these molecules linked at the β‐pyrrolic positions to pyrano[3,2‐c]coumarin, pyrano[3,2‐c]quinolinone, and pyrano[3,2‐c]naphthoquinone moieties was performed by using the domino Knoevenagel hetero Diels–Alder reaction. The α‐methylenechromanes, α‐methylenequinoline, and ortho‐quinone methides were generated in situ from a Knoevenagel reaction of 4‐hydroxycoumarin, 4‐hydroxy‐6‐methylcoumarin, 4‐hydroxy‐N‐methylquinolinone, and 2‐hydroxy‐1,4‐naphthoquinone, respectively, with paraformaldehyde in dioxane. All the dyads as free bases and as Zn^II complexes were obtained in high yields. All new compounds were fully characterized by 1D and 2D NMR techniques, UV/Vis spectroscopy, and HRMS. Their photophysical properties were evaluated by measuring the fluorescence quantum yield, the singlet oxygen quantum yield by luminescence detection, and also the triplet lifetimes were correlated by flash photolysis and intersystem crossing (ISC) rates. The fluorescence lifetimes were measured by a time‐correlated single photon count (TCSPC) method, fluorescence decay associated spectra (FDAS), and anisotropy measurements. Magnetic circular dichroism (MCD) and circular dichroism (CD) spectra were recorded for one Zn^II complex in order to obtain information, respectively, on the electronic and conformational states, and interpretation of these spectra was enhanced by molecular orbital (MO) calculations. Electrochemical studies of the Zn^II complexes were also carried out to gain insights into their behavior for such applications.     

Control of Chromophore Symmetry by Positional Isomerism of Peripheral Substituents

The first example of the control of porphyrinoid chromophore symmetry based on the positional isomerism of peripheral substituents has been achieved by preparing tetraazaporphyrins (TAPs) with C_4h, D_2h, C_2v, and C_s symmetry due to the relative arrangement of peripheral tert‐butylamino and cyano groups as push and pull substituents, respectively. The four structural isomers were successfully isolated and characterized by ¹H NMR spectroscopy and X‐ray crystallography. The band morphology in the Q‐band region varies depending on the molecular symmetry due to the significant perturbation introduced into the chromophore by the push and pull substituents. The C_4h and C_2v isomers exhibit a single Q band, whereas the Q bands of the D_2h and C_s isomers show a marked splitting. The magnetic circular dichroism spectra indicate that the push–pull TAPs retain the properties of the 16‐membered 18π‐electron perimeter generally observed for porphyrinoids. Theoretical calculations have demonstrated that the perturbation introduced by the substituents lowers the D_4h symmetry of the parent TAP π‐conjugated system, and this results in significant spectral changes. A novel approach to the fine‐tuning of the spectral properties of porphyrinoids based on changes in the chromophore symmetry is described.     

High Diastereoselection of a Dissymmetric Capsule by Chiral Guest Complexation

Encapsulation of chiral guests in the dissymmetric capsule 1?4 BF₄ formed diastereomeric supramolecular complexes G ? 1?4 BF₄ ( G : guest). When chiral guests 2 a – q were encapsulated within the dissymmetric space of the self‐assembled capsule 1?4 BF₄, circular dichroism (CD) was observed at the absorption bands that are characteristic of the π–π* transition of the bipyridine moiety of the capsule, which suggests that the P and M helicities of the capsule are biased by the chiral guest complexation. The P helicity of diastereomeric complex (S)‐ 2 l ? 1?4 BF₄ was determined to be predominant, based on CD exciton coupling theory and DFT calculations. The diastereoselectivity was highly influenced by the ester substituents, such that benzyl ester moieties were good for improving the diastereoselectivity. A diastereomeric excess of 98 % was achieved upon the complexation of 2 j . The relative enthalpic and entropic components for the distereoselectivity were obtained from a van’t Hoff plot. The enthalpic components were linearly correlated with the substituent Hammett parameters (σ_p⁺). The electron‐rich benzyl ester moieties generated donor–acceptor π–π stacking interactions with the bipyridine moiety, which resulted in a significant difference in energy between the predominant and subordinate diastereomeric complexes.     

Thermodynamic Control of Domain Swapping by Modulating the Helical Propensity in the Hinge Region of Myoglobin

Domain swapping is an exception to Anfinsen's dogma, and more than one structure can be produced from the same amino acid sequence by domain swapping. We have previously shown that myoglobin (Mb) can form a domain‐swapped dimer in which the hinge region is converted to a helical structure. In this study, we showed that domain‐swapped dimerization of Mb was achieved by a single Ala mutation of Gly at position 80. Multiple Ala mutations at positions 81 and 82 in addition to position 80 facilitated dimerization of Mb by stabilization of the dimeric states. Domain swapping tendencies correlated well with the helical propensity of the mutated residue in a series of Mb mutants with amino acids introduced to the hinge region. These findings demonstrate that a single mutation in the hinge loop to modify helical propensity can control oligomer formation, providing new ideas to create high‐order protein oligomers using domain swapping.     

Studies on the syntheses of polymetalloxanes and their properties as a precursor for amorphous oxide. IV. Properties of SiO2–TiO2 oxide fibers from polytitanosiloxane

From polytitanosiloxanes (PTS), SiO₂–TiO₂ oxide fibers with fairly good tensile strength were prepared, and their mechanical and thermal properties were investigated. The precursor fibers PTS-0.5 and PTS-1.0 were obtained by dry spinning of a highly viscous PTS solution which were formed as the reaction mixture of silicic acid (SA) with bis(2,4-pentanedionato)titanium diisopropoxide (PTP) in the molar ratios (SA/PTP) of 0.5 and 1.0. The precursor fibers PTS-0.5 were too brittle to measure their tensile strength, whereas PTS-1.0 and the heat-treated fibers were found to have tensile strength of 130 (precursor), 540 (500°C), and 450 (900°C) MPa, respectively. Heat-treatment of the fibers PTS-1.0 at above 1000°C forms anatase and rutile of titanium dioxide. The crystallization is resulted from the unreacted PTP which is not incorporated into the polymer network.     

Reactions of 2-Pyridyl Substituted Phosphine Oxides and Phosphonium Salts with Organometallic Reagents and in Aqueous Media

Phosphine oxides bearing two or three 2-pyridyl groups react with organometallic reagents affording 2,2′-bipyridyl, 2-substituted pyridines and pyridine in good yields. Phosphonium salts and phosphine oxides, bearing at least two 2-pyridyl or substituted 2-pyridyl groups also give the corresponding 2,2′-bipyridyls and pyridines upon treatment with acid or neutral solvents such as water and alcohols in substantial yields. The 2,2′-bipyridyls are considered to be formed by ligand coupling within the pentacoordinated phosphorus intermediate formed incipiently during the reaction.