Enhancement of the Protective Activity of Vanillic Acid against Tetrachloro-Carbon (CCl4) Hepatotoxicity in Male Rats by the Synthesis of Silver Nanoparticles (AgNPs)

In the current study, the hepatoprotective activity of vanillic acid, silymarin, and vanillic acid-loaded silver nanoparticles (AgNPs) against CCl₄-induced hepatotoxicity was tested in male rats for four weeks. Thirty male rats were divided into five groups (n = 6). The 1st group was a negative control, the 2nd group was a positive control, the 3rd group was treated with 100 mg/kg b.w. of vanillic acid, the 4th group was treated with 100 mg/kg b.w. of vanillic acid–AgNPs, and the 5th group was treated with 50 mg/kg b.w. of silymarin. The CCl₄-induced hepatic toxicity in the 2nd group was revealed by the liver function and all other biochemical tests. Liver enzymes, bilirubin, lipid peroxidation, lactate dehydrogenase, and interleukin-6 were elevated, whereas, total protein, antioxidant enzymes, and irisin were decreased compared to the negative control. The hepatic tissues were also injured as a result of the CCl₄-induced hepatotoxicity. Treating the hepatotoxic rats with vanillic acid moderately protected the rats of the 3rd group, whereas treatment with vanillic AgNPs and silymarin in G4 and G5, respectively, greatly protected the rats against the CCl₄ hepatotoxicity, approaching the normal biochemical levels and liver tissue appearance. The biochemical tests were confirmed by the histological investigations of liver tissue.     

Autotandem Catalysis: Inexpensive and Green Access to Functionalized Ketones by Intermolecular Iron-Catalyzed Amidoalkynylation/Hydration Cascade Reaction via N-Acyliminium Ion Chemistry

Iron-based catalysts were applied in cascade-type reactions for the synthesis of different carbonyl compounds. The reactions proceeded by a new iron-catalyzed cascade of alkynylation/hydration by using both the σ- and π-Lewis acid properties of iron salts. The alkynylation reactions of several endo and exocyclic acetoxylactams were achieved with three different catalysts including FeCl₃ ⋅ 6H₂O, FeCl₃, and Fe(OTf)₃ showing the efficiency of σ-Lewis acidity of iron (III) salts in catalyzing the alkynylation reaction. We also demonstrated that the reaction sequence could be shortened by the direct use of hydroxylactams, leading to an environmentally friendly protocol, avoiding the need to perform unnecessary lengthy steps. A combination of the hard/soft iron Lewis acid properties was then used to implement an unprecedented tandem intermolecular alkynylation/intramolecular hydration sequence allowing expedient access to a new carbonyl structures from trivial materials.     

Radiation synthesis of porous calcium silicate aerogel derived from polyacrylamide hydrogel as thermal insulator

Journal of Sol-Gel Science and Technology - In this article, the first aerogels synthesis through cross-linked polyacrylamide (PAAm) hydrogel was reported through the use of gamma irradiation...     

Experimental and Theoretical Studies on Extract of Date Palm Seed as a Green Anti-Corrosion Agent in Hydrochloric Acid Solution

Extracts from plant materials have great potential as alternatives to inorganic corrosion inhibitors, which typically have harmful consequences. Experimental and theoretical methodologies studied the effectiveness of agricultural waste, namely, date palm seed extract as a green anti-corrosive agent in 0.5 M hydrochloric acid. Experimental results showed that immersion time and temperature are closely related to the effectivity of date palm seed as a corrosion inhibitor. The inhibition efficiency reduced from 95% to 91% at 1400 ppm when the immersion time was increased from 72 h to 168 h. The experimental results also indicated that the inhibition efficiency decreased as the temperature increased. The presence of a protective layer of organic matter was corroborated by scanning electron microscopy. The adsorption studies indicated that date palm seed obeyed Langmuir adsorption isotherm on the carbon steel surface, and Gibbs free energy values were in the range of −33.45 to −38.41 kJ·mol⁻¹. These results suggested that the date palm seed molecules interacted with the carbon steel surface through mixture adsorption. Theoretical calculations using density functional theory showed that the capability to donate and accept electrons between the alloy surface and the date palm seed inhibitor molecules is critical for adsorption effectiveness. The HOMO and LUMO result indicated that the carboxyl (COOH) group and C=C bond were the most active sites for the electron donation-acceptance type of interaction and most auxiliary to the adsorption process over the Fe surface.     

Degrees-Of-Freedom in Multi-Cloud Based Sectored Cellular Networks

This paper investigates the achievable per-user degrees-of-freedom (DoF) in multi-cloud based sectored hexagonal cellular networks (M-CRAN) at uplink. The network consists of N base stations (BS) and K≤N base band unit pools (BBUP), which function as independent cloud centers. The communication between BSs and BBUPs occurs by means of finite-capacity fronthaul links of capacities CF=μF·12log(1+P) with P denoting transmit power. In the system model, BBUPs have limited processing capacity CBBU=μBBU·12log(1+P). We propose two different achievability schemes based on dividing the network into non-interfering parallelogram and hexagonal clusters, respectively. The minimum number of users in a cluster is determined by the ratio of BBUPs to BSs, r=K/N. Both of the parallelogram and hexagonal schemes are based on practically implementable beamforming and adapt the way of forming clusters to the sectorization of the cells. Proposed coding schemes improve the sum-rate over naive approaches that ignore cell sectorization, both at finite signal-to-noise ratio (SNR) and in the high-SNR limit. We derive a lower bound on per-user DoF which is a function of μBBU, μF, and r. We show that cut-set bound are attained for several cases, the achievability gap between lower and cut-set bounds decreases with the inverse of BBUP-BS ratio 1r for μF≤2M irrespective of μBBU, and that per-user DoF achieved through hexagonal clustering can not exceed the per-user DoF of parallelogram clustering for any value of μBBU and r as long as μF≤2M. Since the achievability gap decreases with inverse of the BBUP-BS ratio for small and moderate fronthaul capacities, the cut-set bound is almost achieved even for small cluster sizes for this range of fronthaul capacities. For higher fronthaul capacities, the achievability gap is not always tight but decreases with processing capacity. However, the cut-set bound, e.g., at 5M6, can be achieved with a moderate clustering size.     

Combining TOUGH2 and FLAC3D to Solve Problems in Underground Gas Storage

This paper describes modeling studies assessing the feasibility of increasing the maximum storage pressure in several underground natural gas storage reservoirs. This required an assessment of the potential for gas transport in the caprock and the geomechanical response to pressure change in the storage reservoir. To solve this problem in an efficient manner, two-phase flow (TOUGH2) and geomechanical (FLAC3D) models were combined in series. The TOUGH2 model was calibrated to fit pressure data collected on-site, from both the reservoir and caprock. The mechanical response of the caprock to increased storage pressure was modeled using FLAC3D, allowing assessment of the induced stresses in formations surrounding the reservoirs. We focused on two sites. In the first, field data were obtained from a deep borehole above the gas reservoir, which provided indirect observations of the geomechanical response of the caprock to pressure changes in the reservoir. In the second, open boreholes intersecting two thin caprock units immediately above the reservoir allowed gas flow to a shallower unit, significantly impacting the modeled fracture gradient.     

Spectrofluorimetric determination of melamine formaldehyde in solid and liquid forms and in wastewater

A new, simple and sensitive spectrofluorimetric method for determination of trace amount of melamine formaldehyde (MF) was developed. In phosphate buffer solution of pH 7.4 MF can remarkably quench the luminescence intensity of toluylene red (NR) at λ_em = 590 nm due to formation of NR-MF ion associate complex. The luminescence intensity of NR-MF complex was in proportion to the concentration of MF and used as photo probe for its determination. The dynamic range for the determination of MF is 7.5–52.5 ppm with detection limit of 4.4 ppm. The method is relatively free from interferences from coexisting substances and used successfully for the determining of MF in powder and liquid forms and in wastewater produced from MF industries. The average recoveries and standard deviations of 98.3 ± 0.6, 98.1 ± 0.6 and 97.3 ± 0.5% were achieved for determination of MF in solid, liquid forms and wastewater, respectively     

Dual Hard/Soft Gold Catalysis: Intermolecular Friedel–Crafts‐Type α‐Amidoalkylation/Alkyne Hydroarylation Sequences by N‐Acyliminium Ion Chemistry

Gold catalysts have been applied in cascade‐type reactions for the synthesis of different nitrogen‐based compounds. The reactions likely proceed by a new gold‐catalyzed cascade intermolecular α‐amidoalkylation/intramolecular carbocyclization cascade process by unifying both the σ‐ and π‐Lewis acid properties of the gold salts. In the first part of this report we show that the σ‐Lewis acidity of gold(I) and gold(III) could be exploited to efficiently catalyze the nucleophilic substitution of various alkoxy‐ and acetoxylactams. The reaction was found to be applicable to a wide range of cyclic N‐acyliminium ion precursors and various nucleophiles, including allyltrimethylsilane, silyl enol ethers, arenes, and active methylene derivatives. As a logical progression of this study, a combined hard/soft binary catalytic gold system was then used to implement an unprecedented tandem intermolecular Friedel–Crafts amidoalkylation/intramolecular hydroarylation sequence allowing an expedient access to new, complex, fused polyheterocyclic structures from trivial materials.     

Photoinduced effects on the optical constants of a-Ge–Se–Bi chalcogenide glassy thin films

In addition to the conversion from p-type to n-type conductivity that occurs in Ge–Se–Bi thin films when Bi is incorporated in a certain concentration. We found that, when these films were illuminated to UV light, after being annealed at glass transition temperature T _g, the photobleaching is dominant for Ge₂₀Se_80?x Bi _x (x=0, 2.5, and 5 at.%), while for Ge₂₀Se_72.5Bi_7.5 photodarkening is dominant. The photoinduced changes in the optical constants were studied. The refractive index (n) has been analysed according to the Wwmple–DiDominico single oscillator model and the values of E _o and E _d for exposed and unexposed films were determined, respectively. The photostructural effects were discussed in the light of single–double well model proposed by Tanaka and chemical bond approach.     

Invasive weed optimization for model order reduction of linear MIMO systems

In this work, a model order reduction (MOR) technique for a linear multivariable system is proposed using invasive weed optimization (IWO). This technique is applied with the combined advantages of retaining the dominant poles and the error minimization. The state space matrices of the reduced order system are chosen such that the dominant eigenvalues of the full order system are unchanged. The other system parameters are chosen using the invasive weed optimization with objective function to minimize the mean squared errors between the outputs of the full order system and the outputs of the reduced order model when the inputs are unit step. The proposed algorithm has been applied successfully, a 10th order Multiple-Input–Multiple-Output (MIMO) linear model for a practical power system was reduced to a 3rd order and compared with recently published work.