Barium isotope fractionation during experimental formation of the double carbonate BaMn[CO3](2) at ambient temperature

In this study, we present the first experimental results for stable barium (Ba) isotope ((137)Ba/(134)Ba) fractionation during low-temperature formation of the anhydrous double carbonate BaMn[CO(3)](2). This investigation is part of an ongoing work on Ba fractionation in the natural barium cycle. Precipitation at a temperature of 21±1°C leads to an enrichment of the lighter Ba isotope described by an enrichment factor of-0.11±0.06‰ in the double carbonate than in an aqueous barium-manganese(II) chloride/sodium bicarbonate solution, which is within the range of previous reports for synthetic pure BaCO (3) (witherite) formation.     

Antifungal activity, toxicity and chemical composition of the essential oil of Coriandrum sativum L. fruits

The aims of this study were to test the antifungal activity, toxicity and chemical composition of essential oil from C. sativum L. fruits. The essential oil, obtained by hydro-distillation, was analyzed by gas chromatography/mass spectroscopy. Linalool was the main constituent (58.22%). The oil was considered bioactive, showing an LC?? value of 23 μg/mL in the Artemia salina lethality test. The antifungal activity was evaluated against Microsporum canis and Candida spp. by the agar-well diffusion method and the minimum inhibitory concentration (MIC) and the minimum fungicidal concentration (MFC) were established by the broth microdilution method. The essential oil induced growth inhibition zones of 28 ± 5.42 and 9.25 ± 0.5 for M. canis and Candida spp. respectively. The MICs and MFCs for M. canis strains ranged from 78 to 620 and 150 to 1,250 μg/mL, and the MICs and MFCs for Candida spp strains ranged from 310 to 620 and 620 to 1,250 μg/mL, respectively. C. sativum essential oil is active in vitro against M. canis and Candida spp. demonstrating good antifungal activity.     

Directed evolution of sortase A mutants with altered substrate selectivity profiles

The ligation of two polypeptides in a chemoselective manner by the bacterial transpeptidase sortase A has become a versatile tool for protein engineering approaches. When sortase-mediated ligation is used for protein semisynthesis, up to four mutations resulting from the strict requirement of the LPxTG sorting motif are introduced into the target protein. Here we report the directed evolution of a mutant sortase A that possesses broad substrate selectivity. A phage-display screen of a mutant sortase library that was randomized in the substrate recognition loop was used to isolate this mutant. The altered substrate selectivity represents a gain-of-function that was exploited for the traceless semisynthesis of histone H3. Our report is a decisive step toward a platform of engineered sortases with distinct ligation properties that will conceivably allow for more versatile assemblies of modified proteins in biotechnological approaches.     

A Bioorthogonal Click Chemistry Toolbox for Targeted Synthesis of Branched and Well-Defined Protein–Protein Conjugates

Bioorthogonal chemistry holds great potential to generate difficult-to-access protein–protein conjugate architectures. Current applications are hampered by challenging protein expression systems, slow conjugation chemistry, use of undesirable catalysts, or often do not result in quantitative product formation. Here we present a highly efficient technology for protein functionalization with commonly used bioorthogonal motifs for Diels–Alder cycloaddition with inverse electron demand (DA_inv). With the aim of precisely generating branched protein chimeras, we systematically assessed the reactivity, stability and side product formation of various bioorthogonal chemistries directly at the protein level. We demonstrate the efficiency and versatility of our conjugation platform using different functional proteins and the therapeutic antibody trastuzumab. This technology enables fast and routine access to tailored and hitherto inaccessible protein chimeras useful for a variety of scientific disciplines. We expect our work to substantially enhance antibody applications such as immunodetection and protein toxin-based targeted cancer therapies.     

Production and Properties of Two Novel Exopolysaccharides Synthesized by a Thermophilic Bacterium Aeribacillus pallidus 418

Synthesis of innovative exocellular polysaccharides (EPSs) was reported for few thermophilic microorganisms as one of the mechanisms for surviving at high temperature. Thermophilic aerobic spore-forming bacteria able to produce exopolysaccharides were isolated from hydrothermal springs in Bulgaria. They were referred to four species, such as Aeribacillus pallidus, Geobacillus toebii, Brevibacillus thermoruber, and Anoxybacillus kestanbolensis. The highest production was established for the strain 418, whose phylogenetic and phenotypic properties referred it to the species A. pallidus. Maltose and NH₄Cl were observed to be correspondingly the best carbon and nitrogen sources and production yield was increased more than twofold in the process of culture condition optimization. After purification of the polymer fraction, a presence of two different EPSs, electroneutral EPS 1 and negatively charged EPS 2, in a relative weight ratio 3:2.2 was established. They were heteropolysaccharides consisting of unusual high variety of sugars (six for EPS 1 and seven for EPS 2). Six of the sugars were common for both EPSs. The main sugar in EPS 1 was mannose (69.3 %); smaller quantities of glucose (11.2 %), galactosamine (6.3 %), glucosamine (5.4 %), galactose (4.7 %), and ribose (2.9 %) were also identified. The main sugar in EPS 2 was also mannose (33.9 %), followed by galactose (17.9 %), glucose (15.5 %), galactosamine (11.7 %), glucosamine (8.1 %), ribose (5.3 %), and arabinose (4.9 %). Both polymers showed high molecular weight and high thermostability.     

Nitro-phenylalanine: a novel sensor for heat transfer in peptides

Femtosecond IR-pump-IR-probe experiments with independently tunable pulses are used to monitor the ultrafast response of selected IR absorption bands to vibrational excitation of other modes of Fmoc-nitrophenylalanine. The absorptions of both NO(2)-bands change rapidly within <2 ps upon excitation of other vibrational modes. The results point to considerable coupling between the monitored NO(2) modes and the initially excited modes or low-frequency modes. The latter are populated by a rapid energy redistribution process. The strong IR absorption of the NO(2) stretching bands and the intense coupling to other modes makes the nitro group of nitrophenylalanine a sensitive monitor for vibrational energy arriving at this amino acid.     

Plasma-Assisted Pretreatment of Wheat Straw for Ethanol Production

The potential of wheat straw for ethanol production after pretreatment with O(3) generated in a plasma at atmospheric pressure and room temperature followed by fermentation was investigated. We found that cellulose and hemicellulose remained unaltered after ozonisation and a subsequent washing step, while lignin was degraded up to 95% by O(3). The loss of biomass after washing could be explained by the amount of lignin degraded. The washing water of pretreated samples (0-7 h) was analyzed for potential fermentation inhibitors. Approximately 30 lignin degradation products and a number of simple carboxylic acids and phenolic compounds were found, e.g., vanillic acid, acetic acid, and formic acid. Some components had the highest concentration at the beginning of the ozonisation process (0.5, 1 h), e.g., 4-hydroxybenzladehyde, while the concentration of others increased during the entire pretreatment (0-7 h), e.g., oxalic acid and acetovanillon. Interestingly, washing had no effect on the ethanol production with pretreatment times up to 1 h. Washing improved the glucose availability with pretreatment times of more than 2 h. One hour of ozonisation was found to be optimal for the use of washed and unwashed wheat straw for ethanol production (maximum ethanol yield, 52%). O(3) cost estimations were made for the production of ethanol at standard conditions.     

Nanoindentation of glass wool fibers

The nanoindentation technique is used to analyze the depth dependence of the hardness and the reduced elastic modulus of bulk glasses and glass wool fibers (4-12 μm in diameter) of calcium aluminosilicate composition. In spite of the fiber geometry and the delicate sample mounting-technique, nanoindentation proves to be a relatively accurate method that provides reproducible data for both hardness (H) and reduced elastic modulus (E_r) of thin glass fibers. It is found that H and E_r are generally lower for the fiber than for the bulk sample. Within a given fiber, both H and E_r are approximately constant with increasing indentation depth. However, both of these parameters decrease with diminishing fiber diameter. This trend is attributed to an increase of the free volume of the fibers with decreasing fiber diameter, i.e. to an increase of the fictive temperature.     

Solvent-Enhanced Conformational Flexibility of Cyclic Tetrapeptides

Solvent and temperature can affect the structural properties of cyclic peptides by controlling their flexibility. Here, we investigate two cyclic peptides, featuring beta turns. Using temperature-dependent NMR and FT-IR, we observed a pronounced temperature effect on the conformation of the cyclic peptide D-1 in CHCl₃ but a much smaller effect in CH₃CN. Almost no effect was observed for its diastereomer L-1 within a similar temperature range and using the same solvents. With the aid of Replica Exchange Molecular Dynamics simulations and Quantum Mechanics/Molecular Mechanics calculations, we were able to explain this behavior based on the increased flexibility of D-1 (in CHCl₃) in terms of intramolecular hydrogen bonding. The largest temperature dependence is observed for D - 1 in CHCl₃, while the temperature effect is less pronounced for L-1 in CHCl₃ and for both peptides in CH₃CN. This work provides new insights into the role of the environment and temperature on the conformations of cyclic peptides.