Antibacterial glass films prepared on metal surfaces by sol–gel method

This paper describes the preparation and characterization of glass films consisting of SiO₂, Li₂O, Na₂O, K₂O or MgO in varying compositions on stainless steel and aluminum substrates by sol–gel method. Silver phosphate or silver incorporated zeolite was also introduced into the sols for obtaining antibacterial effect. The SiO₂/Li₂O/Na₂O system having the composition of 85:5:10 wt% was found as the optimum for obtaining a stable sol and film formation. The films were investigated by scanning electron microscopy (SEM) and electron dispersive analysis by X-ray (EDX), Fourier transformed infrared (FTIR) spectroscopy, thermo-gravimetric analysis (TGA) and differential thermal analysis (DTA). Homogenous films having 300 ± 20 nm thicknesses were formed by spin coating and then by curing at 500 °C for 1 h. Obtained films had high adherence to the metal substrates and they were also durable in acidic, basic or NaCl environments. They also presented a powerful antibacterial effect against E. coli.     

LiMSO(4)F (M = Fe, Co and Ni): promising new positive electrode materials through the DFT microscope

A theoretical study of the lithium intercalated LiMSO(4)F and deintercalated MSO(4)F systems, where M = Fe, Co and Ni has been performed within the framework of density functional theory. Beyond predictions of structural evolution and average voltages versus a lithium electrode, we have applied partial density of states and Bader's topological analysis of the electron density to the study of lithium deintercalation. Upon lithium extraction, charge rearrangement occurs for nickel between different d-orbitals, but with little net positive charge gain, while cobalt and iron atoms end up with a clear oxidized state. The participation of oxygen ions in accepting the electron of the lithium is thus enhanced for LiNiSO(4)F. However, this effect does not affect the long-range electrostatic interactions a lot in the lithiated phase, since the valence of all transition metals is very close due to initial lower oxidized state for the Ni atom in the host. It is found that this is not essentially a long-range electrostatic interaction within the lithiated phase but within the host which explains, at least partly, the increase in voltage by passing from Fe to Ni. Our results also shed light upon the possibility of getting an approximate evaluation of the local strain associated with delithiation from the atomic volume evolutions, which are also likely to affect the electrochemical potential.     

MOCVD growth and optical properties of non-polar (1 1–2 0) a-plane GaN on (1 0–1 2) r-plane sapphire substrate

Non-polar a-plane GaN film with crystalline quality and anisotropy improvement is grown by use of high temperature AlN/AlGaN buffer, which is directly deposited on r-plane sapphire by pulse flows. Compared to the a-plane GaN grown on AlN buffer, X-ray rocking curve analysis reveals a remarkable reduction in the full width at half maximum, both on-axis and off-axis. Atomic force microscopy image exhibits a fully coalesced pit-free surface morphology with low root-mean-square roughness (∼1.5 nm). Photoluminescence is carried out on the a-plane GaN grown on r-plane sapphire. It is found that, at low temperature, the dominant emission at ∼3.42 eV is composed of two separate peaks with different characteristics, which provide explanations for the controversial attributions of this peak in previous studies.     

Poly(2‐oxazoline)s as Smart Bioinspired Polymers

Poly(2‐alkyl‐2‐oxazoline)s can be regarded as pseudo‐peptides or bioinspired polymers, which are available through living/controlled cationic polymerization and polymer (“click”) modification procedures. Materials and solution properties may be adjusted via the nature of the side chain (hydrophilic‐hydrophobic, chiral, bio‐functional, etc.), opening the way to stimulus‐responsive materials and complex colloidal structures in aqueous environments. Herein, we give an overview over the macromolecular engineering of polyoxazolines, including the synthesis of biohybrids, and the “smart”/bioinspired aggregation behavior in solution.

     

Power‐law scaling of structured poly(p‐xylylene) films deposited by oblique angle

This study describes the evolution and growth of structured polymers by oblique angle deposition of poly(p‐xylylene) (PPX) derivatives. The deposition of structured PPX polymers have been demonstrated recently, but the mechanism of growth has not been studied. Here, we provide experimental evidence for the growth of structured PPX polymers by an atomic force microscope, electron microscope, and a profilometer. Individual columns expand with respect to their heights according to a power‐law, d = ch^p, where d is the column diameter, c and p are constants, and h is the height of a column. Values of p for structured poly(chloro‐p‐xylylene), poly(trifloroacetly‐p‐xylylene‐co‐p‐xylylene), and poly(bromo‐p‐xylylene) films are estimated as 0.11 ± 0.01, 0.15 ± 0.01, and 0.18 ± 0.01, respectively. This result is different from the traditional oblique angle deposition processes of nonpolymeric materials where the surface diffusion is low. Further analysis with two‐dimensional power spectral density (PSD) method showed that the ordering of columns is quasi‐periodic. Additionally, the X‐ray and transmission electron microscope characterization of the columns revealed that the columns are semicrystalline. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 640–648, 2008     

Surface phenomena related to mirror degradation in extreme ultraviolet (EUV) lithography

One of the most promising methods for next generation device manufacturing is extreme ultraviolet (EUV) lithography, which uses 13.5 nm wavelength radiation generated from freestanding plasma-based sources. The short wavelength of the incident illumination allows for a considerable decrease in printed feature size, but also creates a range of technological challenges not present for traditional optical lithography. Contamination and oxidation form on multilayer reflecting optics surfaces that not only reduce system throughput because of the associated reduction in EUV reflectivity, but also introduce wavefront aberrations that compromise the ability to print uniform features. Capping layers of ruthenium, films ∼2 nm thick, are found to extend the lifetime of Mo/Si multilayer mirrors used in EUV lithography applications. However, reflectivities of even the Ru-coated mirrors degrade in time during exposure to EUV radiation. Ruthenium surfaces are chemically reactive and are very effective as heterogeneous catalysts. In the present paper we summarize the thermal and radiation-induced surface chemistry of bare Ru exposed to gases; the emphasis is on H₂O vapor, a dominant background gas in vacuum processing chambers. Our goal is to provide insights into the fundamental physical processes that affect the reflectivity of Ru-coated Mo/Si multilayer mirrors exposed to EUV radiation. Our ultimate goal is to identify and recommend practices or antidotes that may extend mirror lifetimes.     

Effect of Pore-Forming Agent Type on Swelling Properties of Macroporous Poly(N-[3-(dimethylaminopropyl)]-methacrylamide-co-acrylamide) Hydrogels

Macroporous poly(N-[3-(dimethylaminopropyl)]methacrylamide-co-acrylamide) [P(DMAPMA-co-AAm)] hydrogels were prepared by free-radical crosslinking copolymerization of corresponding monomers in water using two different pore-forming agents such as hydroxypropyl celluose (HPC) and poly(ethylene glycol) (PEG). The effect of these pore-forming agents on the volume phase transition temperature (VPT-T), interior morphology and swelling/deswelling kinetics of the P(DMAPMA-co-AAm) hydrogels was investigated. Scanning electron micrographs revealed that the interior network structure of the hydrogel matrix became more porous due to the presence of HPC or PEG pore-forming agents. The more porous matrix provided numerous water channels for water diffusion in or out of the matrix and, therefore, an improved response rate to the external stimuli. Particularly, due to its unique macroporous structure, the PEG-modified hydrogel showed a tremendously faster response to the external temperature changes during deswelling process and the swelling process at 22°C.     

A New Multiresponsive Drug Delivery System using Smart Nanogels

This paper addresses the synthesis and characterization of a novel temperature‐ and pH‐responsive nanogel system based on poly(vinylcaprolactam‐co‐2‐dimethylaminoethyl methacrylate) [P(VCL‐co‐DMAEMA)] by using a surfactant‐free emulsion polymerization procedure for the multiresponsive drug delivery of hydrophobic drugs. The effects of solvent, monomer, pH, and temperature were studied to tailor the average particle hydrodynamic diameters and the polydispersity index of the final particles. According to dynamic light‐scattering measurements, the obtained nanogels show a narrow particle‐size distribution and their hydrodynamic diameters can be varied from 81 to 368 nm. The nanogels display a re‐entrant phase‐transition state, and the equilibrium volume swelling ratio of the nanogels decreases drastically down to 47 °C and then increases up to 65 °C. In addition, the nanogels show pH‐dependent behavior. They exhibit a maximum size at pH 5.0. Rhodamine B (RhB) was chosen as a model compound for drug loading and release studies from P(VCL‐co‐DMAEMA) on the basis of particles in different phosphate buffer solutions at different temperatures. The temperature/pH‐dependent cumulative release and ultrasound‐enhanced pulsatile release properties were investigated for RhB‐loaded nanogels for long‐term and one‐shot delivery. The nanogels display efficient delivery for both long‐term and one‐shot delivery systems. We provide here a proof of concept for the novel use of multiresponsive nanogels having an overall size below 200 nm as a cargo system for hydrophobic drugs and for controlled release mediated by temperature/pH and ultrasound.     

CuO Nanostructures Based Electrochemical Sensor for Simultaneous Determination of Hydroquinone and Ascorbic Acid

A simple, sensitive and reliable electrochemical sensor has been developed based on CuO nanostructures modified glassy carbon electrode for simultaneous determination of hydroquinone (HQ) and ascorbic acid (AA). The CuO nano material was synthesized by aqueous chemical growth method using different sources of OH. The characterization of nano material was performed by Fourier transform infrared spectroscopy, X‐ray diffraction, field emission scanning electron microscopy and energy dispersive X‐ray spectroscopy. The glassy carbon electrode was modified by CuO nano material using drop cast method and studied by cyclic voltammetry. The CuO/GCE exhibited excellent electrocatalytic activity towards the oxidations of HQ and AA in borate buffer solution (pH 8.0) and the corresponding electrochemical signals have appeared as two well resolved oxidation peaks with significant peak potential differences of (0.21V vs. Ag/AgCl). Differential pulse voltammetry was used for simultaneous determination of HQ and AA using the CuO/GCE. At the optimum conditions, for simultaneous determination by synchronous change of the analyte concentrations, the linear response ranges were between 0.0003–0.355 mM for HQ and 0.0001–0.30 mM for AA respectively. Furthermore, CuO/GCE was successfully applied for the independent determination of AA in fruit juices as well as for the simultaneous determination of HQ and AA in cosmetic samples.     

Changes in the mechanical properties of tooth-colored direct restorative materials in relation to time

The objective of this study was to determine the flexural strength, flexural modulus, Vickers hardness of a packable composite (Surefil), and an ormocer (Definite) in comparison with a microhybrid composite (Z-100), a microfil composite (Silux Plus) and a polyacid-modified composite resin (Dyract). Flexural strength and flexural modulus were determined using a three-point bending device. Microhardness was measured with a Vickers indentor. The specimens of each material were prepared according to manufacturer's instructions. The specimens were stored in artificial saliva at pH 6, all at 37°C. The groups were tested at the beginning of the test, at 3 months and at 6 months. Flexural strength values of Surefil and Definite showed a progressive increase. The highest MPa values were determined for Surefil (134.4 MPa) and the lowest MPa values were obtained for Dyract (59.6 MPa). The highest flexural modulus values were revealed for Surefil (10.000 GPa). Z-100, Silux Plus and Definite showed a tendency to decline in relation to time for their flexural modulus. GPa values of Silux Plus were stable at 3 and 6 months. Vickers hardness numbers showed that Surefil was the hardest and Dyract was the weakest material. Copyright © 2003 John Wiley & Sons, Ltd.