Transition Metal Complexes of Dis(thiosemicarbazone): Synthesis and Spectral,and Antifungal Studies

Mn(II), Co(II), Ni(II), and Cu(II) complexes have been synthesized with benzil bis(thiosemicarbazone) (L) and characterized by elemental analyses, molar conductance measurements, magnetic susceptibility measurements, thermogravimetric studies, infrared (IR), electronic, and electron paramagnetic resonance (eEPR) spectral studies. The molar conductance measurements of the complexes in DMF correspond to the non-electrolytic nature of the complexes. Thus these complexes may be formulated as [M(L)X₂] (where M = Mn(II), Co(II), Ni(II), Cu(II) and X = Cl^? and NO₃ ^?). On the basis of IR, electronic, and EPR spectral studies, an octahedral geometry has been assigned for Mn(II), Co(II), and Ni(II) complexes, whereas a tetragonal geometry for the Cu(II) complexes is presumed. The free ligand and its metal complexes were tested against the phytopathogenic fungi (i.e., Rhizoctonia baticola, Alternaria alternata) in vitro.     

Comparative studies in subsolidus areas of ternary oxide systems PbO–V2O5–In2O3 and PbO–V2O5–Fe2O3

Thermal stability of PbO was studied. Reactivity of oxides in the systems PbO–M₂O₃ (M = In, Fe) was investigated up to 650 °C. Using the DTA and XRD methods, parts of investigated ternary oxide systems, labelled by compounds: V₂O₅, Pb₈V₂O₁₃ and M₂O₃ (M = In, Fe), have been divided into partial ternary systems. IR spectra of compounds Pb₂MV₃O₁₁ (M = In, Fe) have been compared.     

Prediction of extraction efficiency in supported liquid membrane with a stagnant acceptor phase by means of artificial neural network

An artificial neural network model of supported liquid membrane extraction process with a stagnant acceptor phase is proposed. Triazine herbicides and phenolic compounds were used as model compounds. The model is able to predict the compound extraction efficiency within the same family based on the octanol–water partition coefficient, water solubility, molecular mass and ionisation constant of the compound. The network uses the back‐propagation algorithm for evaluating the connection strengths representing the correlations between inputs (octanol–water partition coefficients logP, acid dissociation constant pK_a, water solubility and molecular weight) and outputs (extraction efficiency in dihexyl ether and undecane as organic solvents). The model predicted results in good agreement with the experimental data and the average deviations for all the cases are found to be smaller than ±3%. Moreover, standard statistical methods were applied for exploration of relationships between studied parameters.     

Mass spectrometric profiling of Bacillus cereus strains and quantitation of the emetic toxin cereulide by means of stable isotope dilution analysis and HEp-2 bioassay

A fast and robust high-throughput ultra-performance liquid chromatography/time-of-flight mass spectrometry (UPLC–TOF MS) profiling method was developed and successfully applied to discriminate a total of 78 Bacillus cereus strains into no/low, medium and high producers of the emetic toxin cereulide. The data obtained by UPLC–TOF MS profiling were confirmed by absolute quantitation of cereulide in selected samples by means of high-performance liquid chromatography with tandem mass spectrometry (HPLC–MS/MS) and stable isotope dilution assay (SIDA). Interestingly, the B. cereus strains isolated from four vomit samples and five faeces samples from patients showing symptoms of intoxication were among the group of medium or high producers. Comparison of HEp-2 bioassay data with those determined by means of mass spectrometry showed differences, most likely because the HEp-2 bioassay is based on the toxic action of cereulide towards mitochondria of eukaryotic cells rather than on a direct measurement of the toxin. In conclusion, the UPLC–electrospray ionization (ESI)–TOF MS and the HPLC–ESI–MS/MS–SIDA analyses seem to be promising tools for the robust high-throughput analysis of cereulide in B. cereus cultures, foods and other biological samples.

Development and validation of two LC-MS/MS methods for the detection and quantification of amphetamines, designer amphetamines, benzoylecgonine, benzodiazepines, opiates, and opioids in urine using turbulent flow chromatography

In the context of driving ability diagnostics in Germany, administrative cutoffs for various drugs and pharmaceuticals in urine have been established. Two liquid chromatography–tandem mass spectrometry methods for simultaneous detection and quantification of amphetamines, designer amphetamines, benzoylecgonine, benzodiazepines, opiates, and opioids in urine were developed and validated. A 500-μL aliquot of urine was diluted and fortified with an internal standard solution. After enzymatic cleavage, online extraction was performed by an ion-exchange/reversed-phase turbulent flow column. Separation was achieved by using a reversed-phase column and gradient elution. For detection, a Thermo Fisher TSQ Quantum Ultra Accurate Mass tandem mass spectrometer with positive electrospray ionization was used, and the analytes were measured in multiple-reaction monitoring mode detecting two transitions per precursor ion. The total run time for both methods was about 15 min. Validation was performed according to the guidelines of the Society of Toxicological and Forensic Chemistry. The results of matrix effect determination were between 78 % and 116 %. The limits of detection and quantification for all drugs, except zopiclone, were less than10?ng/mL and less than 25 ng/mL, respectively. Calibration curves ranged from 25 to 200 ng/mL for amphetamines, designer amphetamines, and benzoylecgonine, from 25 to 250 ng/mL for benzodiazepines, from 12.5 to 100 ng/mL for morphine, codeine, and dihydrocodeine, and from 5 to 50 ng/mL for buprenorphine and norbuprenorphine. Intraday and interday precision values were lower than 15 %, and bias values within?±?15 % were achieved. Turbulent flow chromatography needs no laborious sample preparation, so the workup is less time-consuming compared with gas chromatography–mass spectrometry methods. The methods are suitable for quantification of multiple analytes at the cutoff concentrations required for driving ability diagnostics in Germany.     

Enantioselective Extraction System Containing Binary Chiral Selectors and Chromatographic Enantioseparation Method for Determination of the Absolute Configuration of Enantiomers of Cyclopentolate

The distribution coefficients and enantioseparation of cyclopentolate were studied in an extraction system containing d-tartaric acid ditertbutyl ester in organic phase and 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) in aqueous phase. Various parameters involved in the enantioseparation such as the type and the concentration of chiral selectors, pH value and a wide range of organic solvents were investigated. The maximum enantioselectivity (α = 2.13) and optimum distribution coefficients (K _R = 0.85, K _S = 0.40) were obtained under the following conditions: 0.10 mol/L HP-β-CD in aqueous phase and 0.20 mol/L d-tartaric acid ditertbutyl ester in decanol as organic phase. Cyclopentolate is present as a racemic mixture to the aqueous phase. The potentially different biological activities of cyclopentolate enantiomers have not been examined yet. Two chiral liquid chromatography methods have been developed for the direct separation of the enantiomers of cyclopentolate. First method was used for the quantification analysis of cyclopentolate enantiomers in aqueous phase. Second method used two chiroptical detectors: electronic circular dichroism (ECD) and optical rotation (OR) for the identification of individual cyclopentolate enantiomers from the organic phase enriched with (R)-enantiomer. The absolute stereochemistry was determined by means of the comparison of the experimental and computed ECD spectra and signs of OR. The ECD spectra of chiral analytes were measured on-line using HPLC-ECD technique.

     

Selective formation of non-conjugated olefins by samarium(II)-mediated elimination/isomerization of allylic benzoates

Aromatic allylic benzoates can be selectively transformed to the corresponding benzoate eliminated olefin by the action of samarium diiodide. Depending on the substrate and the elimination conditions, high selectivity for the non-conjugated alkene product can be achieved.     

Functional silver nanostructured surfaces applied in SERS and SIMS

Present article deals with functionality of silver nanostructured surfaces prepared by potentiostatic electrochemical deposition on the paraffin impregnated graphite electrode as template‐free substrates. The effect of the electrodeposition conditions on two silver surface functions: analytical signal enhancement in Surface‐enhanced Raman spectroscopy and pre‐ionization function, applied in secondary ion mass spectrometry (SIMS) is reported. Functional silver nanostructured substrate was prepared at a potential ?850 mV with a deposition duration of 20 min. Analytical signal enhancement factors of 3.2 ×10⁵ for Raman peak at 649 cm^?1, 3.0×10⁵ for peak at 810 cm^?1 and 2.7×10⁵ for peak at 1539 cm^?1 were determined for Rhodamine 6G at deposited surface. Slight pre‐ionization effect has been observed in SIMS, and 1.2×10⁵ fold signal enhancement was established for fragment of Rhodamine 6G with m/z 429 (M‐CH₃‐Cl). Electrochemical preparation of nanostructures represents a step towards surface integration directly into miniaturized systems and sensors. Copyright © 2013 John Wiley & Sons, Ltd.     

FEW: A workflow tool for free energy calculations of ligand binding

In the later stages of drug design projects, accurately predicting relative binding affinities of chemically similar compounds to a biomolecular target is of utmost importance for making decisions based on the ranking of such compounds. So far, the extensive application of binding free energy approaches has been hampered by the complex and time‐consuming setup of such calculations. We introduce the free energy workflow (FEW) tool that facilitates setup and execution of binding free energy calculations with the AMBER suite for multiple ligands. FEW allows performing free energy calculations according to the implicit solvent molecular mechanics (MM‐PB(GB)SA), the linear interaction energy, and the thermodynamic integration approaches. We describe the tool's architecture and functionality and demonstrate in a show case study on Factor Xa inhibitors that the time needed for the preparation and analysis of free energy calculations is considerably reduced with FEW compared to a fully manual procedure. © 2013 Wiley Periodicals, Inc.     

Oriented polymer dispersed discotic liquid crystals

Polymer dispersed discotic liquid crystals (PDDLCs) were prepared using the hexa-n-octanoate of rufigallol (RHO) and three polymer matrices: polystyrene (PS), poly(methyl methacrylate) (PMMA) and poly(ethyl methacrylate) (PEMA). The molecular orientation of RHO in stretched PDDLC films was characterized by means of infrared dichroism. It was found that the stretching of films that contain RHO in both the columnar D1 and crystalline phase can effectively align columns of RHO along the stretching direction, with the short axes of the rigid cores lying in the plane of the film. By contrast with stretched polymer dispersed nematic liquid crystals, no orientation of RHO is induced for films stretched with RHO in the isotropic phase, followed by rapid cooling to room temperature. However, if stretched films are cooled under strain into the columnar D1 phase, orientation of RHO can develop with time.