Concentration effects on the dynamics of liquid crystalline self-assembly: time-resolved X-ray scattering studies

A manifold of ordering transitions relevant to chemical and biological systems occur at interfaces from liquids to self-assembled soft solids like membranes or liquid crystals. In the present case, we were interested in understanding the phase transition from the microemulsion phase to the liquid crystal phase in terms of their driving forces, i.e., activation energy and entropy. The purpose of this work was to clarify the influence of concentration effects of the amphiphilic molecules on the nature of these self-assembly processes. By photosensitization of the model system (polyalkylglycolether (C(10)E(4)), water, decane, and cyclohexane) with laser dyes, we could effectively induce and control the phase transition through the absorption of optical photons. The photo transformation conditions were chosen in such a way that the system was in thermal equilibrium. By application of time-resolved photo small-angle X-ray scattering we could monitor the conversion process and demonstrate that the surfactant concentration has a direct impact on the activation energy, which is observable through the length of the induction time.     

Synthesis and Magnetic Properties of Novel Azamacrocyclic LnIII,CuII, FeIII,and SrII Complexes and Conformational Analysis of the Ligands

Hexaalkoxy‐substituted azamacrocyclic metal complexes 1 · MX_n [MX_n = FeCl₃, CuCl₂, SrCl₂, Ln(NO₃)₃; Ln = La, Pr, Eu, Ho, Er] with various chain lengths were prepared by a convergent approach using 1,2‐bisalkoxy‐4,5‐diamines 3 and 4‐alkoxy‐pyridine‐2,6‐dicarbaldehydes 4 as key building blocks for template‐assisted cyclocondensation. Metal complexes 1 · MX_n were considered as potential metallomesogens. However, differential scanning calorimetry and optical polarizing microscopy of 1 · MX_n did not reveal any mesomorphism. The magnetic susceptibility shows deviation from Curie‐like behavior. Due to ligand field effects the effective magnetic moments are a function of the temperature. In order to obtain structural informations on the free ligand 1 , which is synthetically not accessible, theoretical calculations were carried out. For the free azamacrocycle 2a and the free hexamethoxy‐substituted azamacrocycle 1a the IR spectra were computed at the level of density functional theory. A planar and a saddle‐shaped conformation was considered. The IR spectra and especially the dependence of the C=N vibration on the structural parameters and the charge distribution are discussed.     

Self-assembly of supramolecular architectures and polymers by orthogonal metal complexation and hydrogen-bonding motifs

A modular construction kit with two orthogonal noncovalent binding sites for self-assembly of supramolecular architectures is presented. The heteroditopic building blocks contain a terpyridine (tpy) unit for coordination of metal ions and a Hamilton receptor for multiple H-bonding of cyanuric acid derivatives. The association constants of ligand binding of M(II) complexes (M=Ru, Zn, Fe, and Pt) with a dendritic end cap were determined to be in the range of 10(2) and 10(4) L mol(-1) in chloroform. The capabilities for binding of metal ions were investigated by (1)H NMR and UV/Vis spectroscopy. The Fe complexes are most appropriate for the generation of discrete and high-ordered architectures due to their strong tendency to form FeL(2) complexes. Superstructures are readily formed in a one-pot procedure at room temperature. No mutual interactions between the orthogonal binding motifs were observed, and this demonstrates the highly specific nature of each binding process. Decomplexation experiments were carried out to examine the reversibility of Fe-tpy coordination. Substitution of the terminal end cap with a homoditopic bis-cyanurate linkage leads to formation of an iron-containing supramolecular strand. Formation of coordination polymers was confirmed by viscosity measurements. The supramolecular polymer strands can be reversibly cleaved by addition of a terminating cyanuric acid building block, and this proves the dynamic nature of this noncovalent polymerization process.     

Coating of titanium implant materials with thin polymeric films for binding the signaling protein BMP2

A fast and simple approach for immobilization using copolymers as interlayers is reported. The synthesized copolymers form stable self-assembled layers on implant materials like, e.g., titanium in a simple coating/drying/washing sequence and have functional groups which can bind proteins from an aqueous solution. The copolymer films have been characterized via ellipsometry and contact angle measurements and were tested for biocompatibility. An immunoassay was used to determine the amount of BMP2 and demonstrated an approximately 10-fold increase as compared to previously used self-assembled monolayers. A BMP2-responsive cell line with luciferase detection was used to determine the biological activity of the bound signaling protein.     

Metabolite extraction from adherently growing mammalian cells for metabolomics studies: optimization of harvesting and extraction protocols

Trypsin/ethylenediaminetetraacetic acid (EDTA) treatment and cell scraping in a buffer solution were compared for harvesting adherently growing mammalian SW480 cells for metabolomics studies. In addition, direct scraping with a solvent was tested. Trypsinated and scraped cell pellets were extracted using seven different extraction protocols including pure methanol, methanol/water, pure acetone, acetone/water, methanol/chloroform/water, methanol/isopropanol/water, and acid–base methanol. The extracts were analyzed by GC-MS after methoximation/silylation and derivatization with propyl chloroformate, respectively. The metabolic fingerprints were compared and 25 selected metabolites including amino acids and intermediates of energy metabolism were quantitatively determined. Moreover, the influence of freeze/thaw cycles, ultrasonication and homogenization using ceramic beads on extraction yield was tested. Pure acetone yielded the lowest extraction efficiency while methanol, methanol/water, methanol/isopropanol/water, and acid–base methanol recovered similar metabolite amounts with good reproducibility. Based on overall performance, methanol/water was chosen as a suitable extraction solvent. Repeated freeze/thaw cycles, ultrasonication and homogenization did not improve overall metabolite yield of the methanol/water extraction. Trypsin/EDTA treatment caused substantial metabolite leakage proving it inadequate for metabolomics studies. Gentle scraping of the cells in a buffer solution and subsequent extraction with methanol/water resulted on average in a sevenfold lower recovery of quantified metabolites compared with direct scraping using methanol/water, making the latter one the method of choice to harvest and extract metabolites from adherently growing mammalian SW480 cells.     

Decomposition of P2S2N4(Si(CH3)3)4A12C14 as Studied by FT-Raman and Quantum Chemistry Means

The dimeric title compound decomposes upon heating to give the monomer and desulphurized monomer as shown by FT-Raman and quantum chemical means.     

Facilitating access to the most easily ionized molecule: an improved synthesis of the key intermediate, W2(hpp)4Cl2, and related compounds

A far superior synthesis is reported for W(2)(hpp)(4)Cl(2), a key intermediate in the synthesis of the most easily ionized closed-shell molecule W(2)(hpp)(4) (hpp = the anion of the bicyclic guanidine compound 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine). At 200 degrees C, the one-pot reaction of the air-stable and commercially available compounds W(CO)(6) and Hhpp in o-dichlorobenzene produces W(2)(hpp)(4)Cl(2) in multigram quantities with isolated yields of over 90%. At lower temperatures, the reaction can lead to other compounds such as W(Hhpp)(2)(CO)(4) or W(2)(mu-CO)(2)(mu-hpp)(2)(eta(2)-hpp)(2), which are isolable in good purity depending upon the specific conditions employed. These compounds provide insight into the reaction pathway to W(2)(hpp)(4)Cl(2) and W(2)(hpp)(4). Two additional derivatives, W(2)(hpp)(4)X(2) where X is PF(6)(-) or the anion tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (TFPB), have also been synthesized and structurally characterized. A comparison of the electrode potentials of W(2)(mu-CO)(2)(mu-hpp)(2)(eta(2)-hpp)(2) and the di-p-anisylformamidinate analogue shows that oxidation of the hpp compound is significantly displaced (1.12 V) and shows that the bicyclic guanidinate ligand is considerably better than the formamidinate anion at stabilizing high oxidation states. A differential pulse voltammogram of W(2)(hpp)(4)(TFPB)(2) in THF shows two reduction processes with an E(1/2) of -0.97 V for the first and -1.81 V (vs Ag/AgCl) for the second. DFT calculations on the W(2)(hpp)(4)(2+) units in W(2)(hpp)(4)X(2) compounds show that the metal-metal bonding orbitals are destabilized by the axial ligands, which accounts for significant variations in the W-W distances. The low-energy gas-phase ionizations of W(2)(hpp)(4) are also reported and discussed.     

Influence of particle-particle interactions and particles rotational motion in traveling wave dielectrophoresis

Traveling wave dielectrophoresis provides an interesting method for the controlled movement of microsized particles in suspended mixtures, and as such is a promising tool in microfluidic technology. In this case, the electrostatic force acting on the particles has two components: one due to the spatially varying magnitude of the electric field and the other due to the spatially varying phase. The actual movement of the particle is determined by the combined effect of these two forces and corresponding torques, the viscous drag exerted by the fluid on the particle, and the electrostatic and hydrodynamic particle-particle interactions. This paper presents the first numerical simulations of the motion of particles subjected to all previous forces and torques. Our technique is based on a finite-element scheme in which the particles are moved using a direct simulation scheme respecting the fundamental equations of motion for both the fluid and the solid particles. The fluid-particle motion is resolved by the method of distributed Lagrange multipliers and the electrostatic forces are computed using the point-dipole approximation. Our simulations show that the particle behavior strongly depends on the mismatch of the dielectric properties between the particles and the fluid, and that the particle-particle interaction force as well as particles rotation speeds play crucial roles in the various regimes.     

Vibronic coupling in organic semiconductors: the case of fused polycyclic benzene-thiophene structures

The nature of vibronic coupling in fused polycyclic benzene-thiophene structures has been studied using an approach that combines high-resolution gas-phase photoelectron spectroscopy measurements with first-principles quantum-mechanical calculations. The results indicate that in general the electron-vibrational coupling is stronger than the hole-vibrational coupling. In acenedithiophenes, the main contributions to the hole-vibrational coupling arise from medium- and high-frequency vibrations. In thienobisbenzothiophenes, however, the interaction of holes with low-frequency vibrations becomes significant and is larger than the corresponding electron-vibrational interaction. This finding is in striking contrast with the characteristic pattern in oligoacenes and acenedithiophenes in which the low-frequency vibrations contribute substantially only to the electron-vibrational coupling. The impact of isomerism has been studied as well.