Studies on Organophosphorus Compounds XI: The Reaction of Phosphorus Reagents With Hydrazonoyl Halides,Hydrazonoyl Azides,and Shiff's Bases

N-(chloro-furan-2-yl)methylene-N′-(4-nitrophenyl)hydrazone (I) reacted with triethylphosphite to produce the phosphonate derivative III. The tetrazine derivative VI was produced by the interaction of I with diethyl-phosphite. Hydrazonoyl azide derivatives VIIIa–c reacted with triphenyl phosphine to form the iminophosphorane derivatives Xa–c. On the other hand, the azide derivative VIIIc reacted with the phosphonium ylide XI to form the 1,2,3-triazole adduct XIII. The reaction of triethyl phosphite with Shiff's bases XIVa–c yielded the corresponding phosphonates XVa–c. The structures of the newly prepared compounds were confirmed with the analytical and spectroscopic evidences.     

Calorimetric, conductometric and density measurements of iteratively filtered water using 450, 200, 100 and 25 nm Millipore filters

This study presents some experimental results on the variation of the physico-chemical properties of pure MilliQ water, when subjected to a procedure of iterated filtration through Millipore filters with porosity ranging from 450 to 25 nm. The parameters measured were: calorimetry, electrical conductivity, density, and pH. Release of chemical impurities can be ruled out due to the nature of the materials used. As in the case of iteratively filtered water prepared using Pyrex glass filters, the specific electrical conductivity and the pH were found to increase with increasing number of iterations. There was also a dependence on the average pore size of the filters. The idea of water as a system capable of self-organization triggered by various perturbations (mechanical and/or electromagnetic) is gaining momentum. It responds to such perturbations by forming dissipative structures, i.e., far-from-equilibrium systems.     

An Improved Measurement of Isotopic Ratios by High Resolution Mass Spectrometry

The study of protein kinetics requires an accurate measurement of isotopic ratios of peptides. Although Fourier transform-ion cyclotron resonance (FT-ICR) mass spectrometers yield accurate mass measurements of analytes, the isotopologue ratios are consistently lower than predicted. Recently, we demonstrated that the magnitude of the spectral error in the FT-ICR mass spectrometer is proportional to the scan duration of ions. Here, we present a novel isotopic ratio extrapolation (IRE) method for obtaining accurate isotopic ratio measurements. Accuracy is achieved by performing scans with different duration and extrapolation of the data to the initial moment of the ion rotation; IRE minimizes the absolute isotopic ratio error to ≤1 %. We demonstrate the application of IRE in protein turnover studies using ²H₂O-metabolic labeling. Overall, this technique allows accurate measurements of the isotopic ratios of proteolytic peptides, a critical step for enabling routine studies of proteome dynamics.      

2-Keto-3-mercaptocinchoninic Acids as Precursors for Novel Thiazino[6,5-c]quinoline-1,5-dione Derivatives

2-Keto-3-mercaptocinchoninic acid derivatives 1a and b react with Schiff's bases 2a–d in toluene at refluxing temperature to give thiazino[6,5-c]quinoline derivatives 4a–h. Also, refluxing of 1a and b with arylazomalononitriles 5a–d in acetic acid afforded the thiazolo[6,5-c]quinoline derivatives 7a–d. The structure of all the newly synthesized products was confirmed based on elemental and spectral data.     

Photodynamic Tumor Eradication With a Novel Targetable Photosensitizer: Strong Vascular Effects and Dependence on Treatment Repetition Versus Potentiation

A novel pyropheophorbide‐a (PPa) derivative, Ac‐sPPp, was developed in our lab for targeted photodynamic therapy (PDT) and combination therapies. Its versatile peptide moiety, high water‐solubility, amphiphilicity, and micellar aggregation allow efficient coupling to targeting moieties and convenient mixing with other therapeutics. Photosensitizer immunoconjugate (PIC) targeted PDT, using Ac‐sPPp conjugated to therapeutic anti‐epidermal growth factor receptor (EGFR) antibody cetuximab, and PDT + chemotherapy combination treatment, using Ac‐sPPp mixed with stealth liposomal doxorubicin (Doxil), were investigated as promising strategies for potentiating PDT and improving target specificity. Passively targeted PDT with Ac‐sPPp only or surfactant‐solubilized PPa was also investigated for comparison. The A‐431 human vulvar squamous cell carcinoma, xenografted in nude mice, was chosen as a tumor model because of its high EGFR expression and sensitivity to liposomal doxorubicin in vitro. Fluorescence imaging and PDT experiments showed that Ac‐sPPp formulations circulated far longer and provided superior tumor contrast and superior tumor control compared to PPa. Strong PDT vascular effects were observed by laser Doppler imaging regardless of whether Ac‐sPPp was passively or actively targeted. Passively targeted Ac‐sPPp PDT gave equivalent or better tumor control than PIC‐targeted PDT or PDT + Doxil combination therapy, and when treatments were repeated, it also yielded the highest cure rate.     

Synthesis of Acylated Steroidal Olefins and Their Derivatives

Acylation of cholest-5-ene and cholest-5-ene 3-one with anhydrides in the presence of zinc chloride and characterization of products thus obtained on the basis of elemental analysis, spectral data, and chemical transformations are reported.     

Evaluation of the cyclotron production of 165Er by different reactions

Erbium-165 with 10.3 h physical half-life decays completely by electron capture to the ground state of stable isotope ¹⁶⁵Ho and it is an ideal radio lanthanide for Auger electron therapy. Excitation function of ¹⁶⁵Er via ^natEr(p,x)¹⁶⁵Tm → ¹⁶⁵Er, ¹⁶⁶Er(p,2n)¹⁶⁵Tm → ¹⁶⁵Er, ¹⁶⁵Ho(p,n)¹⁶⁵Er and ¹⁶⁵Ho(d,2n)¹⁶⁵Er reactions were calculated using ALICE/ASH (Hybrid and GDH models) and EMPIRE 3.1 codes and then were compared with the reported measurement by experimental data and TENDL-2011. Physical yield and target thickness were evaluated with attention to excitation function, stopping power and SRIM code. ¹⁶⁵Er was produced using the sedimentation technique through the ^natEr (p,x)¹⁶⁵Tm → ¹⁶⁵Er reaction. The deposited target was irradiated with 15 MeV proton beams at 20 μA current for 1 h. The ¹⁶⁵Tm production yield was 26 MBq/μA h at the end of bombardment.     

Synthesis,Characterization, and Antimicrobial Activity of Carboxymethyl Chitosan-Graft-Poly(N-acryloyl,N′-cyanoacetohydrazide) Copolymers

Carboxymethyl chitosan was grafted with N-acryloyl,N′-cyanoacetohydrazide in homogenous aqueous phase using potassium persulfate initiator. The maximum grafting yield achieved was 448% at 0.03 mol/L potassium persulfate, 0.75 mol/L N-acryloyl,N′-cyanoacetohydrazide, and 60°C within 2 h. The grafted copolymers showed better thermal stability than that of carboxymethyl chitosan. The samples with percent grafting values up to 98% were soluble in water, but a higher grafting extent resulted in insoluble copolymers. The grafted copolymers are nontoxic materials and showed an inhibition effect on both Escherichia coli and Staphylococcus aureus bacteria and Aspergillus flavus and Candida albicans fungi better than those of chitosan and carboxymethyl chitosan themselves.     

A Versatile Long‐Wavelength‐Absorbing Scaffold for Eu‐Based Responsive Probes

Coumarin‐sensitized, long‐wavelength‐absorbing luminescent Eu^III‐complexes have been synthesized and characterized. The lanthanide binding site consists of a cyclen‐based chelating framework that is attached through a short linker to a 7‐hydroxycoumarin, a 7‐B(OH)₂‐coumarin, a 7‐O‐(4‐pinacolatoboronbenzyl)‐coumarin or a 7‐O‐(4‐methoxybenzyl)‐coumarin. The syntheses are straightforward, use readily available building blocks, and proceed through a small number of high‐yielding steps. The sensitivity of coumarin photophysics to the 7‐substituent enables modulation of the antenna‐absorption properties, and thus the lanthanide excitation spectrum. Reactions of the boronate‐based functionalities (cages) with H₂O₂ yielded the corresponding 7‐hydroxycoumarin species. The same species was produced with peroxynitrite in a ×10⁶–10⁷‐fold faster reaction. Both reactions resulted in the emergence of a strong ≈407 nm excitation band, with concomitant decrease of the 366 nm band of the caged probe. In aqueous solution the methoxybenzyl caged Eu‐complex was quenched by ONOO^?. We have shown that preliminary screening of simple coumarin‐based antennae through UV/Vis absorption spectroscopy is possible as the changes in absorption profile translate with good fidelity to changes in Eu^III‐excitation profile in the fully elaborated complex. Taken together, our results show that the 7‐hydroxycoumarin antenna is a viable scaffold for the construction of turn‐on and ratiometric luminescent probes.     

Arene C?H Amination at Nickel in Terphenyl–Diphosphine Complexes with Labile Metal–Arene Interactions

The meta‐terphenyl diphosphine, m‐P₂, 1 , was utilized to support Ni centers in the oxidation states 0, I, and II. A series of complexes bearing different substituents or ligands at Ni was prepared to investigate the dependence of metal–arene interactions on oxidation state and substitution at the metal center. Complex (m‐P₂)Ni ( 2 ) shows strong Ni⁰–arene interactions involving the central arene ring of the terphenyl ligand both in solution and the solid state. These interactions are significantly less pronounced in Ni⁰ complexes bearing L‐type ligands ( 2‐L : L=CH₃CN, CO, Ph₂CN₂), Ni^IX complexes ( 3‐X : X=Cl, BF₄, N₃, N₃B(C₆F₅)₃), and [(m‐P₂)Ni^IICl₂] ( 4 ). Complex 2 reacts with substrates, such as diphenyldiazoalkane, sulfur ylides (Ph₂S?CH₂), organoazides (RN₃: R=para‐C₆H₄OMe, para‐C₆H₄CF₃, 1‐adamantyl), and N₂O with the locus of observed reactivity dependent on the nature of the substrate. These reactions led to isolation of an η¹‐diphenyldiazoalkane adduct ( 2‐Ph₂CN₂ ), methylidene insertion into a Ni? P bond followed by rearrangement of a nickel‐bound phosphorus ylide ( 5 ) to a benzylphosphine ( 6) , Staudinger oxidation of the phosphine arms, and metal‐mediated nitrene insertion into an arene C? H bond of 1 , all derived from the same compound ( 2 ). Hydrogen‐atom abstraction from a Ni^I–amide ( 9 ) and the resulting nitrene transfer supports the viability of Ni–imide intermediates in the reaction of 1 with 1‐azido‐arenes.