Development and Validation of HPLC,TLC and Derivative Spectrophotometric Methods for the Analysis of Ezetimibe in the Presence of Alkaline Induced Degradation Products

Reversed phase‐high performance liquid chromatography (RP‐HPLC), thin layer chromatography (TLC) densitometry and first derivative spectrophotometry (1D) techniques are developed and validated as a stability‐indicating assay of ezetimibe in the presence of alkaline induced degradation products. RP‐HPLC method involves an isocratic elution on a Phenomenex Luna 5μ C₁₈ column using acetonitrile: water: glacial acetic acid (50:50:0.1 v/v/v) as a mobile phase at a flow rate of 1.5 mL/min. and a UV detector at 235 nm. TLC densitometric method is based on the difference in Rf‐values between the intact drug and its degradation products on aluminum‐packed silica gel 60 F₂₅₄ TLC plates as stationary phase with isopropanol: ammonia 33% (9:1 v/v) as a developing mobile phase. On the fluorescent plates, the spots were located by fluorescence quenching and the densitometric analysis was carried out at 250 nm. Derivative spectrophotometry, the zero‐crossing method, ezetimibe was determined using first derivative at 261 nm in the presence of its degradation products. Calibration graphs of the three suggested methods are linear in the concentration ranges 1–10 mcg/mL, 0.1–1 mg/mL and 1–16 mcg/mL with a mean percentage accuracy of 99.05 ± 0.54%, 99.46 ± 0.63% and 99.24 ± 0.82% of bulk powder, respectively. The three proposed methods were successfully applied for the determination of ezetimibe in raw material and pharmaceutical dosage form; the results were statistically analyzed and compared with those obtained by the reported method. Validation parameters were determined for linearity, accuracy and precision; selectivity and robustness and were assessed by applying the standard addition technique.     

Delapril and manidipine measurements by liquid chromatography-tandem mass spectrometry in a pharmaceutical formulation

A simple, specific, fast and sensitive liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the simultaneous analysis of delapril (DEL) and manidipine (MAN) from their combination formulation was developed and validated using fesoterodine as the internal standard (IS). The LC-MS/MS method was carried out on a Luna C8 column (50 × 3.0 mm i.d., 3 μm) with a mobile phase consisting of methanol and 10 mmol L(-1) ammonium acetate (90 : 0, v/v), run at a flow rate of 0.25 mL min(-1). The mass spectrometry method was performed employing positive electrospray ionization operating in multiple reaction monitoring mode, monitoring the transitions of m/z 453.1 → 234.1 for DEL, m/z 611.1 → 167.0 for MAN and m/z 412.2 → 223.0 for IS. The total analysis time was 3 min and the method was linear in the concentration range of 6-1080 ng mL(-1) and 2-360 ng mL(-1) for DEL and MAN, respectively. Parameters investigated for the method validation, such as the specificity, linearity, precision, accuracy and robustness, gave results within the acceptable range. Moreover, the proposed method was successfully applied for the simultaneous determination of DEL and MAN and the results were compared to validated liquid chromatography and capillary electrophoresis methods showing non-significant differences (P = 0.9).     

Pyridazine based scorpionate ligand in a copper boratrane compound

Reaction of potassium tris(mercapto-tert-butylpyridazinyl)borate K[Tn(tBu)] with copper(II) chloride in dichloromethane at room temperature led to the diamagnetic copper boratrane compound [Cu{B(Pn(tBu))(3)}Cl] (Pn = pyridazine-3-thionyl) (1) under activation of the B-H bond and formation of a Cu-B dative bond. In contrast to this, stirring of the same ligand with copper(I) chloride in tetrahydrofuran (THF) gave the dimeric compound [Cu{Tn(tBu)}](2) (2) where one copper atom is coordinated by two sulfur atoms and one hydrogen atom of one ligand and one sulfur of the other ligand. Hereby, no activation of the B-H bond occurred but a 3-center-2-electron B-H···Cu bond is formed. The reaction of copper(II) chloride with K[Tn(tBu)] in water gave the same product 2, but a formal reduction of the metal center from Cu(II) to Cu(I) occurred. When adding tricyclohexyl phosphine to the reaction mixture of K[Tn(R)] (R = tBu, Me) and copper(I) chloride in MeOH, the distorted tetrahedral Cu complexes [Cu{Tn(R)}(PCy(3))] (R = tBu 3, Me 4) were formed. Compound 4 is exhibiting an "inverted" κ(3)-H,S,S, coordination mode. The copper boratrane 1 was further investigated by density functional theory (DFT) calculations for a better understanding of the M→B interaction involving the d(8) electron configuration of Cu.     

Control of the morphology of linear and cyclic PS-b-PI block copolymer micelles via PS addition

We have studied the effect of polystyrene (PS) homopolymer addition on the morphology of self-assembled block copolymer micelles made from linear or cyclic poly(styrene-b-isoprene), PS-b-PI, in a selective solvent for the PI block (heptane). Both copolymers have the same composition: the degree of polymerization is 290 for the PS block, and 110 for the PI block, and we focused on the influence of the addition of small amounts of PS homopolymer on the micellar morphology. For the copolymer concentrations considered, the linear copolymer self-organizes into spherical micelles while the cyclic copolymer forms cylindrical micelles. PS and PI chains constitute the core and the corona of these micelles, respectively, due to the different affinity of the blocks for heptane. Consequently, the PS homopolymer added is "solubilized" into the micellar core. Dynamic light scattering (DLS) data combined with atomic force microscopy (AFM) results show that the addition of PS homopolymer induces a drastic change in the micellar organization. Indeed, a morphological transition, from spheres to cylinders for the linear copolymer, and from cylinders to vesicles for the cyclic copolymer, is observed. These results highlight the fact that a small incorporation of PS homopolymer is clearly sufficient to modify the morphology (size and shape) of the micelles. This approach could be a key parameter for the design/control of micelles for specific applications in nanotechnology.     

Activation and Photoinduced Release of Alkynes on a Biomimetic Tungsten Center: The Photochemical Behavior of the W−S-Phoz System

The synthesis and structural determination of four tungsten alkyne complexes coordinated by the bio-inspired S,N-donor ligand 2-(4′,4′-dimethyloxazoline-2′-yl)thiophenolate (S-Phoz) is presented. A previously established protocol that involved the reaction of the respective alkyne with the bis-carbonyl precursor [W(CO)₂(S-Phoz)₂] was used for the complexes [W(CO)(C₂R₂)(S-Phoz)₂] (R=H, 1 a ; Me, 1 b ; Ph, 1 c ). Oxidation with pyridine-N-oxide gave the corresponding W-oxo species [WO(C₂R₂)(S-Phoz)₂] (R=H, 2 a ; Me, 2 b ; Ph, 2 c ). All W-oxo-alkyne complexes ( 2 a , b , c ) were found to be capable of alkyne release upon light irradiation to afford five-coordinate [WO(S-Phoz)₂] ( 3 ). The photoinduced release of the alkyne ligand was studied in detail by in situ ¹H NMR measurements, which revealed correlation of the photodissociation rate constant ( 2 b>2 a>2 c ) with the elongation of the alkyne C≡C bond in the molecular structures. Oxidation of [WO(S-Phoz)₂] ( 3 ) with pyridine-N-oxide yielded [WO₂(S-Phoz)₂] ( 4 ), which shows highly fluxional behavior in solution. Variable-temperature ¹H NMR spectroscopy revealed three isomeric forms with respect to the ligand arrangement versus each other. Furthermore, compound 4 rearranges to tetranuclear oxo compound [W₄O₄(μ-O)₆(S-Phoz)₄] ( 5 ) and dinuclear [{WO(μ-O)(S-Phoz)}₂] ( 6 ) over time. The latter two were identified by single-crystal X-ray diffraction analyses.     

Design,Synthesis, Molecular Modeling Study,and Antimicrobial Activity of Some Novel Pyrano[2,3‐b]pyridine and Pyrrolo[2,3‐b]pyrano[2.3‐d]pyridine Derivatives

Novel derivatives of pyrano[2,3‐b]pyridine and pyrrolo[2,3‐b]pyrano[2.3‐d]pyridine were prepared, and their structures were elucidated by spectral and elemental analyses. The newly prepared candidates were evaluated for their antimicrobial activity against Candida sp., Aspergillus multi, Aspergillus niger, Escherichia coli, and Staphylococcus aureus. All the tested compounds revealed potent to moderate activity toward all tested microorganisms; especially, candidate 10 showed comparable antifungal activity as that showed by the standard drug ketoconazole toward Candida sp., and ethyl 4‐methyl‐1,7,8,9‐tetrahydropyrano[2,3‐b]pyrrolo[2,3‐d]pyridine‐3‐carboxylate ( 12 ) was the most active compound against all the tested bacteria. Furthermore, the newly synthesized compounds are subjected to molecular docking study for the inhibition of the enzyme L‐glutamine: D‐fructose‐6‐phosphate amidotransferase [GlcN‐6‐P], which is a new target for antimicrobials to explain action mode of these target compounds as leads for discovering other antimicrobial agents.     

Electrochemical Sensor Based on Thioether Oligomer Poly(N‐vinylpyrrolidone)‐modified Gold Electrode for Bisphenol A Detection

Presently, bisphenol A (BPA) has been added to the list of substances of very high concern as endocrine disruptors. According to the literature, exposure to bisphenol A even at low doses may result in adverse health effects. In this study, electrochemical sensor of Bisphenol A based on thioether DDT‐Poly(N‐vinylpyrrolidone) oligomer has been developed. The thioether oligomer, which is capable of recognizing BPA, was prepared and used for gold electrode modification. The characterization of the modified gold electrode and the synthesized thioether oligomer were carried out by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM), Fourier‐transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR) and Size exclusion chromatography (SEC). Obtained results indicate that the modified electrode shows good electrochemical activity, good sensitivity and reproducibility for BPA detection. It exhibited a good linear relationship ranging from 1 to 20 pg/mL, and the detection limit was found to be 1.9 pg/mL at S/N=3. Several interfering species such as hydroquinone, phenol and resorcinol were used and their behaviors on the modified gold electrode were investigated.     

Mechanistic insight into the reactivity of oxotransferases by novel asymmetric dioxomolybdenum(VI) model complexes

The asymmetric molybdenum(VI) dioxo complexes of the bis(phenolate) ligands 1,4‐bis(2‐hydroxybenzyl)‐1,4‐diazepane, 1,4‐bis(2‐hydroxy‐4‐methylbenzyl)‐1,4‐diazepane, 1,4‐bis(2‐hydroxy‐3,5‐dimethylbenzyl)‐1,4‐diazepane, 1,4‐bis(2‐hydroxy‐3,5‐di‐tert‐butylbenzyl)‐1,4‐diazepane, 1,4‐bis(2‐hydroxy‐4‐flurobenzyl)‐1,4‐diazepane, and 1,4‐bis(2‐hydroxy‐4‐chlorobenzyl)‐1,4‐diazepane (H₂(L1)–H₂(L6), respectively) have been isolated and studied as functional models for molybdenum oxotransferase enzymes. These complexes have been characterized as asymmetric complexes of type [MoO₂(L)] 1–6 by using NMR spectroscopy, mass spectrometry, elemental analysis, and electrochemical methods. The molecular structures of [MoO₂(L)] 1–4 have been successfully determined by single‐crystal X‐ray diffraction analyses, which show them to exhibit a distorted octahedral coordination geometry around molybdenum(VI) in an asymmetrical cis‐β configuration. The Mo? O_oxo bond lengths differ only by ≈0.01 Å. Complexes 1 , 2 , 5 , and 6 exhibit two successive Mo^VI/Mo^V (E_1/2, ?1.141 to ?1.848 V) and Mo^V/Mo^IV (E_1/2, ?1.531 to ?2.114 V) redox processes. However, only the Mo^VI/Mo^V redox couple was observed for 3 and 4 , suggesting that the subsequent reduction of the molybdenum(V) species is difficult. Complexes 1 , 2 , 5 , and 6 elicit efficient catalytic oxygen‐atom transfer (OAT) from dimethylsulfoxide (DMSO) to PMe₃ at 65 °C at a significantly faster rate than the symmetric molybdenum(VI) complexes of the analogous linear bis(phenolate) ligands known so far to exhibit OAT reactions at a higher temperature (130 °C). However, complexes 3 and 4 fail to perform the OAT reaction from DMSO to PMe₃ at 65 °C. DFT/B3LYP calculations on the OAT mechanism reveal a strong trans effect.     

Structural studies on Ba(II) adducts of the cytosine nucleobase and its derivative 1-Methylcytosine*

Abstract

The use of the cytosine nucleobase or its 1-Methylcytosine derivative as ligands toward barium(II) cations led to the formation of three compounds, {[Ba(1-Mecyt)(H₂O)X₂]}_n [X=Cl (1), Br (2)], and {[Ba(cyt)₂(H₂O)(ClO₄)₂]}_n (3). Depending on the ligand and the counterion employed, 1–3 exhibit different architectures, which serve as a playground to study how the methyl substitution, together with the nature of the counterion are both significant in the self-assembling process of such species. The effect of the nature and size of the alkaline-earth metal ion on the final structural motif is also evident when comparing these structures with parent complexes of the Ca(II) ion.     

Photodynamic Tumor Eradication With a Novel Targetable Photosensitizer: Strong Vascular Effects and Dependence on Treatment Repetition Versus Potentiation

A novel pyropheophorbide‐a (PPa) derivative, Ac‐sPPp, was developed in our lab for targeted photodynamic therapy (PDT) and combination therapies. Its versatile peptide moiety, high water‐solubility, amphiphilicity, and micellar aggregation allow efficient coupling to targeting moieties and convenient mixing with other therapeutics. Photosensitizer immunoconjugate (PIC) targeted PDT, using Ac‐sPPp conjugated to therapeutic anti‐epidermal growth factor receptor (EGFR) antibody cetuximab, and PDT + chemotherapy combination treatment, using Ac‐sPPp mixed with stealth liposomal doxorubicin (Doxil), were investigated as promising strategies for potentiating PDT and improving target specificity. Passively targeted PDT with Ac‐sPPp only or surfactant‐solubilized PPa was also investigated for comparison. The A‐431 human vulvar squamous cell carcinoma, xenografted in nude mice, was chosen as a tumor model because of its high EGFR expression and sensitivity to liposomal doxorubicin in vitro. Fluorescence imaging and PDT experiments showed that Ac‐sPPp formulations circulated far longer and provided superior tumor contrast and superior tumor control compared to PPa. Strong PDT vascular effects were observed by laser Doppler imaging regardless of whether Ac‐sPPp was passively or actively targeted. Passively targeted Ac‐sPPp PDT gave equivalent or better tumor control than PIC‐targeted PDT or PDT + Doxil combination therapy, and when treatments were repeated, it also yielded the highest cure rate.