Exploring Charged Polymeric Cyclodextrins for Biomedical Applications

Over the years, cyclodextrin uses have been widely reviewed and their proprieties provide a very attractive approach in different biomedical applications. Cyclodextrins, due to their characteristics, are used to transport drugs and have also been studied as molecular chaperones with potential application in protein misfolding diseases. In this study, we designed cyclodextrin polymers containing different contents of β- or γ-cyclodextrin, and a different number of guanidinium positive charges. This allowed exploration of the influence of the charge in delivering a drug and the effect in the protein anti-aggregant ability. The polymers inhibit Amiloid β peptide aggregation; such an ability is modulated by both the type of CyD cavity and the number of charges. We also explored the effect of the new polymers as drug carriers. We tested the Doxorubicin toxicity in different cell lines, A2780, A549, MDA-MB-231 in the presence of the polymers. Data show that the polymers based on γ-cyclodextrin modified the cytotoxicity of doxorubicin in the A2780 cell line.     

Unraveling the dynamics of the C(3P,1D) + C2H2 reactions by the crossed molecular beam scattering technique

A detailed investigation of the dynamics of the reactions of ground- and excited-state carbon atoms, C(3P) and C(1D), with acetylene is reported over a wide collision energy range (3.6-49.1 kJ mol-1) using the crossed molecular beam (CMB) scattering technique with electron ionization mass spectrometric detection and time-of-flight (TOF) analysis. We have exploited the capability of (a) generating continuous intense supersonic beams of C(3P, 1D), (b) crossing the two reactant beams at different intersection angles (45, 90, and 135 degrees ) to attain a wide range of collision energies, and (c) tuning the energy of the ionizing electrons to low values (soft ionization) to suppress interferences from dissociative ionization processes. From angular and TOF distribution measurements of products at m/z=37 and 36, the primary reaction products of the C(3P) and C(1D) reactions with C2H2 have been identified to be cyclic (c)-C3H + H, linear (l)-C3H + H, and C3 + H2. From the data analysis, product angular and translational energy distributions in the center-of-mass (CM) system for both the linear and cyclic C3H isomers as well as the C3 product from C(3P) and for l/c-C3H and C3 from C(1D) have been derived as a function of collision energy from 3.6 to 49.1 kJ mol-1. The cyclic/linear C3H ratio and the C3/(C3 + c/l-C3H) branching ratios for the C(3P) reaction have been determined as a function of collision energy. The present findings have been compared with those from previous CMB studies using pulsed beams; here, a marked contrast is noted in the CM angular distributions for both C3H- and C3-forming channels from C(3P) and their trend with collision energy. Consequently, the interpretation of the reaction dynamics derived in the present work contradicts that previously proposed from the pulsed CMB studies. The results have been discussed in the light of the available theoretical information on the relevant triplet and singlet C3H2 ab initio potential energy surfaces (PESs). In particular, the branching ratios for the C(3P) + C2H2 reaction have been compared with the available theoretical predictions (approximate quantum scattering calculations and quasiclassical trajectory calculations on ab initio triplet PESs and, very recent, statistical calculations on ab initio triplet PESs as well as on ab initio triplet/singlet PESs including nonadiabatic effects, that is, intersystem crossing). While the experimental branching ratios have been corroborated by the statistical predictions, strong disagreement has been found with the results of the dynamical calculations. The astrophysical implications of the present results have been noted.     

Effects of Spiro-Cyclohexane Substitution of Nitroxyl Biradicals on Dynamic Nuclear Polarization

Spiro-substituted nitroxyl biradicals are widely used as reagents for dynamic nuclear polarization (DNP), which is especially important for biopolymer research. The main criterion for their applicability as polarizing agents is the value of the spin–spin exchange interaction parameter (J), which can vary considerably when different couplers are employed that link the radical moieties. This paper describes a study on biradicals, with a ferrocene-1,1′-diyl-substituted 1,3-diazetidine-2,4-diimine coupler, that have never been used before as DNP agents. We observed a substantial difference in the temperature dependence between Electron Paramagnetic Resonance (EPR) spectra of biradicals carrying either methyl or spirocyclohexane substituents and explain the difference using Density Functional Theory (DFT) calculation results. It was shown that the replacement of methyl groups by spirocycles near the N-O group leads to an increase in the contribution of conformers having J ≈ 0. The DNP gain observed for the biradicals with methyl substituents is three times higher than that for the spiro-substituted nitroxyl biradicals and is inversely proportional to the contribution of biradicals manifesting the negligible exchange interaction. The effects of nucleophiles and substituents in the nitroxide biradicals on the ring-opening reaction of 1,3-diazetidine and the influence of the ring opening on the exchange interaction were also investigated. It was found that in contrast to the methyl-substituted nitroxide biradical (where we observed the ring-opening reaction upon the addition of amines), the ring opening does not occur in the spiro-substituted biradical owing to a steric barrier created by the bulky cyclohexyl substituents.     

Water-Assisted Concerted Proton-Electron Transfer at Co(II)-Aquo Sites in Polyoxotungstates With Photogenerated RuIII(bpy)33+ Oxidant

The cobalt substituted polyoxotungstate [Co₆(H₂O)₂(α-B-PW₉O₃₄)₂(PW₆O₂₆)]¹⁷⁻ ( Co6 ) displays fast electron transfer (ET) kinetics to photogenerated Ru^III(bpy)₃³⁺, 4 to 5 orders of magnitude faster than the corresponding ET observed for cobalt oxide nanoparticles. Mechanistic evidence has been acquired indicating that: (i) the one-electron oxidation of Co6 involves Co(II) aquo or Co(II) hydroxo groups (abbreviated as Co6(II) −OH ₂ and Co6(II) −OH, respectively, whose speciation in aqueous solution is associated to a pK_a of 7.6), and generates a Co(III)−OH moiety ( Co6(III) −OH), as proven by transient absorption spectroscopy; (ii) at pH>pK_a, the Co6(II) −OH→Ru^III(bpy)₃³⁺ ET occurs via bimolecular kinetics, with a rate constant k close to the diffusion limit and dependent on the ionic strength of the medium, consistent with reaction between charged species; (iii) at pH <pK_a, the process involves Co6(II) − OH₂ → Co6(III)−OH transformation and proceeds via a multiple-site, concerted proton electron transfer (CPET) where water assists the transfer of the proton, as proven by the absence of effect of buffer base concentrations on the rate of the ET and by a H/D kinetic isotope in a range of 1.2–1.4. The reactivity of water is ascribed to its organization on the surface of the polyanionic scaffold through hydrogen bond networking involving the Co(II)−OH₂ group.     

Nuclear model calculation for cyclotron production of 61Cu as a PET imaging

⁶¹Cu is positron emitter and can be used as the PET and molecular imaging. In this study cyclotron production of ⁶¹Cu via ⁶¹Ni(p,n)⁶¹Cu, ^natNi(p,x)⁶¹Cu, ^natNi(d,x)⁶¹Cu, ^natNi(α,x)⁶¹Cu, ^natZn(p,x)⁶¹Cu and ⁵⁹Co(α,2n)⁶¹Cu reactions was investigated. The ALICE/ASH (hybrid and GDH models) and TALYS-1.2 codes were used to calculate excitation functions for proton, alpha and deuteron induced on ^natNi, proton on ⁶¹Ni and ^natZn and also alpha-particle on ⁵⁹Co targets that lead to the production of ⁶¹Cu radioisotopes using intermediate energy accelerators. In addition, we compared the data obtained from in this study with the reported measurement by experimental data. Moreover, optimal thickness of the targets and physical yield were obtained by stopping and range of ions in matter code for each reaction. Eventually ⁶¹Ni(p,n)⁶¹Cu and ⁵⁹Co(α,2n)⁶¹Cu reaction to produce ⁶¹Cu in no-carrier added state with high production yield was suggested. Finally the ^natNi(p,x)⁶¹Cu reaction was employed to test the target preparation using electroplating technique.     

A Versatile Long‐Wavelength‐Absorbing Scaffold for Eu‐Based Responsive Probes

Coumarin‐sensitized, long‐wavelength‐absorbing luminescent Eu^III‐complexes have been synthesized and characterized. The lanthanide binding site consists of a cyclen‐based chelating framework that is attached through a short linker to a 7‐hydroxycoumarin, a 7‐B(OH)₂‐coumarin, a 7‐O‐(4‐pinacolatoboronbenzyl)‐coumarin or a 7‐O‐(4‐methoxybenzyl)‐coumarin. The syntheses are straightforward, use readily available building blocks, and proceed through a small number of high‐yielding steps. The sensitivity of coumarin photophysics to the 7‐substituent enables modulation of the antenna‐absorption properties, and thus the lanthanide excitation spectrum. Reactions of the boronate‐based functionalities (cages) with H₂O₂ yielded the corresponding 7‐hydroxycoumarin species. The same species was produced with peroxynitrite in a ×10⁶–10⁷‐fold faster reaction. Both reactions resulted in the emergence of a strong ≈407 nm excitation band, with concomitant decrease of the 366 nm band of the caged probe. In aqueous solution the methoxybenzyl caged Eu‐complex was quenched by ONOO^?. We have shown that preliminary screening of simple coumarin‐based antennae through UV/Vis absorption spectroscopy is possible as the changes in absorption profile translate with good fidelity to changes in Eu^III‐excitation profile in the fully elaborated complex. Taken together, our results show that the 7‐hydroxycoumarin antenna is a viable scaffold for the construction of turn‐on and ratiometric luminescent probes.     

Preparation and characterization of dense films of poly(amidoamine) dendrimers on indium tin oxide

Indium tin oxide (ITO) substrates were modified with a layer of poly(amidoamine) (PAMAM) dendrimers to change their surface properties and, in particular, the substrates' work function. The functionalization procedure involved the electrostatic adsorption of positively charged PAMAM dendrimers of generation five onto negatively polarized ITO surfaces. Three different PAMAM dendrimers were used: PAMAM-NH2 and PAMAM-OH with terminal amine and hydroxyl groups, respectively, as well as Q-PAMAM-NH2, which had been prepared from PAMAM-NH2 by quaternization of the dendrimer's terminal and internal amine groups with methyl iodide. The resulting organic films were analyzed by contact angle goniometry, X-ray photoelectron spectroscopy, ellipsometry, and Kelvin probe force microscopy to confirm the presence of a dense layer. A Langmuir isotherm was derived from surface densities of fluorescence-labeled PAMAM-NH2 dendrimers from which we deduced an equilibrium binding constant, K(eq), of (1.3 +/- 0.3) x 10(5) M(-1). Kelvin probe measurements of the contact potential difference revealed a high reduction of the work function from 4.9 eV for bare ITO to 4.3 eV for ITO with a dense film of PAMAM-NH2 of generation five. PAMAM-OH and Q-PAMAM-NH2 resulted in slightly smaller work function changes. This study illustrates that the work function of ITO can be tuned by adlayers composed of PAMAM dendrimers.     

Tailoring of carboxyl‐decorated magnetic latex particles using seeded emulsion polymerization

In this research, submicron and carboxyl‐functionalized magnetic latex particles were elaborated by using seeded emulsion polymerization technique in presence of oil‐in‐water (o/w) magnetic emulsion as seed. The polymerization conditions were optimized in order to get well‐defined latex particles with magnetic core and polymer shell bearing carboxylic (–COOH) functionality. Starting from (o/w) magnetic emulsion as seed, synthesis process was performed by copolymerization of styrene (St) monomer with the cross‐linker divinylbenzene (DVB) in presence of 4,4′‐azobis(4‐cyanopentanoic acid) (ACPA) as a carboxyl‐bearing initiator. The prepared magnetic latex particles were first characterized in terms of particle size, chemical composition, morphology, magnetic properties, magnetic content, and colloidal stability using various techniques, e.g. particle size analyzer using dynamic light scattering (DLS) technique, Fourier transform infrared, transmission electron microscopy, vibrating sample magnetometer, thermogravimetric analysis, and zeta potential measurements as a function of pH of the dispersion media, respectively. The prepared magnetic latex particles were then used as second seed for further functionalization with methacrylic acid (MAA) in order to enhance carboxylic groups on the magnetic particle's surface. The results showed that final magnetic latex particles possessed spherical morphology with core‐shell structure and enriched carboxylic acid functionality. More importantly, they exhibited superparamagnetism with high magnetic content (58.42 wt%) and high colloidal stability, which considered as the main requirements for their application in the biomedical diagnostic domains. Copyright © 2017 John Wiley & Sons, Ltd.     

Modeling Media with Oriented Structures

Heterogeneity is typically the result of space variability of soil parameters at different scales. Soil anisotropy may be defined as the spatial persistence in some direction only, across coarse-grid elements, of heterogeneous structures with different characteristic lengths in different directions. One can account for the effect of these structures by upscaling soil properties. Analyzing flow in a strongly anisotropic structured soil at different scales evidences how transverse dispersion reduces to a subscale process, leading to mixing within the conductive structures.