A more convenient and general procedure for O-monobenzylation of diols via stannylenes: a critical reevaluation of the Bu2SnO method

A more consistent, straightforward, and economical protocol for generation of stannylene species and their reaction with BnBr leading to products of O-monobenzylation of diols has been set. It has shown to be specially indicated for substrates bearing vicinal trans 1,2-diol moieties on cyclohexane backbones, which are more resistant to these transformations. Such protocol has been successfully applied to myo-inositol derivatives and acyclic diols.     

Some new ring-D seco steroids

The Beckmann fragmentation product, 3-methoxy-17-oxo-16,17-secoestra-1,3,5(10)-trien-16-nitrile (2) has been reduced by LAH giving the expected 3-methoxy-17-hydroxy-16,17-secoestra-1,3,5(10-trien-16-amine hydrochloride (3) and 3-methoxy-17-oxa-D-homoestra-1,3,5(10)-trien-16-ol (4), by a presumed neighbouring group participation of 17-OH group in the intermediary formed 16-imino derivative (A). The structure of 4 has been proved by an alternative synthetic route by reducing 3-methoxy-17-oxa-D-homoestra-1,3,5(10)-trien-16-one (7) with di-iso-butylaluminium hydride.     

Preconcentration of cadmium by MEUF in sodium dodecylsulphate solutions

The ultrafiltration preconcentration of Cd²⁺ using micellar extraction with 8-hydroxyquinoline (8-HQ), solubilized in anionic micelles of sodium dodecylsulphate (SDS)) were studied. The n-butanol was used as a co-surfactant. Ultrafiltration yields (R, %) on cellulose acetate membranes (wet, 20000 MW-CO) under 400 kPa pressure were determined. Distribution ratios (D) of cadmium between bulk liquid phase and micellar pseudophase were estimated. The constants (app.) for the cadmium-sodium exchange on SDS micelles surface at pH values of 4.8 and 5.3 (3.36 and 3.86, respectively) were determined. It was found, that the values of ultrafiltration yields of the cadmium (at constant concentration of 8-HQ) are influenced not only by the pH and by the concentration values, but also by the ratio of the concentrations of the metal and the anionic surfactant.     

A new production method for carrier-free201Tl using IEN'S cyclotron in Rio De Janeiro

A new and simplified method was developed for the separation of thallium 201 which will allow the shipment of a “one shot generator” to distant places and easy elution at the destination. Thallium is produced as usually, through the reaction $${}^{nat}Tl/p,xn/^{201} pb\xrightarrow{{\beta ^ + }}{}^{201}Tl$$ with 24-MeV protons from IEN'S CV-28 cyclotron. The separation is based on the properties of a chelating carboxylic acid cation exchange resin column which at pH 4.5 retains lead while thallim is easily eluted. This column can also be used as a regular generator to produced greater quantities of²⁰¹Tl but at the expense of more elutions.     

Micellar enhanced ultrafiltration of cadmium

The preconcentration of cadmium from aqueous colloid solution containing 8-hydroxyquinoline as extractant, laurylsulphate natrium as surfactant,n-butanol as co-surfactant was performed using micellar ultrafiltration technique. Filters with different pore size and materials were used to achieve a separation from liquid solutions. The cadmium recoveries depending on different conditions (pH, concentration of surfactant) were determined and the results are explained in the terms of colloidal parameters in the compare with the classical solvent extraction.     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

Kinetics of the manganese(III)-oxalate reaction in acidic sulphate media

The kinetics of the reaction of manganese(III) with oxalic acid (OA) has been studied in H₂SO₄ solutions. Under the experimental conditions of 6 × 10^–3 <>₀ < 0.4=" mol=">^–3 and [H₂SO₄]₀ 0.2 mol dm^–3 the observed pseudo-first order rate constant k _obs follows the expression

The relationship between the structures of Cu(II) complexes and their chemical transformations: VII

The thermal decompositions of Cu(en)₂(NCS)X. where X^–=Cl^–, Br^–, NO ₃ ^– , BF ₄ ^– and ClO ₄ ^– , have been studied in comparison with the courses of Cu(en)₂(SCN)₂ and Cu(en)₂X₂ decomposition. It is shown that the presence of the thiocyanate group in the complexes Cu(en)₂(NCS)X is the most important factor in the decomposition course, in agreement with the fact that the anions X^– are not coordinated. or are only semicoordinated. Significant differences were found in the courses of thermal decomposition of two forms of Cu(en)₂(NCS)(BF₄) differing in the structure of their coordination polyhedra.

---

Zusammenfassung Die thermische Zersetzung von Cu(en)₂(NCS)X (X=Cl Br, NO₃, BF₄ und ClO₄) wurde untersucht und mit der von Cu(en₂(SCN)₂ und Cu(en)₂X₂ verglichem. Der den Verlauf der Zersetzung entscheidend bestimmende Faktor isi die Anw esenheit der Thiocyanat-Gruppe in den Cu(en)₂(NCS)X-Komplexen, was in Übereinstimmung damit steht,. daß die Anionen X nicht oder nur teilweise koordiniert sind. Es wurden signifikante Unterschiedeim Verlauf der thermischen Zersetzung von zwei sich in der Struktur ihrer Kordinationspolyeder unter-, heidenden Formen von Cu(en)₂(NCS)(BF₄) gefunden.

---

Cu(en)₂(NCS)X (X^–=Cl^–, Br^–, NO ₄ ^– , NO ₃ ^– , BF₄ ClO₄, Cu(en)₂(SCN)₂ Cu(en)₂(X)₂. , Cu(en)₂(NCS)X X Cu(en) (NCS)BF₄ i .

     

预处理条件对Zn/Al-CLM的丙烷芳构化性能的影响

在脉冲微反装置上考察了不同的预处理条件对Zn/Al-CLM催化剂的丙烷芳构化反应的影响。结果表明，丙烷在Zn/Al-CLM催化剂上具有一定的的反应活性和芳烃选择性，而且芳构化主要转化为苯；载体Al-CLM的焙烧温度、金属锌负载量、活化温度等对Zn/Al-CLM催化剂的丙烷芳构化性能具有重要影响。载体经500℃预焙烧制备的Zn/Al-CLM催化剂具有最好的柱结构保留度，从而表现出最佳的芳构化性能；随着锌含量的增加，Zn/Al-CLM催化剂的酸量增大，从而使丙烷转化率增大，而选择性则是锌含量质量分数为5．8％时具有极大值；400℃活化处理可使Zn与Al-CLM之间具有适中的相互作用，从而使得Zn/Al-CLM具有较高的芳烃收率。     

Chemical synthesis and firefly luciferase produced dehydroluciferyl-coenzyme A

Dehydroluciferyl-coenzyme A (L-CoA) was chemically synthesized and characterized by MS, UV-vis spectrometry and RP-HPLC. The identity of the chemically synthesized compound with the one that was produced by firefly luciferase was confirmed. Moreover, the reversibility of the enzymatic conversion of dehydroluciferin ? dehydroluciferyl-adenylate ? L-CoA was also confirmed. The chemical synthesis of L-CoA, described here, may help the clarification of the activator effect of CoA on luciferase bioluminescent assays, in which the enzyme catalyzed formation of L-CoA and the consequent destruction of L-AMP is one of the possible explanations for that effect.