Reducing the cost, smell, and toxicity of the Barton reductive decarboxylation: chloroform as the hydrogen atom source

When used as solvent, chloroform was found to act as a hydrogen atom donor in Barton reductive decarboxylation reactions. Chloroform offers a substantial practical advantage over pre-existing hydrogen atom donors.     

Comparative analysis of CE‐SSCP to standard RFLP‐CE‐FLA method in quantification of known viral variants within an RNA virus quasispecies

RNA viruses display the highest replication error rate in our biosphere, leading to highly diverse viral populations termed quasispecies. The gold standard method for detection and quantification of variants in a quasispecies is cloning and sequencing, but it is expensive, laborious and time consuming. Therefore, other mutation detection approaches, including SSCP, are often used. In this study, we demonstrate development and the usage of a CE‐SSCP method for quantification of two nearly identical viral variants in heterogenic population of a mumps virus strain and its comparison to RFLP‐CE‐fragment length analysis (RFLP‐CE‐FLA). Analyzed PCR fragments were of the same size (245 bp) with one difference in their nucleotide sequence. The limit of detection of both methods was at 5% of the minor variant. When PCR amplicons of the two variants were pooled, methods' results were very similar. On the contrary, the quantification results of samples in which variants were mixed prior to PCR showed substantial difference between the two methods. Our results indicate that although both methods can be used for detection and monitoring of a specific mutation within a viral population, caution should be taken when quantitative analysis of complex samples is based solely on results of one method.     

Silylene-spaced diphenylanthracene derivatives as blue-emitting materials

A novel series of blue emitting silylene-spaced diphenylanthracene derivatives have been synthesized and characterized. The rhodium-catalyzed hydrosilylation of bis[4-(dimethylsilyl)phenyl]anthracene 3-4 yielded stable 9,10-disubstituted (E)-divinylsilylene-diphenylanthracene products 7-10 and salt elimination reaction of bis[4-(chlorodimethylsilyl)phenyl]anthracene 5-6 gave 9,10-disubstituted disilyldiphenylanthracene compounds 11-14. They are fluorescent in the blue region with good quantum efficiencies. The rhodium-catalyzed polyaddition including 2-tert-butyl-9,10-bis[4-(dimethylsilyl)phenyl]anthracene (4) afforded the nonconjugated copolymer 15.     

Thermal behavior of selected Czech marble samples

The definition as well as prediction of rock thermal behavior seems to be a quite difficult problem significantly effected by rock composition and structure. Temperature increase causes various changes of rock material (such as decomposition, oxidation, phase and polymorphic transformation, etc.). These changes are connected to thermal expansion with following appearance of tensions and cracks in minerals and rock structure. After consequential temperature decrease, developed tensions and cracks still influence the process. This study presents the application of thermogravimetric analysis, differential thermal analysis and thermomechanical analysis in characterization of selected marble thermal behavior. The texture and morphological orientation of calcite grains for marble samples was determined by optical microscopy. FTIR spectroscopy application along with X-ray diffraction (XRD) extended data about mineralogical composition. According to optical microscopy, the calcite grains show marked morphological anisotropy in one direction for some samples. Therefore, the thermal expansion had to be measured in three different (perpendicular to each other) directions. It is evident, that the effect of temperature on the final marble properties depends not only on mineralogical composition, but also on structure, texture and morphological orientation of grains. All these facts significantly influence the interpretation of differences in various marble thermal behavior.     

Laser-induced acoustic wave generation/propagation/interaction in water in various internal channels

Short pulsed laser-induced single acoustic wave generation, propagation, interaction within a water-filled internal channel are experimentally and numerically studied. A large-area, short-duration, single-plane acoustic wave was generated by the thermoelastic interaction of a homogenized nanosecond pulsed laser beam with a liquid–solid interface and propagated at the speed of sound in water. Laser flash Schlieren photography was used to visualize the transient interaction of the plane acoustic wave in various internal channel structures ((a) sudden expansion and contraction channels, (b) bifurcating channels, (c) gradual contraction wall channels and (d) a cylinder). Fairly good agreement between the experimental results and numerical simulation is observed.     

A Branched Pore Model Analysis for the Adsorption of Acid Dyes on Activated Carbon

A new branched-pore adsorption model has been developed using an external mass transfer coefficient, K _f, an effective diffusivity, D _eff, a lumped micropore diffusion rate parameter, K _b, and the fraction of macropores, f, to describe sorption kinetic data from initial adsorbent-adsorbate contact to the long-term adsorption phase. This model has been applied to an environmental pollution problem—the removal of two dyes, Acid Blue 80 (AB80) and Acid Red 114 (AR114), by sorption on activated carbon. A computer program has been used to generate theoretical concentration-time curves and the four mass transfer kinetic parameters adjusted so that the model achieves a close fit to the experimental data. The best fit values of the parameters have been determined for different initial dye concentrations and carbon masses. Since the model is specifically applicable to fixed constant values of these four parameters, a further and key application of this project is to see if single constant values of these parameters can be used to describe all the experimental concentration-time decay curves for one dye-carbon system.The error analysis and best fit approach to modeling the decay curves for both dye systems show that the correlation between experimental and theoretical data is good for the fixed values of the four fitted parameters. A significantly better fit of the model predictions is obtained when K _f, K _b and f are maintained constant but D _eff is varied. This indicates that the surface diffusivity may vary as a function of surface coverage.     

Synthesis and complexation of a novel soluble vic-dioxime with hydroxyethyl pendant arms

A new soluble vic-dioxime ligand namely 1,4-bis(2′-hydroxyethyl)-2,3-bis(hydroxyimino)-5,6-diphenylpiperazine, (LH₂) containing optically active centers has been prepared as a mixture of isomers from (CNO)₂ and N,N-bis(2-hydroxyethyl)stilbendiamine (1) which has been made by the reduction of the condensation of the product of benzaldehyde and 2-aminoethanol in the presence of aluminum amalgam. N,N-coordinated planar metal complexes of this ligand have been synthesized with Ni^II, Cu^II, Co^II, Pd^II and U^VIO₂. Oxidation of (LH)₂Co in the presence of a base, such as pyridine, leads to an octahedral complex (LH)₂CopyCl containing pyridine and chloride as axial ligands in addition to vic-dioxime ligands. The structures of the ligand and its complexes are proposed on the basis of elemental analysis, ¹H-n.m.r., mass, i.r. and u.v.–vis. spectral data. This revised version was published online in June 2006 with corrections to the Cover Date.     

Anatase-Rutile Transition of Precipitated Titanium Oxide with Alcohol Rinsing

The effect of alcohol washing on the anatase-rutile transition of precipitated titanium oxide was investigated using X-ray powder diffraction, Fourier-transform IR spectroscopy, and thermogravimetry. Alcohol (butanol) rinsing accelerated the anatase-rutile transition of precipitated titanium oxide powder so that the onset temperature of transition decreased drastically from 800 degrees C for water-washed powder to 550 degrees C for alcohol-rinsed powder. Alternation of transition kinetics and mechanisms by rinsing media could be confirmed from the analysis of temperature and time dependence of rutile content. The attributability of the chemical state of anatase after crystallization, which contained H(2)O, OH, and organic residues, to the change of transition kinetics with alcohol rinsing will be discussed. Two mechanisms, the effect of residual organics and/or H(2)O(OH), could be suggested on the basis of analysis of the difference between chemical states of water-washed anatase and alcohol-rinsed powder. Copyright 2000 Academic Press.     

Synthesis of activated carbon foams with high specific surface area using polyurethane elastomer templates for effective removal of methylene blue

Carbon foams have gained significant attention due to their tuneable properties that enable a wide range of applications including catalysis, energy storage and wastewater treatment. Novel synthesis pathways enable novel applications via yielding complex, hierarchical material structure. In this work, activated carbon foams (ACFs) were produced from waste polyurethane elastomer templates using different synthesis pathways, including a novel one-step method. Uniquely, the produced foams exhibited complex structure and contained carbon microspheres. The ACFs were synthesized by impregnating the elastomers in an acidified sucrose solution followed by direct activation using CO₂ at 1000 ℃. Different pyrolysis and activation conditions were investigated. The ACFs were characterized by a high specific surface area (S_BET) of 2172 m²/g and an enhanced pore volume of 1.08 cm³/g. Computer tomography and morphological studies revealed an inhomogeneous porous structure and the presence of numerous carbon spheres of varying sizes embedded in the porous network of the three-dimensional carbon foam. X-ray diffraction (XRD) and Raman spectroscopy indicated that the obtained carbon foam was amorphous and of turbostratic structure. Moreover, the activation process enhanced the surface of the carbon foam, making it more hydrophilic via altering pore size distribution and introducing oxygen functional groups. In equilibrium, the adsorption of methylene blue on ACF followed the Langmuir isotherm model with a maximum adsorption capacity of 592 mg/g. Based on these results, the produced ACFs have potential applications as adsorbents, catalyst support and electrode material in energy storage systems.     

Comparison of Aqueous and 1-Octanol Solubility as well as Liquid–Liquid Distribution of Acyclovir Derivatives and Their Complexes with Hydroxypropyl-β-Cyclodextrin

The aim of the presented work is the comparison of aqueous and 1-octanol solubilities of different acyclovir derivatives and their hydroxypropyl-β-cyclodextrin inclusion complexes. The solubility measurements were carried out at different temperatures over the range 25–45 °C using water, 1-octanol, water saturated with 1-octanol, 1-octanol saturated with water, buffered aqueous solutions (pH = 5.5 and 7.0) and buffered aqueous solutions containing cyclodextrin as solvents. The aqueous solubilities of the compounds are very low but may be enhanced by complexation with hydroxypropyl-β-cyclodextrin, especially if the acyclovir derivatives have aromatic groups which may be included in the cyclodextrin cavity. The values of 1-octanol–water partition coefficients of acyclovir derivatives, obtained using extraction experiments, showed a similar sequence as the solubility results in 1-octanol. Additionally, some molecular mechanics and molecular dynamic calculations were performed to determine optimized structures of acyclovir derivative complexes with β-cyclodextrin treated as a model.