Self-assembly, characterization, and chemical stability of isocyanide-bound molecular wire monolayers on gold and palladium surfaces

Self-assembled monolayers (SAMs) of the isocyano derivative of 4,4'-di(phenylene-ethynylene)benzene (1), a member of the "OPE" family of "molecular wires" of current interest in molecular electronics, have been prepared on smooth, {111} textured films of Au and Pd. For assembly in oxygen-free environments with freshly deposited metal surfaces, infrared reflection spectroscopy (IRS) indicates the molecules assume a tilted structure with average tilt angles of 18-24 degrees from the surface normal. The combination of IRS, X-ray photoelectron spectroscopy, and density functional theory calculations all support a single sigma-type bond of the -NC group to the Au surface and a sigma/pi-type of bond to the Pd surface. Both SAMs show significant chemical instability when exposed to typical ambient conditions. In the case of the Au SAM, even a few hours storage in air results in significant oxidation of the -NC moieties to -NCO (isocyanate) with an accompanying decrease in surface chemical bonding, as evidenced by a significant increase in instability toward dissolution in solvent. In the case of the Pd SAM, similar air exposure does not result in incorporation of oxygen or loss of solvent resistance but rather results in a chemically altered interface which is attributed to polymerization of the -NC moieties to quasi-2D poly(imine) structures. Conductance probe atomic force microscope measurements show the conductance of the degraded Pd SAMs can diminish by approximately 2 orders of magnitude, an indication that the SAM-Pd electrical contact has severely degraded. These results underscore the importance of careful control of the assembly procedures for aromatic isocyanide SAMs, particularly for applications in molecular electronics where the molecule-electrode junction is critical to the operational characteristics of the device.     

An authentication protocol based on chaos and zero knowledge proof

Nonlinear Dynamics - Port Knocking is a method for authenticating clients through a closed stance firewall, and authorising their requested actions, enabling severs to offer services to...     

Tuning the physical properties of a nematic liquid crystal elastomer actuator

In this report we demonstrate the ability to tune the physical properties of a liquid crystal elastomer (LCE) by varying the amount and type of crosslinking within the elastomer network. LCE films composed of a single mesogenic compound were capable of uniaxial contraction when thermally actuated through the nematic to isotropic phase of the material. We probed the physical properties of the LCE films while varying the amount and concentration of two crosslinking agents and measured actuation strains of 10-35%, elastic moduli of 3-14 MPa, and transition temperatures ranging between 75 and 60°C. The viscous losses of the elastomers and the estimated work capable of being produced by the films were also evaluated. The ability to tune the physical properties of the LCE films allows for a wide range of applications including robotics, microelectromechanical systems (MEMS), shape-changing membranes, and/or microfluidics.     

Laser irradiance of a homogeneous metal slab

Numerical calculations of the effect of laser irradiance was performed for three homogeneous slabs. The temperature profile and the temperature of the front surface for three metals, silver, steel, and aluminium was calculated. The formulation of the temperature distribution of the slab was carried out using Fourier series expansions for the case of time dependent laser irradiance. The exact expressions for the thermal penetration depth and the critical time required to initiate melting (i.e. damage) were found.     

Magnetohydrodynamic flow of Cu–Fe3O4/H2O hybrid nanofluid with effect of viscous dissipation: dual similarity solutions

Journal of Thermal Analysis and Calorimetry - This study shows multiple solutions, heat transfer characteristics, and stability analysis of the magnetohydrodynamic (MHD) flow of hybrid nanofluid...     

Ce-Loaded HZSM-5 Composite for Catalytic Deoxygenation of Algal Hydrolyzed Oil into Hydrocarbons and Oxygenated Compounds

Despite the extensive research into the catalytic uses of zeolite-based catalysts, these catalysts have a limited useful lifetime because of the deactivating effect of coke production. This study looks at the use of Cerium (Ce) loaded HZSM-5 zeolite catalysts in the hydrocarbon and oxygenated chemical conversion from Chlorella Vulgaris microalgae crude oil. Characterization of structure, morphology, and crystallinity was performed after the catalysts were manufactured using the impregnation technique. Soxhlet extraction was carried out to extract the crude oil of microalgae. Transesterification reaction was used to produce algal hydrolyzed oil (HO), and the resulting HO was put to use in a batch reactor at 300 °C, 1000 rpm, 7 bars of nitrogen pressure, a catalyst to the algal HO ratio of 15% (wt. %), and a retention time of 6 h. To determine which Ce-loaded HZSM-5 catalysts would be most effective in converting algal HO into non-oxygenated molecules (hydrocarbons), we conducted a series of tests. Liquid product characteristics were analyzed for elemental composition, higher heating value (HHV), atomic ratios of O/C and H/C, and degree of deoxygenation (DOD%). Results were categorized into three groups: product yield, chemical composition, and carbon number distribution. When Cerium was added to HZSM-5 zeolite at varying loading percentages, the zeolite’s acid sites became more effective in facilitating the algal HO conversion. The results showed that 10%Ce/HZSM-5 had the greatest conversion of the algal HO, the yield of hydrocarbons, HHV, and DOD% (98.2%, 30%, 34.05 MJ/Kg, and 51.44%, respectively) among all the synthesized catalysts in this research. In conclusion, the physical changes seen in the textural characteristics may be attributed to Cerium-loading on the parent HZSM-5; nevertheless, there is no direct association between the physical features and the hydrocarbons yield (%). The primary impact of Cerium alteration of the parent HZSM-5 zeolite was to change the acidic sites required to boost the conversion (%) of the algal HO in the catalytic deoxygenation process, which in turn increased the hydrocarbons yield (%), which in turn increased the HHV and DOD%.     

Synthesis of DNA interstrand cross-links using a photocaged nucleobase

The missing linking: BCNU is a chemotherapy drug that generates an ethylene bridge between N(1) of deoxyguanosine and N(3) of deoxycytidine. No synthesis of a DNA containing this moiety has been reported until now. A new strategy uses a photocaged nucleobase that, when released, generates a highly reactive intermediate which cross-links the opposing DNA strand in a manner analogous to BCNU (see scheme, NBOC=ortho-nitrobenzyloxycarbonyl).     

Hole mediated coupling in Sr2Nb2O7 for visible light photocatalysis

The band gap reduction and effective utilization of visible solar light are possible by introducing the anionic hole-hole mediated coupling in Sr(2)Nb(2)O(7). By using the first principles calculations, we have investigated the mono- and co-anionic doping (S, N and C) in layered perovskite Sr(2)Nb(2)O(7) for the visible-light photocatalysis. Our electronic structure and optical absorption study shows that the mono- (N and S) and co-anionic doped (N-N and C-S) Sr(2)Nb(2)O(7) systems are promising materials for the visible light photocatalysis. The calculated binding energies show that if the hole-hole mediated coupling could be introduced, the co-doped systems would be more stable than their respective mono-doped systems. Optical absorption curves indicate that doping S, (N-N) and (C-S) in Sr(2)Nb(2)O(7) can harvest a longer wavelength of the visible light spectrum as compared to the pure Sr(2)Nb(2)O(7) for efficient photocatalysis.