Synthesis of corrected multi-wavelength spectrometers for atmospheric trace gases

The method for synthesis of corrected three-wavelengths spectrometers for trace gas components of atmo- sphere on the basis of development of mathematical model has been suggested. The classification table for possible structures of corrected spectrometers is considered. The synthesis allows to reveal some new variants for development of three-wavelength spectrometers for trace gas components of atmosphere. For experimental checkup of achieved theoretical results, a laboratory pattern of three-wavelength spectrome- ter is developed and tested.     

Prediction of viscosities and COSMO-RS analyses in binary mixtures of N,N-dimethylformamide with acetone

Experimental viscosities, η, for pure N,N-dimethylformamide (DMF) and acetone (ACT) and their binary mixtures are measured over the whole composition range as a function of temperature between 298.15 and 313.15 K. The deviations in viscosity, ?η, Gibbs free energy of activation ?G, entropies ?S*, enthalpies ?H of activation of viscous flow have been calculated. The determination of excess molar volumes, Vη^E, was calculated from the experimental viscosities for the binary mixtures. The conductor-like screening model is applied to interpret the intermolecular forces. The σ-profile is computed for the N,N-DMF and ACT with conductor-like screening model for real solvents. The experimental results were found to be in good agreement with the theoretical predictions. Moreover, viscosity data were calculated from the theoretical equations of Grunberg and Nissan, Hind et al. and Wilke for the entire systems. All results obtained were averaged experimentally and theoretically in terms of average deviations.     

Flow injection spectrophotometric determination of vitamin E in pharmaceuticals,milk powder and blood serum using potassium ferricyanide-Fe(Ⅲ) detection system

<正>A simple and sensitive flow injection spectrophotometric method is reported for the determination of vitamin E using potassium ferricyanide-Fe(Ⅲ) detection system.In the presence of vitamin E,Fe(Ⅲ)/ferricyanide reduces.The in situ reduced ions are then reacted with unreduced portion of ferricyanide/Fe(Ⅲ) to make soluble Prussian blue,which is monitored at absorption wavelength of 735 nm.Linear calibration graph was obtained in the concentration range of 0.1-40μg mL~(-1).The relative standard deviations (n=4) were in the range of 1.1-3.6%,with limits of detection(3 s blank) of 0.04μg mL~(-1).The proposed method allowed 12 injections h~(-1).The method is applied to determine vitamin E in pharmaceuticals,infant milk and blood serum samples using hexane extraction with the recoveries in the range of 93±3 to 97.5±4%.The method is validated using certified reference materials SRM 968c for blood serum samples.     

Efficient construction of cyclopenta[b]quinoline core of isoschizozygane alkaloids via intramolecular formal hetero-Diels-Alder reaction

[reaction: see text] Acid-catalyzed condensation of aromatic amines with delta,epsilon-unsaturated aldehydes, followed by intramolecular formal hetero Diels-Alder reaction, is described as a potential route to the cyclopenta[b]quinoline substructure of isoschizozygane alkaloids. Reactions are highly diastereoselective and produce adducts with up to four contiguous stereocenters.     

The bioluminescent determination of adenosine triphosphate with a flow-injection system

A procedure is described, for the bioluminescent determination of adenosine- 5′-triphosphate (ATP), based on firefly luciferin and luciferase and a purpose-built flow-through detector. The limit of detection is 10^?14 mol and the sample throughput is 200 h^?1. The useful response range for a 30-μl sample was 10^?6–10^?4 M ATP and the correlation coefficient (r) for a log-log plot over this range was 0.9991.     

Chromatography of alkaloids on titanium arsenate papers and quantitative separation of some alkaloids from nicotine on titanium arsenate columns

Columns and papers of titanium arsenate have been utilized for chromatographic studies of several alkaloids in aqueous and mixed solvent systems. The results have been compared with those obtained with plain papers. A number of separations have been achieved on papers impregnated with titanium arsenate. Distribution coefficients of these alkaloids have been determined. A number of alkaloids have been separated quantitatively from nicotine on titanium arsenate columns.     

Ion-selective characteristics of heavy metal myristate liquid membrane electrodes

Liquid membrane electrodes of myristate soaps of heavy metals, namely copper, cadmium, zinc, nickel, cobalt, strontium and barium in a benzene-n-butanol mixture were prepared. Each electrode showed nernstian response in common metal ion test solution. The range of concentration of the test solution for the Nernstian behaviour lies between 10^?4 and 10^?1M. With a dissimilar metal ion in test solution the metal soap liquid membrane electrode indicates deviations from Nernst's equation depending on the nature of the metal ion, suggesting different selectivities for different ions. The selectivity ratios are therefore calculated.     

Copper nanoparticles supported on 2‐methoxy‐1‐phenylethanone‐functionalized MCM‐41: An efficient and recyclable catalyst for one‐pot three‐component C–S coupling reaction of aryl halides with benzyl bromide and thiourea

An environmentally friendly copper‐based catalyst supported on 2‐methoxy‐1‐phenylethanone‐functionalized MCM‐41 was prepared and characterized by Fourier transform‐infrared, transmission electron microscopy, field emission‐scanning electron microscopy, X‐ray diffraction and inductively coupled plasma techniques. The catalyst was applied for the one‐pot three‐component C–S coupling reactions of aryl halides with benzyl bromide and thiourea under aerobic conditions to afford the corresponding coupled products in good yields in water. The catalyst could be recovered and recycled five times. These results prove 2‐methoxy‐1‐phenylethanone‐functionalized MCM‐41 supported Cu (II) complex was not leached during the reaction. Also it shows the correct heterogeneous nature of the catalyst.     

Dynamic surface tension analysis of dodecyl sulfate association complexes

First, a novel calibration method is used to expand the current understanding of spherical drop growth and elongation that occurs during on-line measurements of surface pressure using the dynamic surface tension detector (DSTD). Using a novel surface tension calibration method, the drop radius is calculated as a function of time from experimental drop pressure data and compared to the theoretical drop radius calculated from volumetric flow rate. From this comparison, the drop volume at which the drop shape starts to deviate ( approximately 4 mul) from a spherical shape is readily observed and deviates more significantly by approximately 6 mul drop volume (5% deviation in the ideal spherical drop radius) for the capillary sensing tip employed in the DSTD. From this assessment of drop shape, an experimental method for precise drop detachment referred to as pneumatic drop detachment is employed at a drop volume of 2 mul (two second drops at 60 mul/min) in order to provide rapid dynamic surface tension measurements via the novel on-line calibration methodology. Second, the DSTD is used to observe and study kinetic information for surface-active molecules and association complexes adsorbing to an air-liquid drop interface. Dynamic surface tension measurements are made for sodium dodecyl sulfate (SDS) in the absence and presence of either tetra butyl ammonium (TBA) or chromium (III). Sensitive, indirect detection of chromium and other multiply charged metals at low concentrations is also investigated. The DSTD is utilized in examining the dynamic nature of SDS: cation association at the air-liquid interface of a growing drop. Either TBA or Cr(III) were found to substantially enhance the surface tension lowering of dodecyl sulfate (DS), but the surface tension lowering is accompanied by a considerable kinetic dependence. Essentially, the surface tension lowering of these DS: cation complexes is found to be a fairly slow process in the context of the two second DSTD measurement. The limit of detection for both SDS and chromium (III) is in the 300-400 part-per-billion (by mass) range.     

Ion acoustic solitary waves in magnetized electron–positron–ion plasmas with Tsallis distributed electrons

The propagation of ion acoustic (IA) solitary waves is investigated in a magnetized electron-positron-ion (EPI) plasma with Tsalli distributed electrons and Maxwellian positrons. A non-linear Korteweg–de Vries (KdV)-type equation is derived for the potential by using the reductive perturbation method (RPM), and its solitary wave solution is analysed. For a given set of plasma parameters, the present model supports only compressive IA solitary structures. It is found that the variation of various relevant plasma parameters, like the nonextensive parameter q, temperature ratio σ , direction cosine l_z , the positron concentration γ and the magnetic field strength Ω significantly alter the characteristic properties of IA solitary waves.