Simplifying patterning process of ZnO nanowires by one step development and etching process

We present herein a simple protocol of growing a patterned ZnO nanowire by etching of ZnO seed layer in the tetramethyl ammonium hydroxide (TMAH) solution. The ZnO seed layer was fabricated by sol–gel method using zinc acetate solution and patterned by using photolithographic method. Patterned ZnO seed layer as etched in the TMAH solution, followed by growth of ZnO nanowires by hydrothermal method. Remarkable point of present ZnO seed layer patterning is that development of UV-exposed photoresist and etching of ZnO seed layer is subsequently processed in aqueous TMAH solution without interruption. The grown ZnO nanowires were analyzed using XRD patterns to exhibit high purity and degree of crystallinity, and showed very good pattern fidelity.     

Relationships between structure,ionization profile and sensitivity of exogenous anabolic steroids under electrospray ionization and analysis in human urine using liquid chromatography–tandem mass spectrometry

The relationships between the ionization profile, sensitivity, and structures of 64 exogenous anabolic steroids (groups I–IV) was investigated under electrospray ionization (ESI) conditions. The target analytes were ionized as [M + H]⁺ or [M + H–nH₂O]⁺ in the positive mode, and these ions were used as precursor ions for selected reaction monitoring analysis. The collision energy and Q3 ions were optimized based on the sensitivity and selectivity. The limits of detection (LODs) were 0.05–20 ng/mL for the 64 steroids. The LODs for 38 compounds, 14 compounds and 12 compounds were in the range of 0.05–1, 2–5 and 10–20 ng/mL, respectively. Steroids including the conjugated keto‐functional group at C3 showed good proton affinity and stability, and generated the [M + H]⁺ ion as the most abundant precursor ion. In addition, the LODs of steroids using the [M + H]⁺ ion as the precursor ion were mostly distributed at low concentrations. In contrast, steroids containing conjugated/unconjugated hydroxyl functional groups at C3 generated [M + H ? H₂O]⁺ or [M + H ? 2H₂O]⁺ ions, and these steroids showed relatively high LODs owing to poor stability and multiple ion formation. An LC‐MS/MS method based on the present ionization profile was developed and validated for the determination of 78 steroids (groups I–V) in human urine. Copyright © 2015 John Wiley & Sons, Ltd.     

Comparative studies of bioactive organosulphur compounds and antioxidant activities in garlic (Allium sativum L.), elephant garlic (Allium ampeloprasum L.) and onion (Allium cepa L.)

We evaluated organosulphur compounds in Allium vegetables, including garlic, elephant garlic and onion, using high-performance liquid chromatography. Among organosulphur compounds, elephant garlic had considerable γ-glutamyl peptides, and garlic had the highest alliin content. Onion had low level of organosulphur compounds than did elephant garlic and garlic. In addition, antioxidant capacities were evaluated by oxygen radical absorbance capacity (ORAC) values and 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2′-azinobis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) radical scavenging assay. The results showed that garlic had the highest antioxidant capacity, followed by elephant garlic and onion. Furthermore, a positive correlation was observed between antioxidant activities and organosulphur compounds (R > 0.77). Therefore, our results indicate that there was a close relationship between antioxidant capacity and organosulphur compounds in Allium vegetables.     

Curvature measurement using phase shifting in-line interferometry,single shot off-axis geometry and Zernike's polynomial fitting

This paper describes the difference between phase shifting in-line interferometry, single shot off-axis geometry and Zernike's polynomial fitting methods for measuring the curvature of a spherical smooth surface by using the Michelson interferometer. In phase shifting in-line interferometry, four interferograms shifted by a piezoelectric actuator (PZT) were captured by a digital detector and corrected by using the flat fielding method. In off-axis geometry, single shot off-axis interferogram was obtained by tilting the reference and the object wave of the off-axis interferogram was reconstructed in the central region of the observation plane by using the digital reference wave concept. The demodulated phase map was obtained and unwrapped to remove the 2π ambiguity. The unwrapped phase map was converted to height and the sagittal length that used for curvature measurement was calculated accurately. The results extracted from phase shifting in-line interferometry and single shot off-axis geometry methods were compared with the results extracted from single shot Zernike's polynomial fitting method and the results were in excellent agreement. A new trial was done to overcome the fringes produced from the object interfaces. Some factors of uncertainty which affected on the measurement were estimated in the order of 6.0 × 10^?5 mm or 0.003 dioptre (▽).     

Viscosity dependence of electrochemical etching for gold tip fabrication

We suggest an electrochemical etching method with viscous etchant to enhance the sharpness of tip of scanning probe microscope. The viscosity of the etchant mixed with HCl solution and glycerol was used as a control parameter in addition to the voltage applied to the tip. In order to improve the sharpness of the tip, a nano-scale meniscus formed between the end of the tip and the liquid level was used. The shapes, aspect ratios, and radii of tips were measured depending on the concentration of the etchant. It was found that the tip etched with the mixed liquid with glycerol was sharper than the tip with the pure HCl solution. This can be explained by the fact that the meniscus formed by viscous liquid is maintained with a thinner diameter and causes final etching until the meniscus bridge is ruptured.     

A Mild and Efficient Tetrahydropyranylation of Alcohols

Triphenylphosphine (TPP)-iodotrimethylsilane (TMSI) was found to be a convenient and highly effective catalyst for the tetrahydropyranylation of aliphatic and aromatic alcohols with dihydropyran in dichloromethane at ambient temperature.     

Recent Developments in Robust Portfolios with a Worst-Case Approach

Robust models have a major role in portfolio optimization for resolving the sensitivity issue of the classical mean–variance model. In this paper, we survey developments of worst-case optimization while focusing on approaches for constructing robust portfolios. In addition to the robust formulations for the Markowitz model, we review work on deriving robust counterparts for value-at-risk and conditional value-at-risk problems as well as methods for combining uncertainty in factor models. Recent findings on properties of robust portfolios are introduced, and we conclude by presenting our thoughts on future research directions.     

Measurement of <Superscript>99</Superscript>Mo production cross-section from the <Superscript>100</Superscript>Mo(n,2n) reaction with quasi monoenergetic neutron based on the <Superscript>9</Superscript>Be(p,n) reaction

The production cross-section of the medical isotope, ⁹⁹Mo from the enriched ¹⁰⁰Mo(n,2n) reaction with the average neutron energies of 21.9 and 26.5 MeV has been determined for the first time by using an off-line γ-ray spectrometric technique. The average neutron energies were generated by using the ⁹Be(p,n) reaction with the proton energies of 35 and 45 MeV from the MC50 cyclotron of the Korea Institute of Radiological and Medical Sciences (KIRAMS) at Seoul, South Korea. The ¹⁰⁰Mo(n,2n) reaction cross-section as a function of neutron energy was also calculated theoretically by using the computer code TALYS-1.8 and EMPIRE-3.2 Malta. The experimental results are in close agreement with the theoretical values from TALYS-1.8. However, the present data at the neutron energy of 21.9 MeV is slightly lower and at 26.5 MeV is higher than the values from EMPIRE-3.2 Malta.