Preparation of self-supporting molecularly imprinted films via transition layer construction and RAFT polymerization, and their use in HPLC

Molecularly imprinted films with self-supporting property (SS-MIFs) have been prepared by using the strategy of transition layer construction followed by reversible addition-fragmentation chain transfer (RAFT) polymerization. The structure, composition and selectivity of the SS-MIFs as well as the mechanism of mass transfer were characterized by scanning electron microscopy, X-ray diffraction, Fourier transform IR spectrometry, specific surface area analysis, thermogravimetric analysis, and HPLC. Surface area analysis showed the samples possessed specific surface areas as high as 80.5 m².g^?1. This is almost 9 times more than that of the original porous anodic aluminum oxide substrate. Thermogravimetric analysis also showed the samples to be thermally stable up to 350 °C. The separating power was investigated by HPLC and revealed a selective separation effect for the target molecules theobromine. The separation factor is 5.37.

From Zero‐dimensional to One‐dimensional: Use of Metal‐­Ligand Affinity in Supramolecular Assembly

The self‐assembly of 4 ‐ MTPP [ 4 ‐ MTPP = 2‐(methylthio)‐4‐(pyridin‐4‐yl)pyrimidine] with Cu(NO₃)₂ and AgNO₃ was structurally investigated. For Cu(NO₃)₂, a discrete mononuclear Cu^II coordination compound, [Cu( 4 ‐ MTPP )₂(NO₃)₂] ( 1 ), resulted that is exclusively based on Cu–N coordination. For AgNO₃, a unique one‐dimensional double‐chain structure ( 2 ) was obtained with the Ag–N distances varying from 2.181(9) to 2.223(9) Å, and the average Ag–S distance being 2.98 Å. Compared to zero‐dimensional 1 , the extension to one‐dimensional 2 is considered to result from the specific affinity between Ag⁺ and the ligand 4 ‐ MTPP that is attributed to the strong coordinating tendency of silver for aromatic nitrogen and thioether sulfur atoms.     

Solubility of Icariin in a Binary Solvent System of Ethanol and Water

The solubility of icariin in the binary solvent system of ethanol and water was measured by UV–Vis spectrophotometry from 288.2 to 328.2 K. The solubility of icariin in the system increased with increasing temperature. A synergistic effect appeared at x ₂ = 0.4 (equivalent to 68.34 % ethanol, v/v) binary mixture. Solubility data were correlated with the modified Apelblat equation. The enthalpy and entropy of solution were evaluated using van’t Hoff plots.     

Terbinafine hydrochloride intercalated in montmorillonite: synthesis and characterization

The novel antifungal hybrid of terbinafine hydrochloride (TER-HCl)/montmorillonite was synthesized by the intercalation method under mechanical stirring. Intercalation of TER-HCl in the MMT galleries was characterized by X-ray diffraction (XRD), Fourier transform infrared spectra, elemental analysis (EA). and thermogravimetric analysis (TGA). The results from IR, TGA, and EA showed a difference in chemical composition of the MMT and the TER-HCl/MMT. XRD analysis showed that the basal spacing of montmorillonite significantly expanded from 1.53 to 2.79 nm. TER-HCl was successfully intercalated into the interlayer of MMT, and 28 % of TER-HCl was released after 48 h in 0.9 % (w/v) NaCl aqueous solution (pH 7) at 37 ± 0.5 °C. The antifungal activity of the hybrid against Candida albicans was evaluated using the inhibitory zone method and the minimum inhibitory concentration. The TER-HCl/MMT strongly inhibited C. albicans. These results show that TER-HCl/MMT can be useful in biomedical applications.     

基于聚甲基丙烯酸酯类固相微萃取头的SPME-HPLC联用检测环境水样中的痕量芳香烃

建立了一种新型的聚甲基丙烯酸酯类整体柱固相微萃取的样品预处理方法,并与高效液相色谱法联用检测环境水样中的芳香烃。实验采用的固相微萃取材料聚(甲基丙烯酸丁酯-乙二醇二甲基丙烯酸酯)(Poly(BMA-EDMA))对芳香烃类化合物具有较高的萃取效率,优化了萃取时间、盐浓度、解吸时间等条件。5种芳香烃在10～100μg/L的范围内线性关系良好,检出限为0.012～1.316μg/L,相对标准偏差(n=6)为6.5%～18%。用该法分析湖水中的痕量芳香烃,除甲苯外,其他4种芳香烃的加标回收率为90.8%～99.8%。方法适用于快速分析环境水样中的痕量芳香烃。     

亚硝酸根在纳米氧化锆-CTAB复合物膜修饰电极上的电化学行为及测定

制备了纳米ZrO2,采用XRD和原子力显微镜技术加以表征。构建了十六烷基三甲基溴化铵-纳米ZrO2修饰电极。用循环伏安法和示差脉冲伏安法研究了亚硝酸根(NO2-)在该修饰上的电化学行为,结果表明,该修饰电极对NO2-的氧化具有良好的电催化能力,示差脉冲伏安信号与其浓度在6×10-7～1.6×10-4mol/L范围内呈现良好的线性关系,检出限为1.3×10-7mol/L(S/N=3)。此外,方法已用于NO2-样品的测定。     

邻苯二酚和对苯二酚在电活化玻碳电极上的电化学行为及同时测定

制备了电活化的玻碳电极,利用循环伏安法研究了邻苯二酚和对苯二酚在该电极上的电化学行为,结果表明该电极对两者的氧化还原具有很好的电催化能力。在0.1 mol/L PBS(pH 7.0)中,采用示差脉冲伏安法对对苯二酚和邻苯二酚分别测定和同时测定,对苯二酚和邻苯二酚的氧化峰电流与其浓度分别在3.0×10-7～1.2×10-5 mol/L和1.0×10-7～1.2×10-5 mol/L范围内呈良好的线性关系,检测限分别为1.0×10-7和6.34×10-8mol/L(S/N=3)。该法已用于模拟废水样中对苯二酚和邻苯二酚的测定。     

EDTA滴定法连续测定锆-铁-钇含量

探讨了准确测定废旧锆钇陶瓷回收时产生的酸性溶液中锆、铁、钇的含量时,乙酰丙酮、三乙醇胺和柠檬酸等铁离子掩蔽剂,以及偶氮砷Ⅲ、甲基百里酚蓝和二甲酚橙等指示剂对测定结果的影响,确定仅以二甲酚橙为指示剂,盐酸羟胺为还原剂,用EDTA滴定法连续测定了溶液中的锆、铁、钇含量,测定结果的RSD<2%。     

罗丹明类光学传感器在金属离子细胞成像中的应用

由于优良的光学性能和较宽的pH值适用范围,罗丹明类物质已经被广泛选作重金属与过渡金属离子细胞成像光学传感器的光学母体.对近年来罗丹明类光学传感器在重金属与过渡金属离子细胞成像中的应用进行了详细综述,包括设计思路、作用机理、应用范围等都进行了详细的比较分析.另外,提出了罗丹明类重金属和过渡金属细胞成像光学传感器目前存在的问题和今后的发展趋势.