MnO2‐Modified Persistent Luminescence Nanoparticles for Detection and Imaging of Glutathione in Living Cells and In Vivo

Persistent luminescence nanoparticles (PLNPs) hold great promise for the detection and imaging of biomolecules. Herein, we have demonstrated a novel nanoprobe, based on the manganese dioxide (MnO₂)‐modified PLNPs, that can detect and image glutathione in living cells and in vivo. The persistent luminescence of the PLNPs can be efficiently quenched by the MnO₂ nanosheets. In the presence of glutathione (GSH), MnO₂ was reduced to Mn²⁺ and the luminescence of PLNPs can be restored. The persistent luminescence property can allow detection and imaging without external excitation and avoid the background noise originating from the in situ excitation. This strategy can offer a promising platform for detection and imaging of reactive species in living cells or in vivo.     

固相萃取-高效液相色谱法测定果蔬中异菌脲残留量

建立了固相萃取-高效液相色谱法测定果蔬中异菌脲残留量的方法。样品用乙腈提取,C18固相萃取柱净化,甲醇-水(70:30,V/V)为流动相,经C18液相色谱柱分离,DAD紫外检测器(218 nm)检测。结果表明:异菌脲在0.1~2.0 mg/L范围内线性关系良好(R2=0.9998),方法定量限(以S/N=10计)为0.05 mg/kg,在0.05,0.1,0.5 mg/kg添加水平下的加标回收率范围为81.3%~98.3%,相对标准偏差(n=6)为3.9%~8.9%。方法适用于大多数水果、蔬菜中异菌脲残留量的测定。     

用于组胺检测的MWCNT/ZnO/Nafion复合物膜修饰的电化学发光传感器的研究

基于含有氨基类物质对三联吡啶钌电化学发光的促进作用,建立了直接测定组胺的电化学发光方法。通过MWCNT/ZnO/Nafion复合物膜修饰玻碳电极(GC)固定三联吡啶钌,研究了此工作电极在组胺溶液中的ECL发光行为。在最优的实验条件下,组胺质量浓度在1.0~1.0×104ng/mL范围内时其对数值与电化学发光信号呈良好的线性关系(R2=0.9968),检出限为0.64 ng/mL,组胺的加标回收率为96%~103%,RSD为2.7%。     

碱金属掺杂叔丁基杯[4]芳烃体系的结构及非线性光学性质

采用密度泛函理论B3LYP方法得到了M@t-Bu-calix[4]arene和(M@t-Bu-calix[4]arene)Li′(M=Li,Na,K)体系的几何结构.其中(M@t-Bu-calix[4]arene)Li′(M=Li,Na,K)三个体系各有5个稳定异构体,在前三个异构体中,碱金属与t-Bu-calix[4]arene分子间具有很强的相互作用能,说明了体系的稳定性.在部分(M@t-Bucalix[4]arene)Li异构体中Li′原子以阴离子形式存在,整个体系表现出碱金属化物的特性.此外,使用CAMB3LYP方法计算了t-Bu-calix[4]arene及碱金属掺杂后体系的非线性光学性质.结果表明,t-Bu-calix[4]arene内部掺杂一个碱金属原子M后,体系的一阶超极化率(β0)有较大提高,而在配体外部又掺杂一个Li原子后,体系具有更大的β0值.其中(M@t-Bu-calix[4]arene)Li′体系的MLi′-4异构体表现出最高的β0值(41827-114354 a.u.),并且随着M原子序数的增加而逐渐增大.可见,碱金属掺杂是提高t-Bu-calix[4]arene非线性光学响应的一种有效策略.     

Discovery of Cell‐Permeable Inhibitors That Target the BRCT Domain of BRCA1 Protein by Using a Small‐Molecule Microarray

BRCTs are phosphoserine‐binding domains found in proteins involved in DNA repair, DNA damage response and cell cycle regulation. BRCA1 is a BRCT domain‐containing, tumor‐suppressing protein expressed in the cells of breast and other human tissues. Mutations in BRCA1 have been found in ca. 50 % of hereditary breast cancers. Cell‐permeable, small‐molecule BRCA1 inhibitors are promising anticancer agents, but are not available currently. Herein, with the assist of microarray‐based platforms, we have discovered the first cell‐permeable protein–protein interaction (PPI) inhibitors against BRCA1. By targeting the (BRCT)₂ domain, we showed compound 15 a and its prodrug 15 b inhibited BRCA1 activities in tumor cells, sensitized these cells to ionizing radiation‐induced apoptosis, and showed synergistic inhibitory effect when used in combination with Olaparib (a small‐molecule inhibitor of poly‐ADP‐ribose polymerase) and Etoposide (a small‐molecule inhibitor of topoisomerase II). Unlike previously reported peptide‐based PPI inhibitors of BRCA1, our compounds are small‐molecule‐like and could be directly administered to tumor cells, thus making them useful for future studies of BRCA1/PARP‐related pathways in DNA damage and repair response, and in cancer therapy.     

Gold nanoparticles-enhanced bisphenol A electrochemical biosensor based on tyrosinase immobilized onto self-assembled monolayers-modified gold electrode

A novel electrochemical sensor based on the immobilization of tyrosinase(tyr) onto gold nanoparticles(nano-Au) and thioctic acid amide(T-NH2) self-assembled monolayers(SAMs)-modified gold electrode has been developed for the determination of bisphenol A(BPA).It was found that the nano-Au could significantly enhance the electrochemical response of tyr/nano-Au/T-NH2/Au electrode to BPA,and the enhancement effect of nano-Au on the current response was also related to the enzyme.The results indicated that the biosensor could be used as a detector for BPA determination with a linear range from3.99 ×10-7mol/L to 2.34 ×10-4mol/L and a detection limit of 1.33×10-7mol/L.In addition,this biosensor showed good reproducibility.     

A novel method for the synthesis of sulfur substituted-cyclopyrophosphate of cADPR analogs

A facile and efficient protocol for the synthesis of sulfur substituted-cyclopyrophosphate of cIDPRE(P_S~1-cIDPRE) was developed.The key step was the cyclization process which was completed by the sulfur substituted cyclization precursor 1b via the one-pot phosphoramidite strategy.     

Efficient oxidation of ethylbenzene catalyzed by cobalt zeolitic imidazolate framework ZIF-67 and NHPI

Efficient catalytic oxidation of ethylbenzene to acetophenone was realized using the catalytic system of cobalt zeolitic imidazolate framework ZIF-67/N-hydroxyphthalimide （NHPI） under mild conditions. 95.2% conversion of ethylbenzene with 90.3% selectivity to acetophenone could be obtained at 373 K under 0.3 MPa 02 for 9 h. The results show that there exists synergetic effect between ZIF-67 and NHPI. 1-Phenylethyl hydroperoxide （PEHP） was generated via a radical process involving the hydrogen abstraction from ethylbenzene by phthalimide N-oxyl, and subsequently effectively decomposed to acetophenone by ZIF-67.     

Effects of Additives on Lipase Immobilization in Microemulsion-Based Organogels

An inexpensive, facile, and environmentally benign method was developed to improve the activity and stability of Candida rugosa lipase (triacylglycerol acylhydrolase) immobilized on microemulsion-based organogels (CRL MBGs) via the addition of additives during immobilization. The additives used were polyethylene glycol (PEG) or polysaccharides. This study is the first report on the effect of additives in CRL MBGs. Among the tested additives, PEG produced the most improvement in the immobilized CRL, enhancing its stability in organic solvents (specifically polar solvents). The results of circular dichroism and fluorescence spectra experiments indicated that exposure of the acidic CRL to electronegative additives in the buffer, such as polyethylenimine and the electropositive surfactant cetyltrimethylammonium bromide, may change the lipase secondary structure, ultimately causing enzyme inactivation. However, sodium bis(2-ethylhexyl)sulfosuccinate and PEG 2000 had minimal effects on the secondary structure of CRL. The CRL MBGs containing PEG 2000 demonstrated remarkable retention of their catalytic activity during the recycling test. No significant changes in enzymatic activity were observed, even after nine runs, and 90 % of the original yield was maintained after 15 cycles.     

Atomic-Scale Insight into Exsolution of CoFe Alloy Nanoparticles in La0.4Sr0.6Co0.2Fe0.7Mo0.1O3−δ with Efficient CO2 Electrolysis

In situ exsolution of metal nanoparticles in perovskite under reducing atmosphere is employed to generate a highly active metal–oxide interface for CO₂ electrolysis in a solid oxide electrolysis cell. Atomic-scale insight is provided into the exsolution of CoFe alloy nanoparticles in La_0.4Sr_0.6Co_0.2Fe_0.7Mo_0.1O_3−δ (LSCFM) by in situ scanning transmission electron microscopy (STEM) with energy-dispersive X-ray spectroscopy and DFT calculations. The doped Mo atoms occupy B sites of LSCFM, which increases the segregation energy of Co and Fe ions at B sites and improves the structural stability of LSCFM under a reducing atmosphere. In situ STEM measurements visualized sequential exsolution of Co and Fe ions, formation of CoFe alloy nanoparticles, and reversible exsolution and dissolution of CoFe alloy nanoparticles in LSCFM. The metal–oxide interface improves CO₂ adsorption and activation, showing a higher CO₂ electrolysis performance than the LSCFM counterparts.