KrVI离子能级和振子强度的理论计算

利用组态相互作用理论和参数外推法,计算了KrVI离子4s~24p—4s4p~2、4s~24p—4s~24d和4s4p~2—4p~3跃迁的能级、谱线波长和振子强度。与已有实验结果比较表明:波长的理论计算值与观测值在0.7A内很好符合,振子强度的理论计算值较大的跃迁均是实验中观测到的跃迁。     

高密度氩气的原子间相互作用与状态方程

本文从高密度气体的原子间相互作用出发进行思考,在修改范德瓦耳方程的基础上,提出了一种新的适用于高密度气体的状态方程,并用以对氩气临界区的等温压缩线进行计算,结果与实验值很符合.     

监测Lévy稳定过程均值变点的平均运行时间估计

平均运行长度(时间)(ARL)是判断一控制图监测变点效果好坏的一个重要工具.本文主要研究Lévy稳定过程的均值变点监测问题.我们给出了三个控制图,即EWMA,GEWMA和GLR的ARL估计,并通过数值模拟比较了4个控制图监测均值变点的效果和差异.     

Synthesis and micellization of amphiphilic poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride) block copolymers

Amphiphilic biodegradable block copolymers [poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride)] were synthesized by the melt polycondensation of poly(ethylene glycol) and sebacic anhydride prepolymers. The chemical structure, crystalline nature, and phase behavior of the resulting copolymers were characterized with ¹H NMR, Fourier transform infrared, gel permeation chromatography, and differential scanning calorimetry. Microphase separation of the copolymers occurred, and the crystallinity of the poly(sebacic anhydride) (PSA) blocks diminished when the sebacic anhydride unit content in the copolymer was only 21.6%. ¹H NMR spectra carried out in CDCl₃ and D₂O were used to demonstrate the existence of hydrophobic PSA domains as the core of the micelle. In aqueous media, the copolymers formed micelles after precipitation from water‐miscible solvents. The effects on the micelle sizes due to the micelle preparation conditions, such as the organic phase, dropping rate of the polymer organic solution into the aqueous phase, and copolymer concentrations in the organic phase, were studied. There was an increase in the micelle size as the molecular weight of the PSA block was increased. The diameters of the copolymer micelles were also found to increase as the concentration of the copolymer dissolved in the organic phase was increased, and the dependence of the micelle diameters on the concentration of the copolymer varied with the copolymer composition. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1271–1278, 2006     

Investigation of sulfonated poly(ether ether ketone sulfone)/heteropolyacid composite membranes for high temperature fuel cell applications

The sulfonated poly(ether ether ketone sulfone) (SPEEKS)/heteropolyacid (HPA) composite membranes with different HPA content in SPEEKS copolymers matrix with different degree of sulfonation (DS) were investigated for high temperature proton exchange membrane fuel cells. Composite membranes were characterized by Fourier transfer infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). FTIR band shifts suggested that the sulfonic acid groups on the copolymer backbone strongly interact with HPA particles. SEM pictures showed that the HPA particles were uniformly distributed throughout the SPEEKS membranes matrix and particle sizes decreased with the increment of copolymers' DS. The holes were not found in SPEEKS‐4/HPA30 (consisting of 70% SPEEKS copolymers with DS = 0.8 and 30% HPA) composite membrane after composite membranes were treated with boiling water for 24 h. Thermal stabilities of the composite membranes were better than those of pure sulfonated copolymers membranes. Although the composite membranes possessed lower water uptake, it exhibited higher proton conductivity for SPEEKS‐4/HPA30 especially at high temperature (above 100 °C). Its proton conductivity linearly increased from 0.068 S/cm at 25 °C to 0.095 S/cm at 120 °C, which was higher than 0.06 S/cm of Nafion 117. In contrast, proton conductivity of pure SPEEKS‐4 membrane only increased from 0.062 S/cm at 25 °C to 0.078 S/cm at 80 °C. At 120 °C, proton conductivity decreased to poor 0.073 S/cm. The result indicated that composite membranes exhibited high proton conductivity at high temperature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1967–1978, 2006     

A MEMS-Based Piezoelectric Power Generator for Low Frequency Vibration Energy Harvesting

A novel power generator has been achieved to convert vibration to electrical energy via the piezoelectric effect. The generator obtained by micro fabrication process mainly consists of silicon based frame and composite cantilever. The prototype tested at resonant vibration generates 1.15μW of effective power to a 20.4-kΩ resistance load. The potential of this work is to offer miniaturization solutions for power generators, and with the proposed method the ambient ubiquitous vibration can be harvested effectively as endless energy source to form an integrated self-powering system.     

超高真空中银表面垂直谐波电流的实验测量

在超高真空的条件下,测量了清洁、自由银表面产生的光学二次谐波随基波电矢量与入射面之间夹角(?)的变化,从而通过理论公式,求得由Rudnick和Stern引入的,用于衡量垂直面电流密度的唯象参数a的值,在入射基频光波长为1.064μm时,被测定为-4.0±0.8.     

一种由[Ag(CN)2]-和Mn(Ⅱ)建筑块组装的三个三维网穿插的超分子配合物的结构和荧光性质

0 Introduction Recently, a considerable effort on crystal engi- neering has been devoted to the research of supramolecular assemblies because they show abun- dant topologic structures and offer possibilities for po- tential applications of functional mate…     

蛋白质—四氯苯醌荷移反应的分光光度研究

本文用分光光度法研究了蛋白质—四氯苯醌荷移反应。通过对影响反应各因素的研究,确立了以四氯苯醌形成荷移络合物的方法测定蛋白质的最佳条件,测定了最大结合数及反应平衡常数。     

糖蛋白/胆红素钙水溶性复合物的形成及光谱研究

采用傅立叶变换红外光谱(FT-IR)，结合减法、二阶导、退卷积和曲线拟合等先进光谱技术，紫外可见光谱，ICP-AES分析方法，对不同质量比的α-酸性糖蛋白(AGP)和胆红素钙(CaBR)反应后的滤液进行了研究。结果表明，AGP和CaBR之间存在着较强的相互作用，导致AGP二级结构的有序性增加，CaBR的水溶性增大，两者形成了可溶性的AGP/CaBR复合物。