On-line sorbent extraction, preconcentration and determination of lead by atomic absorption spectrometry

A method for the quantitative preconcentration of lead based on an existing batch process was developed for implementation in a flow system including a flame AAS detector. Lead can be quantitatively preconcentrated as pyrrolidinedithiocarbamate or dithizonate on an activated carbon minicolumn. The chelates are eluted in methyl isobutyl ketone and introduced directly into the nebuliser-burner. An enrichment factor of 50 is typically obtained for a preconcentration time of 2 min (lead can be determined at concentrations between 15 and 400 ng/ml), which results in a throughput of ca. 25 samples per hr. The sensitivity achieved with the two reagents is similar, but the selectivity provided by APDC exceeds that of dithizone. Based on the results obtained in the determination of lead in reference materials (minerals and skim milk), the proposed APDC method is applicable to real samples.     

Hybridization in some macrocyclic polyacetylenes

The hybridization in several cyclic polyacetylene compounds has been calculated by the maximum overlap method, assuming planar and non-planar geometries of the molecules. In the planar configuration the hybrids describing the molecular skeleton deviate from the corresponding bond directions. We have a few “bent” bonds, but in contrast to the situation in small rings, here the deviation angles are negative, i.e., the hybrids point toward the inside of the ring. Non-planar structures in which acetylene groups are kept in a plane and CCH₂ or CH₂ groups are displaced out of the plane show less deviation from the bond directions of bent bonds. Furthermore, the deviation angles decrease with an increase in the out-of-plane displacement of methylene groups. Finally, when the angle of bending of the molecules approaches 50°, the deviation vanishes, predicting a puckered conformation for the molecules. Correlation between CC stretching vibration frequencies and the corresponding CC bond overlap is discussed.     

Delphinidin–Aluminum(III) Complexes in Aqueous and Non-Aqueous Media: Spectroscopic Characterization and Theoretical Study

Summary. The study of delphinidin complexation with trivalent aluminum in acidic aqueous buffered (pH 3.0 and 3.8) and methanolic solutions was performed utilizing electronic absorption spectroscopy and quantum chemical calculations. In its structure delphinidin possesses several chelating sites in competition towards aluminum(III). Molar ratio plots denoted the formation of only one aluminum(III):delphinidin complex of stoichiometry of 1:1 in both investigated media. Semiempirical calculations, performed at the restricted HF AM1 level, enabled the determination of the structural features of free delphinidin and structural modifications caused by chelation of aluminum(III). Considering the pigment molecular structure and the results of the theoretical calculations it is possible to equally implicate C3′–C4′ and C4′–C5′ hydroxyl groups as those with the predominant chelating power.     

Aromatic substitution

It is demonstrated that a previously developed topological expression for the total π-electron energy of aromatic molecules provides a good qualitative account of localization energies. The logarithm of the ratio of the algebraic structure counts for the ground state and the localized reaction intermediate is the principle energy determining factor. This expression fails for hydrocarbons with unusually small HOMO-LUMO separations. An alternative topological expression that includes a correction for this situation provides an excellent non-empirical explanation for the successful empirical use of Dewar reactivity numbers in correlating exact localization energies. The present analysis provides an explanation for the success of the traditional resonance structure counting technique in predicting relative rates of aromatic substitution. The analysis develop applied only to alternant hydrocarbons.     

Solvent‐free microwave synthesis of bis‐pyrazolo[3,4‐b:4′,3′‐e]‐pyridines and study of their antifungal properties

The synthesis of a series of bis‐pyrazolo[3,4‐b:4′,3′‐e]pyridines ( 3 ) in the reaction of 5‐amino‐3‐methyl‐1‐phenylpyrazole ( 1 ) with aldehydes ( 2 ) under microwave irradiation and solvent‐free conditions is described. The structure elucidation of the products is based on detailed nmr analysis of experiments such as ¹H‐COSY, NOESY, DEPT, HSQC and HMBC. These compounds showed moderate antifungal in vitro activity against dermatophytes.     

Interactions of silver halide sols with hydrolyzed hafnium species

Summary Coagulation and reversal of charge effects of freshly prepared and heated solutions of hafnium tetrachloride have been studied as a function of the p_H using aged silver halide sols and solsin statu nascendi. It was shown that the critical coagulation concentration and the critical stabilization concentration (due to charge reversal) increased with increasing p_H. These observations have been related to the hydrolysis of the hafnium ion. At p_H values above 4 essentially the entire amount of hafnium is present in the form of the neutral soluble, species Hf(OH)₄. This accounts for the inability of the hafnium solutions to reverse the charge of the sols at higher p_H values. The adsorption measurements carried out with the aid of the radioactive isotope¹⁸¹Hf showed that the neutral hydrolyzed species are strongly adsorbed on negatively charged silver iodide particles. The adsorbed amounts of hafnium on a AgI sol are considerably larger than in the case of charged hydrolyzed ions (such as hydrolyzed thorium ions) on a similar sol. This is explained by the ability of the neutral hafnium species, Hf(OH)₄. to form a close-packed adsorbed layer. The results confirm previous findings that the enhanced adsorption of hydrolyzed ions is caused by the presence of the hydroxyl group, whereas the ionic charge plays a negligible role in this case.

---

Zusammenfassung Die Koagulations- und Umladungserscheinungen von frisch dargestellten und durch Erwärmung gealterten Lösungen von Hafniumchlorid wurden an Silberhalogenid-Solen in der Abhängigkeit vom p_H untersucht. Es wurde festgestellt, daß die kritische Koagulationskonzentration und die kritische Stabilisationskonzentration (die Umladungsgrenze) mit steigendem p_H höher werden. Diese Beobachtungen wurden durch die Hydrolyse des Hafnium-Ions erklärt. Wenn p_H>4 ist, bestcht nahezu die ganze Menge von Hafnium als neutrale, gelöste Hf(OH)₄ Moleküle. Damit wird es erklärt, daß die Silberhalogenid-Teilchen bei höheren p_H-Werten durch Hafniumsalze nicht umgeladen werden können. Die mittels des radioaktiven Isotopen¹⁸¹Hf durchgeführten Messungen zeigten, daß die neutralen Hf(OH)₄ — Moleküle stark an den negativ geladenen Silberjodid-Teilchen adsorbiert sind. Die adsorbierte Menge per Mol von AgI ist beträchtlich größer als die Menge der geladenen, hydrolysierten Ionen (wie z. B. ThOH³⁺), die an dem gleichen Sol bestimmt wurde. Dieser Effekt ist leicht erklärt, da man mit den neutralen adsorbierten Molekülen eine fest gepackte Adsorptionsschicht bilden kann. Diese Resultate bestätigen die früheren Befindungen, daß die höhere Adsorptionsfähigkeit der hydrolysierten Ionen durch die Hydroxylgruppe verursacht wird, während die Ionenladung eine zu vernachlässigende Rolle spielt.

---

---

Supported by the U.S. Army Research Office (Durham), Grant No. DA-ARO (D)-31-124-G 656.

---

Part of a PhD Thesis byL. J. Stryker, supported by a NASA Traineeship.     

Creatinine biosensor based on ammonium ion selective electrode and its application in flow-injection analysis

A new, highly sensitive, fast responding and stable potentiometric biosensor for creatinine determination is developed. The biosensor is based on an ammonium ion-selective electrode. Creatinine deiminase (EC 3.5.4.21) is chemically immobilized on the surface of the polymeric ion-sensitive membrane in the form of monomolecular layer using a simple, one-step carbodiimide covalent attachment method. The resulting enzyme electrodes are useful for measurement under flow injection analysis (FIA) conditions. The biosensors exhibit excellent operational and storage stability. The enzyme electrodes retain over 70% of initial sensitivity after ten weeks of work under FIA conditions. The storage stability at 4 °C is longer than half a year without loss of sensitivity. Under optimized conditions near 30 samples per hour can be analyzed and the determination range (0.02-20.0 mmol l⁻¹) fully covers creatinine concentrations important from clinical and biomedical point of view. The simple biosensor/FIA system has been successfully used for determination of creatinine in urine, serum and posthemodialysate samples.     

Enzyme catalysis in organic solvents: a promising field for optical biosensing

The ability of enzymes to work in non-aqueous media offers new and almost unexploited possibilities for the development of new optical biosensors. The advantages of performing biocatalytic reactions in non-aqueous media are discussed in relation to their possible application in optical biosensor design. Attention is focused on the factors that influence enzymatic catalysis in organic solvents, including the role of enzyme-associated water, criteria for solvent selection and the alteration of enzyme specificity. Recent examples of relevant applications and future prospects of organic-phase optical biosensing are discussed.     

Sections and projections of nested convex bodies

Aequationes mathematicae - One of the most important problems in Geometric Tomography is to establish properties of a given convex body if we know some properties over its sections or its...