Synthesis and characterization of surface-cyanofunctionalized poly (N-isopropylacrylamide) latexes

 A series of P[N-isopropylacrylamide (NIPAM)] latexes with different contents of cyano groups were successfully prepared by either seeded or shot-growth polymerizations of an aqueous solution containing acrylonitrile (AN) onto a seed P[NIPAM] latex, respectively, and further characterized by FT-IR, ¹H-NMR, elemental analysis, as well as by quasielastic light scattering (QELS) and scanning electron microscopy (SEM). All prepared surface-cyanofunctionalized P[NIPAM] latexes exhibited the same range of lower critical solution temperature (LCST) as a pure P[NIPAM] latex. The shot polymerization process proved more efficient at yielding cyano derivatized latexes than the seeded polymerization technique. The amount of incorporated cyano groups onto the particles was determined with a good correlation both by ¹H-NMR and elemental analysis. The higher the amount of initially introduced AN monomer in the reaction mixture, the more cyano groups were incorporated onto the particles. The surface of the particles with high content of cyano groups appeared quite rough by SEM in comparison with that of the pure P[NIPAM] particles. Received: 25 February 1998 Accepted: 23 June 1998     

Tris(2,2''''-bipyridyl)ruthenium(Ⅱ) electrochemiluminescence (ECL) enhanced by rutin on platinum electrode

Ru(bpy)_(3~(2 )) electrochemiluminescence (ECL) was applied to determination of rutin. ECL intensity of Ru(bpy)_(3~(2 ))could be enhanced in the presence of rutin in basic solution on platinum electrode. At pH 9.9, light emission intensity was found to be linear with rutin in the range of 1-50 mmol/L.     

Path integrals on half-line

In the framework of path integrals we present a solution to the Schrödinger equation for a free particle confined to the half-linex > 0. A solution in question corresponds to the boundary condition (/x) (0,t)= (0,t) where is a real constant.     

Synthesis of gramicidin S and its analogues via an on-resin macrolactamization assisted by a predisposed conformation of the linear precursors

A simple and efficient preparation of gramicidin S and its analogues is described. It involves solid-phase peptide synthesis and on-resin macrolactamization without side chain protection, affording cyclic products in high yield and high purity. The high specificity of the cyclization reaction was shown to originate in the formation of a pre-organized conformation of the linear biosynthetic precursor of gramicidin S. This facile method will provide convenient access to the analogues of the natural product for functional optimization to counter microbial resistance.     

相转移催化合成对甲氧基肉桂酸-2-乙基己酯的研究

对甲氧基肉桂酸 2 乙基己酯是一种有效的ＵＶＢ防晒剂[1 ,2 ] ,一般采用Ｃｌａｉｓｅｎ Ｓｃｈｍｉｄｔ缩合反应制得[3] ,但由于催化剂ＫＯＨ处于水相 ,对反应物不能充分起到催化作用导致产率较低[4] 。我们利用乙二醇 (ＰＥＧ)为相转移催化剂合成立体专一的反式对甲氧基肉桂酸 2 乙基己酯 ,产率提高到 72 .5 %。合成路线如下 :1　实验部分1 .1　仪器与试剂ＢＩＯ ＲＡＰＦＴ45 0红外光谱仪 ,用液膜法测试 ;Ｂｒｕｒｅｒ ＡＭ 30 0超导核磁共振仪 (溶剂ＤＣ Ｃｌ3) ;ＭＡＴ/44Ｓ ,ＧＣ ＭＳ型色质联用谱仪 ;试剂均为分析纯 ,上海化学试剂…     

钴膦簇合物的催化环丙烷化反应

本文首次利用碳基钴簇合物ＰｈＰＣｏ_３（ＣＯ）_９催化剂，在常压和－２０℃－０℃，用苯乙烯和重氮乙酸乙酯进行环丙烷化反应，合成了菊酸酯，重氮乙酸乙酯可全部转化，酯的选择性可达８５％。产物经减压分馏后，由ＩＲ和￣１ＨＮＭＲ分析，确证了产物为菊酸酯，表明了羰基钴簇合物对苯乙烯的环丙烷化反应有良好的催化性能，为四面体异核簇合物用于不对称催化反应打下了基础。     

WxC-MCM-48催化剂的合成、表征及加氢脱硫催化性能

以正硅酸乙酯(TEOS)为硅源，十六烷基三甲基溴化铵(CTAB)为表面活性剂，仲钨酸铵为钨源，采用水热晶化法一步合成了不同钨含量(以Si、W物质的量比n_Si/n_W表示)的WO₃-MCM-48，然后经甲烷/氢气(V/V=1/4)混和气体程序升温还原碳化(TPC)，制备出了W_xC-MCM-48(x=1、2)催化剂，采用XRD、N₂吸附-脱附和NH₃-TPD对样品的结构进行了表征，用噻吩作为模型化合物，对W_xC-MCM-48催化剂的加氢脱硫催化活性进行了评价。结果表明，在一定钨含量的条件下，WO₃-MCM-48和W_xC-MCM-48样品仍然保持MCM-48的三维立方有序介孔结构，n_Si/n_W=30～15时，碳化钨的物相为W₂C；n_Si/n_W=7.5时，碳化钨为W₂C和WC物相，W_xC-MCM-48催化剂表现出了良好的加氢脱硫催化性能。     

Facile generation of platinum(IV) compounds with mixed labile moieties. Hydrogen peroxide oxidation of platinum(II) to platinum(IV) compounds

Hydrogen peroxide oxidation of platinum(II) compounds containing labile groups such as Cl, OH, and alkene moieties has been carried out and the products characterized. The reactions of [Pt^II (X)₂ (N–N)] (X = Cl, OH, X₂ = isopropylidenemalorate (ipm); N–N 2,2-dimethyl-1,3-propanediamine [(dmpda), N-isopropyl-1,3-propanediamine (ippda)] with hydrogen peroxide in an appropriate solvent at room temperature affords [Pt^IV (OH)(Y)(X)₂(N–N)] (Y = OH, OCH₃). The crystal structures of [Pt^IV(OH)(OCH₃)(Cl)₂(dmpda)]·2H₂O (P-1 bar, a = 6.339(2) Å , b = 9.861(1) Å, c = 11.561(1) Å, a = 92.078(9)°, β = 104.78(1)°, γ=100.54(1)°, V = 684.3(2) ų, Z = 2R = 0.0503) and [Pt^IV(OH)₂(ipm)(ippda)]·3H₂O (C 2/c, a = 27.275(6) Å, b=6.954(2) Å, c = 22.331(4) Å, β = 118.30(2)°, V = 3729(2) ų, Z = 8, R = 0.0345) have been solved and refined. The local geometry around the platinum(IV) atom approximates to a typical octahedral arrangement with two added groups (OH and OCH₃; OH and OH) in a transposition. The platinum(IV) compounds with potential labile moieties may be important intermediate species for further reactions.     

A Rapid and Convenient Synthesis of Derivatives of Imidazoles under Microwave Irradiation

An efficient and a quick microwave‐assisted synthesis of benzimidazoles and trisubstituted imidazoles was developed. Three benzimidazoles were obtained as a result of the condensation of 1,2‐phenylenediamine with carboxylic acids and acetoacetic ester without catalyst. A series of trisubstituted imidazoles were synthesized by condensation of benzil, aromatic aldehyde and ammonium acetate in the presence of glacial acetic acid.     

Diagramme de phases du systeme binaire LiNO3-NaNO3

Phase diagram of the binary system LiNO₃-NaNO₃ has been obtained by using direct and differential thermal analysis between 323 and 623 K. This system is characterized by an eutectic plateau at 467 K. The eutectic point is at 0.465 mole NaNO₃. A peritectic appears at 550 K. There is no miscibility in the solid state. These findings associated with some other thermodynamic results have been used to calculate the activities of the constituents along the liquids curve and the excess thermodynamic functions at 618 K. The constituents seem not to have a symmetrical influence on the thermodynamic quantities.