研究类氦原子基态能量的参数微扰法

考虑了类氦原子中电子对核的屏蔽效应,建立了含有屏蔽效应参数的哈密顿算符,并应用微扰理论研究了类氦原子基态能量.通过参数微扰法计算的类氦原子一级近似基态能量与变分法得到的能量完全相同,比无参数微扰法计算的能量更加接近实验值.参数微扰法为研究多电子原子能级和原子能级精细结构提供了一种新的方法.     

基于语义的软件服务故障自动诊断模型

模仿学习是机器人仿生机制研究的主要内容之一,即通过观察、理解、学习、模仿示教行为实现机器人的仿生特性。基于高斯过程分别表达采集离散示教信号所构成的示教轨迹和含有未知参数策略的模仿轨迹,构建模仿学习方法框架,将概率模型匹配引入到模仿学习中,以KL散度为代价函数比较两种轨迹的概率分布,运用梯度下降法寻求使KL散度最小的最优模仿控制策略,将策略应用于模仿机器人以完成与示教相同的模仿任务。以关节型机器人的机械臂摆动行为模仿为学习任务进行仿真,结果表明基于概率轨迹匹配的模仿学习方法能够实现机械臂摆动行为模仿,学习过程较传统方法简易且学习效果较好。     

Facile Preparation of α‐Zirconium Phosphate/Polyaniline Hybrid Film for Detecting Potassium Ion in a Wide Linear Range

A novel α‐zirconium phosphate/polyaniline (α‐ZrP/PANI) hybrid film used as K⁺ ion sensor was fabricated on carbon paper by electrochemical method. Mechanisms of film formation and detection of K⁺ ions were also proposed. The exfoliated α‐ZrP was mixed with PANI and deposited on carbon paper. The resultant α‐ZrP/PANI film exhibited a good current response to K⁺ ion with different concentrations. It also showed a wide logarithmic linear response in detecting K⁺ ions in the ranges of 10^?8–10^?4 M and 10^?4–10^?2 M, respectively. The results can be attributed to the synergetic effect of α‐ZrP and PANI.     

用于组胺检测的MWCNT/ZnO/Nafion复合物膜修饰的电化学发光传感器的研究

基于含有氨基类物质对三联吡啶钌电化学发光的促进作用,建立了直接测定组胺的电化学发光方法。通过MWCNT/ZnO/Nafion复合物膜修饰玻碳电极(GC)固定三联吡啶钌,研究了此工作电极在组胺溶液中的ECL发光行为。在最优的实验条件下,组胺质量浓度在1.0~1.0×104ng/mL范围内时其对数值与电化学发光信号呈良好的线性关系(R2=0.9968),检出限为0.64 ng/mL,组胺的加标回收率为96%~103%,RSD为2.7%。     

Ag~+型配位树脂的制备及对FK506分离纯化的研究

将HZM-3大孔树脂磺化,动态法载银依次获得Ag+-1#、Ag+-2#、Ag+-3#、Ag+-4#、Ag+-5#共5种Ag+型配位树脂,通过它们对FK506的静态吸附与解吸实验优选出了Ag+-3#树脂,其吸附率为77%,解吸率为92%;Ag+-3#树脂与FK506形成络合物的稳定性受溶液极性的影响,在室温下的静态吸附曲线表明,其对FK506的配位吸附符合Langmuir单分子层吸附模型;Ag+-3#树脂配位层析分离FK506,当甲醇:乙酸乙酯(V/V)=50:50,上样量为8mg/m L,流速为1BV/h时,可在4.5倍柱体积内完成整个分离过程,合并不含类似物的收集液,浓缩后在HPLC上检测纯度为98.83%,收率为87.35%,无类似物FK520与2H-FK506检出;乙醇结晶最终产品的纯度达到99.6%以上,样品经过ICP-AES检测,在其检测限内未检测出Ag+。     

Quantum Dots for Display Applications

This article offers a materials-chemistry perspective for colloidal quantum dots (QDs) in the field of display, including QD-enhanced liquid-crystal-display (QD-LCD) and QD-based light-emitting-diodes (QLEDs) display. The rapid successes of QDs for display in the past five years are not accidental but have a deep root in both maturity of their synthetic chemistry and their unique chemical, optical, and optoelectronic properties. This article intends to discuss the natural match of QD emitters for display and chemical means to eventually bring about their full potential.     

SO_4~(2-)功能化处理对Fe_2O_3催化剂上氨选择性催化还原NO_x性能的促进机理研究

采用沉淀法制备了Fe(OH)_3和Fe_2O_3。通过硫酸化处理得到SO_4~(2-)/Fe(OH)_3和SO_4~(2-)/Fe_2O_3两种催化剂,并将其应用于氨选择性催化还原NO_x(NH_3-SCR)反应,研究了SO_4~(2-)功能化处理对Fe_2O_3催化剂上NH_3-SCR脱硝性能的促进机理。结果表明,与纯的Fe_2O_3相比,硫酸化处理得到的催化剂上SCR活性得到显著提升;其中,SO_4~(2-)/Fe(OH)_3表现出更加优异的催化性能,在250-450℃时NO_x转化率高于80%,且具有优异的稳定性和抗H_2O+SO_2性能。XRD、Raman、TG、FT-IR、H_2-TPR、NH_3-TPD和in situ DRIFTS等表征结果显示,硫酸功能化处理能抑制Fe_2O_3的晶粒生长,同时SO_4~(2-)与Fe~(3+)结合形成硫酸盐复合物,提高了催化剂表面酸性位点的数量和酸强度,抑制了Fe_2O_3上的氨氧化反应,从而提高了其脱硝催化性能。     

Designing Sub‐2 nm Organosilica Nanohybrids for Far‐Field Super‐Resolution Imaging

Stimulated emission depletion (STED) microscopy enables ultrastructural imaging of biological samples with high spatiotemporal resolution. STED nanoprobes based on fluorescent organosilica nanohybrids featuring sub‐2 nm size and near‐unity quantum yield are presented. The spin–orbit coupling (SOC) of heavy‐atom‐rich organic fluorophores is mitigated through a silane‐molecule‐mediated condensation/dehalogenation process, resulting in bright fluorescent organosilica nanohybrids with multiple emitters in one hybrid nanodot. When harnessed as STED nanoprobes, these fluorescent nanohybrids show intense photoluminescence, high biocompatibility, and long‐term photostability. Taking advantage of the low‐power excitation (0.5 μW), prolonged singlet‐state lifetime, and negligible depletion‐induced re‐excitation, these STED nanohybrids present high depletion efficiency (>96 %), extremely low saturation intensity (0.54 mW, ca. 0.188 MW cm^?2), and ultra‐high lateral resolution (ca. λ_em/28).     

Quantitative Design of Bright Fluorophores and AIEgens by the Accurate Prediction of Twisted Intramolecular Charge Transfer (TICT)

Inhibition of TICT can significantly increase the brightness of fluorescent materials. Accurate prediction of TICT is thus critical for the quantitative design of high‐performance fluorophores and AIEgens. TICT of 14 types of popular organic fluorophores were modeled with time‐dependent density functional theory (TD‐DFT). A reliable and generalizable computational approach for modeling TICT formations was established. To demonstrate the prediction power of our approach, we quantitatively designed a boron dipyrromethene (BODIPY)‐based AIEgen which exhibits (almost) barrierless TICT rotations in monomers. Subsequent experiments validated our molecular design and showed that the aggregation of this compound turns on bright emissions with ca. 27‐fold fluorescence enhancement, as TICT formation is inhibited in molecular aggregates.