微分脉冲溶出伏安法同时测定食品中的锌铁锰

在1％乙二胺-0．1mol／L酒石酸钠-pH11．82 Britton—Robinson缓冲溶液体系中用微分脉冲溶出伏安法同时测定锌、铁、锰三种微量元素。它们的峰电位分别为-1184，-1392和-1456mV(vs．Ag/AgCl)；线性范围分别为：0.001—0.015，0．005—0．05和0．04—0．7μg／mL，最低检出浓度分别为0．0007，0．0014和0．0193μg／mL。本法操作简便、准确、灵敏度较高，用于食品中这三种元素的分析，结果令人满意。     

Effects of Post-Thermal Treatment on Quality of SiC Grown by PVT Method

We report the effects of post-thermal treatment on the quality of 2-inch 6H-SiC wafer cut from a crystal boule grown by physical vapour transportation method. The full widths at half maximum of x-ray diffraction rocking curves measured on sites across the 2-inch wafer become narrower, indicating the quality improvement after a three-step post-thermal treatment. It is found that the most common defects such as micropipes and inclusions can be significantly reduced after the treatment. Our results show that the post-thermal treatment is an effective route to improve the quality of SiC single crystals.     

造纸污泥与废水污泥流化床焚烧时NO_x和SO_2的排放特性研究

1前言流化床焚烧污犯是近年来发达国家广泛采用的方法，它能很好地实现污泥的稳定化、无害化、减容化和资源化处理。燃煤流化床锅炉污染物排放方面已做了大量的研究工作，由于污泥与煤在结构和性质方面的差异较大，因此有必要对流化床焚烧污泥时污染物排放特性进行研究。本文详细研究了造纸、废水污泥在流化床中焚烧时污泥水份、运行床温及过量空气对NO。和SO。的排放特性及污泥N－＋NO。、S－SO。的转化率的影响，并对这两种性质差异较大的污泥焚烧时的NO。和502的生成特性进行了对比分析，取得了许多有价值的结果，为污泥流化床焚烧…     

Interference Diagnosis of the Initial Stage of Laser-Produced-Plasma in Air

By using a Q-switched YAG Laser and a optical path delay set-up, we study the process in whith a laser induces breakdown to produce plasma in air, and obtain time-resolved Mach-Zehnder interferograms and optical shadowgrams of the initial stage of the plasma and the expansion wave produced in the process for the first time     

Design and Fabrication of 1.06 μm Resonant-Cavity Enhanced Reflective Modulator with GaInAs/GaAs Quantum Wells

A resonant-cavity enhanced reflective optical modulator is designed and fabricated, with three groups of three highly strained InGaAs/GaAs quantum wells in the cavity, for low voltage and high contrast ratio operation. The quantum wells are positioned in antinodes of the optical standing wave. The modulator is grown in a single growth step in an molecular beam epitaxy system, using GaAs/AlAs distributed Bragg reflectors as both the top and bottom mirrors. Results show that the reflection device has a modulation extinction of 3 dB at -4.5 V bias.     

表面垂直裂痕诱发瑞利波散射的数值分析

激光激发的声表面波为材料表面缺陷的检测提供了有力的工具.针对含缺陷材料在模型边界上的复杂性,建立了基于平面应变的有限元模型并选取了相同厚度但含有不同深度的表面裂痕的单层铝板进行了对比计算,得到了声表面波经过不同深度的表面裂痕时产生的反射及透射信号波形的时域特征.进而引入了基于Wigner-Ville分布理论的时-频分析方法计算裂痕前、后散射的瞬态表面波的能量在时间-频率平面内分布的情形.结果显示：声表面波接近中心频率的某一频率成分在经过深度小于其中心波长的表面缺陷时,随着裂痕深度的增加,对应于该频率的反射系数呈现单调递增的趋势;而透射系数呈现递减的特征,这一结果可以为激光超声检测表面缺陷提供一种定量的表征手段.     

Banach空间中广义拟变分包含解的存在与逼近

研究了Banach空间中含k-次增生映射和φ-强增生映射的一类无紧性条件的广义拟变分包含解的存在惟一性与逼近问题，给出了一新的迭代算法和具混合误差的ishikawa迭代序列强收敛到变分包含解的充要条件，所得的结果改进和推广了近期许多相关结果．     

Effect of Bias Step on the I-V Curve in Double-Barrier AlGaAs/GaAs/AlGaAs Resonant-Tunnelling Devices

We investigate the non-equilibrium electron transport properties of double-barrier AlGaAs/GaAs/AlGaAs resonant- tunnelling devices in nonlinear bias using the time-dependent simulation technique. It is found that the bias step of the external bias voltage applied on the device has an important effect on the final current-voltage （I - V） curves. The results show that different bias step applied on the device can change the bistability, hysteresis and current plateau structure of the I - V curve. The current plateau occurs only in the case of small bias step. As the bias step increases, this plateau structure disappears.     

软X射线显微术Si_3N_4薄膜窗口的研制

介绍了在软Ｘ－射线显微术研究领域中有重要应用的Ｓｉ_３Ｎ_４薄膜窗口的实验室制作方法，并形成一套独特制备工艺，Ｓｉ_３Ｎ_４薄膜窗口的研制成功推动了我国软Ｘ射线显微术研究的发展。     

高分子在生物工程中的应用进展

在生物工程中所用的高分子材料一般统称为高分子生物材料,其涉及的范围很广。医用高分子是其中很重要的一类,另一类就是在生物技术中所用的高分子材料。对于高分子生物材料可根据其材料性质进行分类,也可按使用范围进行分类。如体内应用的材料,半体内应用的材料和体外应用的材料。本文着重介绍了抗凝血材料、药用高分子材料及应用于生物技术中高分子材料的研究进展,并总结分析了这几个研究领域中的发展趋势。