AlNxOy thin films deposited by DC reactive magnetron sputtering

AlN_xO_y thin films were produced by DC reactive magnetron sputtering, using an atmosphere of argon and a reactive gas mixture of nitrogen and oxygen, for a wide range of partial pressures of reactive gas. During the deposition, the discharge current was kept constant and the discharge parameters were monitored. The deposition rate, chemical composition, morphology, structure and electrical resistivity of the coatings are strongly correlated with discharge parameters. Varying the reactive gas mixture partial pressure, the film properties change gradually from metallic-like films, for low reactive gas partial pressures, to stoichiometric amorphous Al₂O₃ insulator films, at high pressures. For intermediate reactive gas pressures, sub-stoichiometric AlN_xO_y films were obtained, with the electrical resistivity of the films increasing with the non-metallic/metallic ratio.     

Complex Geometry and Dirac Equation

Complex geometry represents a fundamentalingredient in the formulation of the Dirac equation bythe Clifford algebra. The choice of appropriate complexgeometries is strictly related to the geometricinterpretation of the complex imaginary unit . We discuss two possibilities which appearin the multivector algebra approach: the₁₂₃ and ₂₁ complexgeometries. Our formalism provides a set of rules which allows an immediate translation between thecomplex standard Dirac theory and its version withingeometric algebra. The problem concerning a doublegeometric interpretation for the complex imaginary unit is also discussed.     

Dark channels in resonant tunneling transport through artificial atoms

We investigate sequential tunneling through a multilevel quantum dot confining multiple electrons in the regime where several channels are available for transport within the bias window. By analyzing solutions to the master equations of the reduced density matrix, we give general conditions on when the presence of a second transport channel in the bias window quenches transport through the quantum dot. These conditions are in terms of distinct tunneling anisotropies which may aid in explaining the occurrence of negative differential conductance in quantum dots in the nonlinear regime.     

Determination of citric acid in soft drinks using flow injection with potentiometric detection

A flow injection analysis (FIA) system with potentiometric detection has been developed for the determination of citric acid in commercial fruit juices using a copper-selective tubular electrode. It consists of the complexation of citrate ion with copper (II) ion, monitoring the free copper (II) concentration. Linear relationships between the potential and log concentrations of citric acid in the range of 1 × 10^–3 mol/L – 1 × 10^–2 mol/L were attained with samples injected in the system without prior treatment. Repeatability was determined by assessing the relative standard deviation for ten replicate injections of different juice samples which varied from 1.2% to 3.0%. The results provided by the automated system were compared with those of an enzymatic conventional method used for the analysis of citric acid in food and a relative deviation of less than 4.0% was found. Recovery trials resulted in values from 97.0% to 101.0%. The system allows a sampling frequency of 60 samples/h.     

Identification of alkyl carbazoles and alkyl benzocarbazoles in Brazilian petroleum derivatives

The present work describes (a) the identification and characterization of an impurity, 2,4,5,7-tetrabromo-6-hydroxy-9-(2,3,4,5-tetrachlorophenyl)-3H-xanthen-3-one (BCPX), in the color additives D&C Red Nos. 27 and 28 (phloxine B) and (b) the determination of the extent and level of BCPX contamination in certified lots of these colors. For these purposes, BCPX (a compound not previously reported in the literature) was synthetically prepared. Test portions from 42 certified lots of D&C Red Nos. 27, 28 and 27 lakes were analyzed for BCPX using an HPLC method that included gradient elution and UV-vis photodiode array detection. Those lots were submitted for certification by both domestic (six) and foreign (six) manufacturers during the past 4 years. Of the test portions analyzed, 32 (76.2%) contained BCPX in amounts ranging from 0.01 to 3.21%. The remaining 10 test portions (23.8%) contained no detectable BCPX or less than 0.008%, which is the limit of quantification for the present method. The analyses revealed substantial differences in the level of BCPX across different manufacturers. The wide range of BCPX levels found in the analyzed lots suggests that the presence of BCPX in D&C Red Nos. 27 and 28 may be avoided or significantly reduced during the manufacturing process.     

The Stille reaction in the synthesis of the C37-norcarotenoid butenolide pyrrhoxanthin. Scope and limitations

The sequential Stille cross-coupling reactions of the dihalogenated gamma-alkylidenebutenolide 7 with stannanes 9 and 6 afforded the carbon skeleton of pyrrhoxanthin, a highly functionalized C7'-C8' acetylenic C37-norcarotenoid butenolide. Although the first halogen-selective Stille coupling takes place in 90% yield at ambient temperature, double isomerization of the Z,E- to the E,Z-C7'-C10' enyne, likely induced by the catalyst, accompanyied the bond formation, leading to 9'Z-20 and, ultimately, to 9'Z-pyrrhoxanthin 9'Z-1.     

Kinetics and thermodynamics of chlorpromazine interaction with lipid bilayers: effect of charge and cholesterol

Passive transport across cell membranes is the major route for the permeation of xenobiotics through tight endothelia such as the blood–brain barrier. The rate of passive permeation through lipid bilayers for a given drug is therefore a critical step in the prediction of its pharmacodynamics. We describe a detailed study on the kinetics and thermodynamics for the interaction of chlorpromazine (CPZ), an antipsychotic drug used in the treatment of schizophrenia, with neutral and negatively charged lipid bilayers. Isothermal titration calorimetry was used to study the partition and translocation of CPZ in lipid membranes composed of pure POPC, POPC:POPS (9:1), and POPC:Chol:POPS (6:3:1). The membrane charge due to the presence of POPS as well as the additional charge resulting from the introduction of CPZ in the membrane were taken into account, allowing the calculation of the intrinsic partition coefficients (K(P)) and the enthalpy change (ΔH) associated with the process. The enthalpy change upon partition to all lipid bilayers studied is negative, but a significant entropy contribution was also observed for partition to the neutral membrane. Because of the positive charge of CPZ, the presence of negatively charged lipids in the bilayer increases both the observed amount of CPZ that partitions to the membrane (KP(obs)) and the magnitude of ΔH. However, when the electrostatic effects are discounted, the intrinsic partition coefficient was smaller, indicating that the hydrophobic contribution was less significant for the negatively charged membrane. The presence of cholesterol strongly decreases the affinity of CPZ for the bilayer in terms of both the amount of CPZ that associates with the membrane and the interaction enthalpy. A quantitative characterization of the rate of CPZ translocation through membranes composed of pure POPC and POPC:POPS (9:1) was also performed using an innovative methodology developed in this work based on the kinetics of the heat evolved due to the interaction of CPZ with the membranes.     

Magnetic properties of nanoscale crystalline maghemite obtained by a new synthetic route

In this work we describe the synthesis and characterization of maghemite nanoparticles obtained by a new synthetic route. The material was synthesized using triethylamine as a coprecipitation agent in the presence of the organic ligand N,N′-bis(3,5-di-tert-butyl-catechol)-2,4-diaminotoluene (LCH₃). Mössbauer spectrum at 4 K shows typical hyperfine parameters of maghemite and Transmission Electron Microscopy images reveal that the nanoparticles have a mean diameter of 3.9 nm and a narrow size distribution. AC magnetic susceptibility in zero field presents an Arrhenius behavior with unreasonable relaxation parameters due to the strong influence of dipolar interaction. In contrast when the measurements are performed in a 1 kOe field, the effect of dipolar interactions becomes negligible and the obtained parameters are in good agreement with the static magnetic properties. The dynamic energy barrier obtained from the AC susceptibility results is larger than the expected from the average size observed by HRTEM results, evidencing the strong influence of the surface contribution to the anisotropy.