High-frequency characteristics of CoFeVAlONb thin films

High-frequency characteristics of CoFeVAlONb thin films were studied. A thin film of Co_43.47Fe_35.30V_1.54Al_5.55O_9.93Nb_4.21 is observed to exhibit excellent magnetic properties; magnetic coercivity of 1.24 Oe, uniaxial in-plane anisotropy field of 66.99 Oe, and saturation magnetization of 19.8 kG. The effective permeability of the film is as high as 1089 and is stable up to 1.8 GHz, and with ferromagnetic resonance over 3 GHz. This film also has very high electrical resistivity of about 628 μΩ cm. These superior properties make it ideal for high-frequency magnetic applications.     

Texture and electronic activity of grain boundaries in Cu(In,Ga)Se2 thin films

The influence of different film textures on the electronic properties of polycrystalline Cu(In,Ga)Se₂ absorbers is studied by measuring the laterally resolved optoelectronic properties of differently textured Cu(In,Ga)Se₂ films with Kelvin probe force microscopy and cathodoluminescence. The grain boundaries in (112)- and (220/204)-textured films behave differently. The work-function profile measured with the Kelvin probe across a grain boundary in (112)-textured films shows a dip indicating positive charges at the grain boundaries. In panchromatic cathodoluminescence mappings in a transmission electron microscope, such grain boundaries appear dark, i.e. the strongly reduced luminescence indicates that the grain boundaries represent strong non-radiative recombination centers. In contrast, grain boundaries in (220/204)-textured films give rise to a dip or a step in the work function indicating slightly negative charge or neutrality. Cathodoluminescence is reduced at such grain boundaries, but less dramatically than in the (112)-textured case. However, when Na is present in the (220/204)-textured films, the grain boundaries are almost invisible in cathodoluminescence mappings. This strong passivating action of Na occurs only in the (220/204)-textured films, due to a particular grain-boundary population. In (112)-textured films and films without pronounced texture, this passivation effect is much less noticeable. PACS 73.50.Gr; 73.61.Ga; 78.60.Hk; 87.64.Dt     

Calorimetric studies of the growth of Desulfovibrio desulfuricans in the presence of nitrocellulose

Calorimetric results indicate that nitrocellulose (NC)-induced changes in the metabolism of Desulfovibrio desulfuricans 1388 are caused by both chemical (nitrate) and physical (biofilm formation) factors. Nitrate added to lactate-based culture medium with nitrocellulose competed for the electron flux from lactate and suppressed the bacterial sulfidogenesis and growth. The presence of an insoluble compound (carbon backbone of the polymer) induced the creation of a biofilm-like structure with its own metabolism.     

Influence of oxidation time on semiconductive behaviour of thermally grown oxide films on AISI 304L

The oxide films formed on AISI 304L stainless steel at 300 °C in the oxidation time range between 2 and 4 h have been studied by photoelectrochemistry. Photocurrents were investigated as a function of the wavelength of the incident light and the electrode potential. The investigation allowed the determination of the semiconductive properties of the oxides. The oxide films showed n-type behaviour. A duplex structure of the oxide films has been suggested on the basis of the photocurrent spectra, with an internal oxide layer having an optical gap (E_g2 = 2.16-2.3 eV) depending on the applied potential and oxidation time, higher to that of the external oxide layer (E_g1 ≈ 1.9 eV). Significant variations in the amplitude of the photocurrent were detected as a function of the applied potential and the oxidation time.     

Chaotic-to-ordered state transition of cathode-sheath instabilities in DC glow discharge plasmas

Transition from chaotic to ordered state has been observed during the initial stage of a discharge in a cylindrical DC glow discharge plasma. Initially it shows a chaotic behavior but increasing the discharge voltage changes the characteristics of the discharge glow and shows a period subtraction of order 7 period → 5 period → 3 period → 1 period, i.e. the system goes to single mode through odd cycle subtraction. On further increasing the discharge voltage, the system goes through period doubling, like 1 period → 2 period → 4 period. On further increasing the voltage, the system goes to stable state through two period subtraction, like 4 period → 2 period → stable.     

Re-hardening of hadron transverse mass spectra in relativistic heavy-ion collisions

We analyze the spectra of pions and protons in heavy-ion collisions at relativistic energies from 2 A GeV to 65+65 A GeV by using a jet-implemented hadron-string cascade model. In this energy region, hadron transverse mass spectra first show softening until SPS energies, and re-hardening may emerge at RHIC energies. Since hadronic matter is expected to show only softening at higher energy densities, this re-hardening of spectra can be interpreted as a good signature of the quark-gluon plasma formation     

Large-mass and high-temperature behaviour in perturbative quantum field theory

Bounds for large-mass behaviour in renormalized perturbation expansions at zero temperature, which were previously obtained by Manoukian and Caswell-Kennedy in momentum space, are rederived in the parametric representation. A very simple unified proof of the BPHZ theorem and the decoupling theorem is also given. A new technique for asymptotic analysis, based on a generalized Kontorovich-Lebedev integral transform, is introduced. This method is applied to find the leading high-temperature behaviour of perturbative field theories in the imaginary-time formalism. We prove that diagrams containing nonstatic modes, which at high temperature behave like particles with a large mass, are suppressed relative to purely static diagrams. This rigorously proves a limited form of dimensional reduction at infinite temperature.     

Plasma polymers from chloromethyltrimethylsilane and their modification with sodium azide

Plasma polymerization of chloromethyltrimethylsilane (CMTMS) was investigated by elemental analysis, infrared spectroscopy, and ESCA, and the modification of Cl substituents in the plasma polymers from CMTMS with sodium azide was discussed. CMTMS was plasma polymerized to yield filmy polymers. The polymer deposition rate was faster than that from tetramethylsilane containing no Cl atom. The plasma polymers from CMTMS were mainly composed of CH₃, CH₂, Si? CH₃, Si? O? Si, and Si? O? C groups with a small amount of C? Cl groups. The Cl substituents incorporated into the plasma polymers were capable of substitution reactions with azide groups to form azide polymers.