Surface structure and interface dynamics of alkanethiol self-assembled monolayers on Au(111)

Scanning tunneling microscopy (STM) and high-resolution electron energy loss spectroscopy (HREELS) were used to examine the structural transitions and interface dynamics of octanethiol (OT) self-assembled monolayers (SAMs) caused by long-term storage or annealing at an elevated temperature. We found that the structural transitions of OT SAMs from the c(4 x 2) superlattice to the (6 x square root 3) superlattice resulting from long-term storage were caused by both the dynamic movement of the adsorbed sulfur atoms on several adsorption sites of the Au(111) surface and the change of molecular orientation in the ordered layer. Moreover, it was found that the chemical structure of the sulfur headgroups does not change from monomer to dimer by the temporal change of SAMs at room temperature. Contrary to the results of the long-term-stored SAMs, it was found that the annealing process did not modify either the interfacial or chemical structures of the sulfur headgroups or the two-dimensional c(4 x 2) domain structure. Our results will be very useful for a better understanding of the interface dynamics and stability of sulfur atoms in alkanethiol SAMs on Au(111) surfaces.     

CoMnO2-Decorated Polyimide-Based Carbon Fiber Electrodes for Wire-Type Asymmetric Supercapacitor Applications

In this work, we report the carbon fiber-based wire-type asymmetric supercapacitors (ASCs). The highly conductive carbon fibers were prepared by the carbonized and graphitized process using the polyimide (PI) as a carbon fiber precursor. To assemble the ASC device, the CoMnO₂-coated and Fe₂O₃-coated carbon fibers were used as the cathode and the anode materials, respectively. Herein, the nanostructured CoMnO₂ were directly deposited onto carbon fibers by a chemical oxidation route without high temperature treatment in presence of ammonium persulfate (APS) as an oxidizing agent. FE-SEM analysis confirmed that the CoMnO₂-coated carbon fiber electrode exhibited the porous hierarchical interconnected nanosheet structures, depending on the added amount of APS, and Fe₂O₃-coated carbon fiber electrode showed a uniform distribution of porous Fe₂O₃ nanorods over the surface of carbon fibers. The electrochemical properties of the CoMnO₂-coated carbon fiber with the concentration of 6 mmol APS presented the enhanced electrochemical activity, probably due to its porous morphologies and good conductivity. Further, to reduce the interfacial contact resistance as well as improve the adhesion between transition metal nanostructures and carbon fibers, the carbon fibers were pre-coated with the Ni layer as a seed layer using an electrochemical deposition method. The fabricated ASC device delivered a specific capacitance of 221 F g⁻¹ at 0.7 A g⁻¹ and good rate capability of 34.8% at 4.9 A g⁻¹. Moreover, the wire-type device displayed the superior energy density of 60.2 Wh kg⁻¹ at a power density of 490 W kg⁻¹ and excellent capacitance retention of 95% up to 3000 charge/discharge cycles.     

Electrode performance and X-ray absorption spectroscopy of La0.8Sr0.2Mn1−x Cu x O3 (0 ≤ x ≤ 0.2)–GDC composite cathodes for SOFCs

Electrochemical properties of composite cathodes consisting of La_0.8Sr_0.2Mn_1?x Cu _x O₃ (LSMCu, 0?≤?x?≤?0.2) and Ce_0.8Gd_0.2O_2?x (GDC) were determined by impedance spectroscopy, and conduction mechanism for the composite cathodes was investigated by a near-edge X-ray absorption fine-structure analysis (NEXAFS). LSMCu–GDC cathodes showed lower polarization resistance (R _p) than LSM–GDC up to 750 °C, whereas they exhibited better performance at higher temperature (≥800 °C). The best performance was achieved with the LSMCu10–GDC cathode: 0.27 and 0.08?Ω cm² at 800 °C and 850 °C, respectively. NEXAFS and refinement results confirmed that Cu doping caused the oxidation of Mn³⁺ to Mn⁴⁺ and lattice contraction. This additional Mn⁴⁺ can lead to the formation of oxygen vacancies when Mn⁴⁺ is converted to Mn³⁺ at relatively high temperatures (above 600 °C). This in turn contributes to improved oxygen ion transport in LSM. The LSMCu–GDC composite cathode can thus be considered a suitable potential cathode for SOFC applications.     

High speeds complementary integrated circuits fabricated with all‐printed polymeric semiconductors

Inkjet‐printed high speed polymeric complementary circuits are fabricated using an n‐type ([poly{[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐dithiophene)} [P(NDI2OD‐T2), Polyera ActivInk N2200] and two p‐type polymers [poly(3‐hexylthiophene) (P3HT) and a dithiophene‐based polymer (Polyera ActivInk P2100)]. The top‐gate/bottom‐contact (TG/BC) organic field‐effect transistors (OFETs) exhibit well‐balanced and very‐high hole and electron mobilities (μ_FET) of 0.2–0.5 cm²/Vs, which were enabled by optimization of the inkjet‐printed active features, small contact resistance both of electron and hole injections, and effective control over gate dielectrics and its orthogonal solvent effect (selection of poly(methyl methacrylate) and 2‐ethoxyethanol). Our first demonstrated inkjet‐printed polymeric complementary devices have been integrated to high‐performance complementary inverters (gain >30) and ring oscillators (oscillation frequency ～50 kHz). We believe that the operating frequency of printable organic circuits can be further improved more than 10 MHz by fine‐tuning of the device architecture and optimization of the p‐ and n‐channel semiconductor processing. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

In situ‐generated Ru(III)‐mediated ATRP from the polymeric Ru(III) complex in the absence of activator generation agents

Past research has examined the atom transfer radical polymerization (ATRP) with high oxidation state metal complexes and without the need for any additives such as reducing agent or free radical initiator. To extend this research, half‐metallocene ruthenium(III) (Ru(III)) catalysts were used for the polymerization of methyl methacrylate (MMA) for the first time. These catalysts were generated in situ simply by mixing phosphorus‐containing ligand and pentamethylcyclopentadienyl (Cp*) Ru(III) polymer ((Cp*RuCl₂)_n). The complexes in their higher oxidation state such as Cp*RuCl₂(PPh₃) were air‐stable, highly active, and removable catalysts for the ATRPs of MMA with both precision control of molecular weight and narrow polydispersity index. The addition of ppm amount of metal catalyst contributed to the formation of very well‐defined homopolymers and copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Fine competition and control among argentophilic,electrostatic, and π···π interactions in a molecular chair structure

The reaction of AgX (X⁻ = NO₃ ⁻, ClO₄ ⁻, or CF₃SO₃ ⁻) with 1,3-bis(3-pyridyl)tetramethyldisiloxane (L) at room temperature affords 20-membered metallacyclodimers, [Ag(L)]₂(X)₂. For the macrocyclodimer, fine competition among argentophilic, electrostatic, and π···π interaction exists. The macrocyclodimer is a unique molecular chair that tunes a transannular argentophilic interaction via the bite size of the counteranions. In order to reversibly control the argentophilic interaction, anion exchange has been accomplished. The anion exchangeability depends on the water solubility rather than the electrostatic interaction between silver(I) and anions.     

Blue Luminescence of Dendrimer‐Encapsulated Gold Nanoclusters

Direct evidence for the blue luminescence of gold nanoclusters encapsulated inside hydroxyl‐terminated polyamidoamine (PAMAM) dendrimers was provided by spectroscopic studies as well as by theoretical calculations. Steady‐state and time‐resolved spectroscopic studies showed that the luminescence of the gold nanoclusters consisted largely of two electronic transitions. Theoretical calculations indicate that the two transitions are attributed to the different sizes of the gold nanoclusters (Au₈ and Au₁₃). The luminescence of the gold nanoclusters was clearly distinguished from that of the dendrimers.     

Synthesis of brominated directly fused diporphyrins through gold(III)-mediated oxidation

Highly efficient synthesis of meso,meso-dibromo doubly and triply fused diporphyrins has been achieved through a powerful oxidative coupling mediated by AuCl3-AgOTf combination. In addition, palladium-catalyzed debromination of meso-bromoporphyrins has been developed. This debromination protocol enables employment of bromine as a protecting group for the reactive meso-position of porphyrins.