A cobalt(III)-salen complex with an axial substituent in the diamine backbone: stereoselective recognition of amino alcohols

A cobalt(III)-salen complex (3) with an axial substituent on the diamine backbone has been synthesized. Crystal structure reveals that the axial substituent (p-nitrophenyl group) is positioned in close proximity to the metal binding site. The stereoselectivity of the cobalt complex for binding amino alcohols increases with increasing steric bulk of the amino alcohol from alaninol (2.9) to valinol (6.2) and t-leucinol (36.0).     

Quantum capping potentials with point charges: a simple QM/MM approach for the calculation of large-molecule NMR shielding tensors

A simple quantum-mechanics/molecular-mechanics (QM/MM) approach for calculating NMR shielding tensors (sigma) is presented. The method involves capping the QM region with quantum capping potentials (QCPs) and representing the MM region with point charges. Test calculations on simple systems without MM charges show that calculated sigma values improve relative to the full QM results with increasing distance between the capped bond and chromophore. Calculations on the histidine amino acid and cytosine monophosphate (CMP) nucleic acid show that the use of QCPs with point charges result in mean errors in the isotropic component of sigma that are less than 1.6 ppm. The results also reveal that, contrary to previous work, the explicit effect of point charges on sigma through coupling with gauge factors, as in the gauge including atomic orbital approach, is minimal for the CMP molecule. The present QM/MM approach for calculating sigma is easy to apply and requires no code modification.     

Sequence- and site-specific photodissociation at 266 nm of protonated synthetic polypeptides containing a tryptophanyl residue

Photodissociation at 266 nm of protonated synthetic polypeptides containing a tryptophanyl residue was investigated using a homebuilt tandem time-of-flight mass spectrometer equipped with a matrix-assisted laser desorption/ionization source. Efficient photodissociation of the protonated peptides was demonstrated. Most of the intense peaks in the laser-induced tandem mass spectra were sequence ions. Furthermore, sequence ions due to cleavages at all the peptide bonds were observed; this is a feature of the technique that is particularly useful for peptide sequencing. Fragmentations at both ends of the tryptophanyl residue were especially prevalent, which can be useful for location of the tryptophanyl chromophore in a peptide.     

Phytohormone Supplementation Significantly Increases Growth of Chlamydomonas reinhardtii Cultivated for Biodiesel Production

Cultivation is the most expensive step in the production of biodiesel from microalgae, and substantial research has been devoted to developing more cost-effective cultivation methods. Plant hormones (phytohormones) are chemical messengers that regulate various aspects of growth and development and are typically active at very low concentrations. In this study, we investigated the effect of different phytohormones on microalgal growth and biodiesel production in Chlamydomonas reinhardtii and their potential to lower the overall cost of commercial biofuel production. The results indicated that all five of the tested phytohormones (indole-3-acetic acid, gibberellic acid, kinetin, 1-triacontanol, and abscisic acid) promoted microalgal growth. In particular, hormone treatment increased biomass production by 54 to 69 % relative to the control growth medium (Tris–acetate–phosphate, TAP). Phytohormone treatments also affected microalgal cell morphology but had no effect on the yields of fatty acid methyl esters (FAMEs) as a percent of biomass. We also tested the effect of these phytohormones on microalgal growth in nitrogen-limited media by supplementation in the early stationary phase. Maximum cell densities after addition of phytohormones were higher than in TAP medium, even when the nitrogen source was reduced to 40 % of that in TAP medium. Taken together, our results indicate that phytohormones significantly increased microalgal growth, particularly in nitrogen-limited media, and have potential for use in the development of efficient microalgal cultivation for biofuel production.     

Studies on the Complexes of N,N′-Bis[o-(diphenylphosphino)benzylidene]ethylenediamine with Transition Metal Ions

The thermodynamic parameters for the interaction of Cu²⁺, Ni²⁺, Co²⁺, Cd²⁺, andAg⁺ with the new title ligand have been determined by titration calorimetry in 50% THF–methanol (V/V) at 25 °C.Ag⁺ exhibited remarkably higher complexation selectivity.Ag⁺ and several transition metal ions have been transportedusing this ligand as carrier in a bulk liquid membrane. CompetitiveAg⁺–M²⁺ transport studies have also beencarried out for the same system. In this membrane transport study, high transport of Ag⁺ was observed in both single and competitiveAg⁺–M²⁺ transport studies. The complexformation of N,N-bis[o-(diphenylphosphino)benzylidene]ethylenediamine (P₂N₂) with silver,[Ag(P₂N₂)] (NO₃), (1) is reported. Complex 1 has been characterized by X-ray crystallography. 1 ismonoclinic, space group P2_1/n (No. 14), with cell dimensionsa = 13.398(4) , b=12.577(5) , c = 21.521(4) , =100.14(2) , V = 3570(2) ³ and Z = 4.     

Size-based analysis of incinerator fly ash using gravitational SPLITT fractionation, sedimentation field-flow fractionation, and inductively coupled plasma-atomic emission spectroscopy

Fly ash has been regarded as hazardous because of its high adsorption of toxic organic and/or inorganic pollutants. Fly ash is also known to have broad distributions of different chemical and physical properties, such as size and density. In this study, fly ash emitted from a solid waste incinerator was pre-fractionated into six sub-populations by use of gravitational SPLITT fractionation (GSF). The GSF fractions were then analyzed by sedimentation field-flow fractionation (SdFFF) and ICP–AES. SdFFF analysis showed the fly ash has a broad size distribution ranging from a few nanometers up to about 50 µm. SdFFF results were confirmed by electron microscopy. Inductively coupled plasma–atomic emission spectroscopy (ICP–AES) analysis of the GSF fractions showed the fly-ash particles contain a variety of inorganic elements including Ca, Si, Mg, Fe, and Pb. The most abundant in fly ash was Ca, followed by Si then Mg. No correlations were found between trace element concentration and particle size.     

Pseudopartial wetting and precursor film growth in immiscible metal systems

We explore the equilibrium wetting behavior and precursor film growth in pure and alloy metallic systems. The systems exhibit equilibrium "pseudopartial" wetting, that is, a thin film in equilibrium with a nonzero contact angle in both liquid and solid states. The film spreading kinetics clearly indicates a diffusive transport mechanism. The alloying has only a small impact on the equilibrium wetting properties but strongly affects the transport during the growth of the precursor film.     

Catalytic combustion of chlorobenzene over V2O5/TiO2 catalysts prepared by the precipitation-deposition method

Catalytic combustion of chlorobenzene over supported vanadium oxides has been investigated. TiO₂ was prepared by the sol-gel method from titanium isopropoxide. The supported vanadium oxide catalysts have been prepared by precipitation-deposition and impregnation method and characterized by XRD, FT-Raman and TPR. In the VO_x/TiO₂catalysts prepared using the impregnation method, when vanadium loading reaches 3 wt.%, the activity shows a maximum. However, in the VO_x/TiO₂catalysts prepared by precipitation-deposition, when vanadium loading reaches 7 wt.%, the activity shows a maximum. This result suggests that the precipitation-deposition can yield a higher metal loading on the support and a high dispersion compared to the impregnation method. This revised version was published online in August 2006 with corrections to the Cover Date.     

Purification of a primary coolant in a nuclear power plant using a magnetic filter - electrodeionization hybrid separation system

A magnetic filter — continuous electrodeionization (CEDI) hybrid separation system was investigated for the purification of the primary coolant in a nuclear power plant. A magnetic filter system with a 3000 Gauss magnetic field and a CEDI system with a cell consisting of 3 compartments were used for the removal of magnetite and nickel ions, respectively. The hybrid separation system achieved removal rates of 98% for magnetite and 99% for the nickel ions demonstrating its feasibility for the purification of primary coolant.The authors gratefully acknowledge the Basic Atomic Energy Research Institute (BAERI) program at the Korea Institute of Science and Technology Evaluation and Planning (KISTEP) for the financial support to carry out this work.     

Dual-purpose sample trap for on-line strong cation-exchange chromatography/reversed-phase liquid chromatography/tandem mass spectrometry for shotgun proteomics. Application to the human Jurkat T-cell proteome

A dual-purpose sample-trapping column is introduced for the capacity enhancement of proteome analysis in on-line two-dimensional nanoflow liquid chromatography (strong cation-exchange chromatography followed by reversed-phase liquid chromatography) and tandem mass spectrometry. A home-made dual trap is prepared by sequentially packing C18 reversed-phase (RP) particles and SCX resin in a silica capillary tubing (1.5 cm x 200 microm I.D. for SCX, 0.7 cm x 200 microm for RP) ended with a home-made frit and is connected to a nanoflow column having a pulled tip treated with an end frit. Without having a separate fraction collection and concentration process, digested peptide mixtures were loaded directly in the SCX part of the dual trap, and the SCX separation of peptides was performed with a salt step elution initiated by injecting only 8 microL of NH4HCO3 solution from the autosampler to the dual trap. The fractionated peptides at each salt step were directly transferred to the RP trap packed right next to the SCX part for desalting, and a nanoflow LC-MS-MS run was followed. During the sample loading-SCX fractionation-desalting, flow direction was set to bypass the analytical column to prevent contamination. The entire 2D-LC separation and MS-MS analysis were automated. Evaluation of the technique was made with an injection of 15 microg peptide mixtures from human Jurkat T-cell proteome, and the total seven salt step cycles followed by each RPLC run resulted in an identification of 681 proteins.