Design Features of a Prompt Gamma Neutron Activation Analysis System at HANARO

The design features are described of a prompt gamma neutron activation analysis system at HANARO, a 30 MW research reactor in the Korea Atomic Energy Research Institute. The beam consists of polychromatic thermal neutrons diffracted by a set of pyrolytic graphite crystals at orders n in the range 1n6 at a Bragg angle of 45° on a horizontal beam line. A neutron flux of 1.0·10⁸ n·cm^–2·s^–1 is calculated at the sample position from the reflectivity of the crystal which has been confirmed in a measurement of a diffracted neutron spectrum using a time-of-flight spectrometer and gold-wire activation. The fast neutron and gamma backgrounds will be low due to the use of a diffracted beam and a tapered collimator. The detection system comprises a 30% n-type HPGe detector, signal electronics and a fast ADC. The first application of this system will be the analysis of boron concentration in biological samples for neutron capture therapy. Construction of the beam line and the arrangement of the detection system is proceeding.     

Reduction of the IgE-binding ability and maintenance of immunogenicity of gamma-irradiated Dermatophagoides farinae

House dust mites, Dermatophagoides farinae (DF) and Dermatophagoides pteronyssinus, are major allergens in the most common indoor allergen and are important risk factor for asthma. The modified antigen has been studied to treat allergic disorder. This study was carried out to measure possibility of modified allergen using gamma irradiation to treat allergy such as asthma. DF solutions (2 mg/ml) as target allergen were irradiated with Co-60 at 50 and 100 kGy. Conformational alternation of irradiated DF was observed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Levels of anti-irradiated DF mouse IgGs (sub-isotypes) against intact DF were measured similar to that of anti-intact DF IgGs. The binding abilities of house dust mite-allergic patients’ IgE were reduced depending on radiation dose, and irradiation could inhibit the binding ability of patients’ IgE more than 40%. This study has shown that the binding ability of IgE was reduced by conformational alteration by irradiation and the irradiated DF had epitopes capable to induce immunogeniciy.     

Seasonal variation and activity size distribution of <Superscript>7</Superscript>Be in ambient air

The seasonal variation of the ⁷Be activities in air and the size distribution of the ⁷Be aerosols were studied by using a continuous air sampler and a five stage cascade impactor. The mean monthly activity level of ⁷Be at the Korea Atomic Energy Research Institute (KAERI) site varied from 0.5 to 4.8 Bq·m⁻³ and revealed a seasonal variation, in which the ⁷Be activity levels were high in winter and low in summer. The mass size distribution showed a bi-modal distribution with a higher peak around 0.49 μm and a smaller peak between 3 μm and 7.2 μm. The activity median aerodynamic diameter (AMAD) decreased with increasing ambient ⁷Be concentrations. The mean residence times by using a mean growth rate of 0.004 μm·h⁻¹ were estimated to be 2.5–6.4 days. The AMAD has an increasing tendency with higher relative humidity. It seemed that the high humidity condition facilitated the growth of the aerosol, resulting in increased deposition rates of the aerosols and the low ⁷Be content in the surface air. The AMAD of the ⁷Be aerosols increased with an increasing temperature, but the temperature dependency of AMAD should be explained with geological and meteorological conditions.     

High levels of soluble herpes virus entry mediator in sera of patients with allergic and autoimmune diseases

Herpes virus entry mediator (HVEM) is a newly discovered member of the tumor necrosis factor receptor (TNFR) superfamily that has a role in herpes simplex virus entry, in T cell activation and in tumor immunity. We generated mAb against HVEM and detected soluble HVEM (SHVEM) in the sera of patients with various autoimmune diseases. HVEM was constitutively expressed on CD4(+) and CD8(+) T cells, CD19(+) B cells, CD14(+) monocytes, neutrophils and dendritic cells. In three-way MLR, mAb 122 and 139 were agonists and mAb 108 had blocking activity. An ELISA was developed to detect sHVEM in patient sera. sHVEM levels were elevated in sera of patients with allergic asthma, atopic dermatitis and rheumatoid arthritis. The mAbs discussed here may be useful for studies of the role of HVEM in immune responses. Detection of soluble HVEM might have diagnostic and prognostic value in certain immunological disorders.     

Induction of nitric oxide synthase (NOS) by soluble glucocorticoid induced tumor necrosis factor receptor (sGITR) is modulated by IFN-gamma in murine macrophage

Earlier study showed that glucocorticoid induced tumor necrosis factor receptor (GITR), a new TNFR family, activated murine macrophages to express inducible nitric oxide synthase (iNOS) and to generate nitric oxide (NO). A possible involvement of pro-inflammatory cytokines on NO production by GITR was investigated in vitro systems and signaling molecules contributing to sGITR-induced iNOS production are determined in Raw 264.7 cells, a murine macrophage cell line. The result showed that the synergy was afforded by the combination of GITR with IFN-g in a dose-dependent manner but IFN-gamma alone was not able to induce NOS. No effects were observed with TNF-alpha, IL-1beta, or IL-6 co-treated with GITR. To determine signaling molecules contributing to sGITR-induced iNOS production, a specific inhibitor for signal pathway proteins tested showed that PDTC (NF-kappaB) and genistein (tyrosine kinase) inhibited NOS induction significantly, while sodium orthovanadate (tyrosine phosphatase) potentiated NOS expression. These results suggest that activations of NF-kappaB were involved in induction of iNOS by GITR and IFN-gamma priming caused earlier and stronger NF-kappaB activation.     

Synthesis and reactivity of hydrazido(2-) and imido derivatives of titanium(IV) tetratolylporphyrin

Titanium porphyrin hydrazido complexes (TTP)Ti = NNR2 (TTP = meso-tetra-p-tolylporphyrinato dianion; R = Me (1), Ph (2)) were synthesized by treatment of (TTP)TiCl2 with 1,1-disubstituted hydrazines H2NNR2 (R = Me, Ph) in the presence of piperdine. The nucleophilic character of the hydrazido moiety was demonstrated in the reactions of complexes 1 and 2 with p-chlorobenzaldehyde, which yielded the titanium oxo complex (TTP)-Ti = O and the respective hydrazones. Protonation of complexes 1 and 2 with phenol or water produced the 1,1-disubstituted hydrazine along with (TTP)Ti(OPh)2 or (TTP)Ti = O, respectively. Similar reactivity of p-chlorobenzaldehyde and phenol with (TTP)Ti = NiPr, 3, was observed. The reaction of complex 3 with nitrosobenzene cleanly formed the azo compound iPrN = NPh and the terminal oxo product (TTP)Ti = O.     

Studies on polymers and composites from lignin and fiber derived from sugar cane

Sugarcane fiber (i.e. bagasse) lignin has a larger fraction of aromatics unsubstitution in the ortho position than hardwood or softwood lignin and hence has the greater ability to be derivatized. Furthermore, organosolv lignin has a higher purity than sulfonated and kraft lignins. This work examines the purification of organosolv lignin derived from bagasse and the physico‐chemical properties of the lignin and lignin‐phenol formaldehyde (PF) resin coatings, and composites. The wetability tests have shown that lignin and lignin‐PF resin films are effective water barrier coatings, though the contact angles of lignin‐PF resin films were considerably less than the wax films. The overall mechanical properties (i.e. peak stress, peak strain and modulus) of the bagasse fiber composites were lower than the values obtained with the composites without the inclusion of bagasse fiber. Copyright © 2007 John Wiley & Sons, Ltd.     

Protofilaments, filaments, ribbons, and fibrils from peptidomimetic self-assembly: implications for amyloid fibril formation and materials science

Deciphering the mechanism(s) of β-sheet mediated self-assembly is essential for understanding amyloid fibril formation and for the fabrication of polypeptide materials. Herein, we report a simple peptidomimetic that self-assembles into polymorphic β-sheet quaternary structures including protofilaments, filaments, fibrils, and ribbons that are reminiscent of the highly ordered structures displayed by the amyloidogenic peptides Aβ, calcitonin, and amylin. The distribution of quaternary structures can be controlled by and in some cases specified by manipulating the pH, buffer composition, and the ionic strength. The ability to control β-sheet-mediated assembly takes advantage of quaternary structure dependent pK(a) perturbations. Biophysical methods including analytical ultracentrifugation studies as well as far-UV circular dichroism and FT-IR spectroscopy demonstrate that linked secondary and quaternary structural changes mediate peptidomimetic self-assembly. Electron and atomic force microscopy reveal that peptidomimetic assembly involves numerous quaternary structural intermediates that appear to self-assemble in a convergent fashion affording quaternary structures of increasing complexity. The ability to control the assembly pathway(s) and the final quaternary structure(s) afforded should prove to be particularly useful in deciphering the quaternary structural requirements for amyloid fibril formation and for the construction of noncovalent macromolecular structures.     

Analysis of an ancient bronze statue by external beam pixe

A quantitative analysis of an ancient Buddha statue was performed by external beam Proton Induced X-ray Emission for the purpose of identifying its originality. It is shown how the PIXE method can be applied for archeological study. The elemental composition of the statue is compared with that of several samples with definite ages. The experiment was performed by extracting 2.4 MeV proton beam through a 2 mm diameter collimator and 7.6 m kapton foil to the He atmosphere. X-rays were measured by a Si(Li) detector. The analysed elements were Fe, Cu, Ag, Au and Hg for gold coating and Fe, Ni, Cu, Zn, As, Ag, Sn, Au, Pb and Bi for bronze body.