Biomolecules-carbon nanotubes doped conducting polymer nanocomposites and their sensor application

A simple method for preparing bio-functionalized soluble single-walled carbon nanotubes (SWNTs) is described. Different proteins such as bovine serum albumin (BSA), cytochrome c and horseradish peroxidase (HRP) were used to solubilize low functionality SWNTs in water aided by sonication. The unbound proteins were removed by column chromatography and the SWNT-protein conjugate was used as the sole anionic dopant in electropolymerization of polypyrrole from polymerization solution at pH above the isoelectric point of the protein to provide a negative charge. The morphology of the polypyrrole with SWNT-protein dopant was found to be three-dimensional and fibrous with wide open interlocking pores in contrast to smooth and cauliflower-like for chloride doped polypyrrole. Enhanced sensor performance was demonstrated for hydrogen peroxide detection on polypyrrole/SWCNT-HRP nanocomposites modified electrode. Such nanocomposites can be potentially applied for other biosensor and bio-fuel cell applications.     

Characterization of amiodarone metabolites and impurities using liquid chromatography/atmospheric pressure chemical ionization mass spectrometry

Using the high performance liquid chromatography/atmospheric pressure chemical ionization tandem mass spectrometry (HPLC/APCI-MS/MS) technique, together with established trends from the literature, the structures of metabolites and impurities of amiodarone, an anti-arrhythmic drug, have been assigned. By comparing analyses of products of incubation with rat liver microsomes with controls in which glucose 6-phosphate dehydrogenase was omitted, metabolites could be distinguished from impurities. Structures for the two proposed metabolites and four impurities are proposed.     

An efficient synthesis of novel carbocyclic nucleosides with use of ring-closing metathesis from D-lactose

This paper describes an efficient synthetic route for various types of novel carbocyclic nucleosides. The required stereochemistry of the targeted nucleosides was successfully obtained with use of Grubbs cyclization and Trost allylic alkylation from the carbohydrate chiral template "D-lactose".     

Influence of basic residues on dissociation kinetics and dynamics of singly protonated peptides: time‐resolved photodissociation study

Product ion yields in postsource decay and time‐resolved photodissociation at 193 and 266 nm were measured for some peptide ions with lysine ([KF₆ + H]⁺, [F₆K + H]⁺, and [F₃KF₃ + H]⁺) formed by matrix‐assisted laser desorption ionization. The critical energy (E₀) and entropy (ΔS^?) were determined by RRKM fitting of the data. The results were similar to those found previously for peptide ions with histidine. To summarize, the presence of a basic residue, histidine or lysine, inside a peptide ion retarded its dissociation by lowering ΔS^?. On the basis of highly negative ΔS^?, presence of intramolecular interaction involving a basic group in the transition structure was proposed. Copyright © 2009 John Wiley & Sons, Ltd.     

Facile synthesis of core‐surface crosslinked nanoparticles by interblock RAFT polymerization

A new, efficient method for synthesizing stable nanoparticles with poly(ethylene oxide) (PEO) functionalities on the core surface, in which the micellization and crosslinking reactions occur in one pot, has been developed. First, amphiphilic PEO‐b‐PS copolymers were synthesized by reversible addition fragmentation chain transfer (RAFT) radical polymerization of styrene using (PEO)‐based trithiocarbonate as a macro‐RAFT agent. The low molecular weight PEO‐b‐PS copolymer was dissolved in isopropyl alcohol where the block copolymer self‐assembled as core‐shell micelles, and then the core‐shell interface crosslink was performed using divinylbenzene as a crosslinking agent and 2,2′‐azobisisobutyronitrile as an initiator. The design of the amphiphilic RAFT agent is critical for the successful preparation of core‐shell interface crosslinked micellar nanoparticles, because of RAFT functional groups interconnect PEO and polystyrene blocks. The PEO functionality of the nanoparticles surface was confirmed by ¹H NMR and FTIR. The size and morphology of the nanoparticles was confirmed by scanning electron microscopy, transmission electron microscopy, and dynamic laser light scattering analysis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of three new 1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl) pyrrole‐based donor polymers and their bulk heterojunction solar cell applications

A series of three new 1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl)pyrrole‐based polymers such as poly[1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl)pyrrole] ( PTPT ), poly[1,4‐(2,5‐bis(octyloxy)phenylene)‐alt‐5,5'‐(1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl)pyrrole)] ( PPTPT ), and poly[2,5‐(3‐octylthiophene)‐alt‐5,5'‐(1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl)pyrrole)] ( PTTPT ) were synthesized and characterized. The new polymers were readily soluble in common organic solvents and the thermogravimetric analysis showed that the three polymers are thermally stable with the 5% degradation temperature >379 °C. The absorption maxima of the polymers were 478, 483, and 485 nm in thin film and the optical band gaps calculated from the onset wavelength of the optical absorption were 2.15, 2.20, and 2.13 eV, respectively. Each of the polymers was investigated as an electron donor blending with PC₇₀BM as an electron acceptor in bulk heterojunction (BHJ) solar cells. BHJ solar cells were fabricated in ITO/PEDOT:PSS/polymer:PC₇₀BM/TiO_x/Al configurations. The BHJ solar cell with PPTPT :PC₇₀BM (1:5 wt %) showed the power conversion efficiency (PCE) of 1.35% (J_sc = 7.41 mA/cm², V_oc = 0.56 V, FF = 33%), measured using AM 1.5G solar simulator at 100 mW/cm² light illumination. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Helical silica nanotubes: Nanofabrication architecture,transfer of helix and chirality to silica nanotubes

A series of neutral gelators and cationic amphiphiles derived from 1,2 diphenylethylenediamine (I) and 1,2-cyclohexanediamine (II) was synthesised. Helical silica nanotubes were prepared utilising these organic gelators through sol-gel polycondensation of tetraethoxy silane, (TEOS-silica source). Right- and left-handed helical nanotubes respectively were obtained from a 1: 1 mass mixture of optically active, (1S,2S)-III-(1S,2S)-V neutral gelator and (1S,2S)-IV-(1S,2S)-VI cationic amphiphile and a 1: 1 mass mixture of optically active, (1R,2R)-III-(1R,2R)-V neutral gelator and (1R,2R)-IV-(1R,2R)-VI cationic amphiphile, indicating that the handedness of the helical nanotubes varied with the change in the neutral gelator precursors used. The nanotubes were characterised by SEM images.     

Tuning the gas sensing performance of single PEDOT nanowire devices

This paper reports the synthesis and dopant dependent electrical and sensing properties of single poly(ethylenedioxythiophene) (PEDOT) nanowire sensors. Dopant type (i.e. polystyrenesulfonate (PSS(-)) and perchlorate (ClO(4)(-))) and solvent (i.e. acetonitrile and 1 : 1 water-acetonitrile mixture) were adjusted to change the conjugation length and hydrophilicity of nanowires which resulted in change of the electrical properties and sensing performance. Temperature dependent coefficient of resistance (TCR) indicated that the electrical properties are greatly dependent on dopants and electrolyte where greater disorder was found in PSS(-) doped PEDOT nanowires compared to ClO(4)(-) doped nanowires. Upon exposure to different analytes including water vapor and volatile organic compounds, these nanowire devices displayed substantially different sensing characteristics. ClO(4)(-) doped PEDOT nanowires from an acetonitrile bath show superior sensing responses toward less electronegative analytes and followed a power law dependence on the analyte concentration at high partial pressures. These tunable sensing properties were attributed to variation in the conjugation lengths, dopant type and concentration of the wires which may be attributed to two distinct sensing mechanisms: swelling within the bulk of the nanowire and work function modulation of Schottky barrier junction between nanowire and electrodes.     

Formulation variation and in vitro-in vivo correlation for a rapidly swellable three-layered tablet of tamsulosin HCl

In order to develop a preferable once-a-day oral tablet formulation, various formulations of three-layered tablets containing tamsulosin HCl as a hydrophilic model drug were evaluated and compared with a commercial reference, tamsulosin OCAS?. When the test tablet was exposed to a release medium, the medium quickly permeated to the mid-layer and the two barrier layers swelled surrounding the mid-layer rapidly. Volume expansion showed faster and enough swelling of the three-layered tablet up to 2 h. Larger amount of barrier layers caused reduced release kinetics and a high molecular weight polymer showed more resistance against agitation force. A formulation with water-soluble mid-layer showed fast erosion decreasing its volume significantly. On the pharmacokinetic study, the mean ratio of area under the curve (AUC) and C(max) for the test formulation to the reference was 0.69 and 0.84, respectively, showing that the absorption of the drug was less complete than the reference. Plasma concentration at 24 h of the test formulation was higher than the reference. The Wagner-Nelson method showed that decreased initial dissolution rate might be the cause of the less complete absorption. On considering in vitro-in vivo correlation (IVIVC), level A, the reference (R2=0.981) showed more linear relationship than the test (R2=0.918) due to the decreased dissolution and absorption rate of the formulation. This result suggests that the in vitro dissolution profiles and release kinetics might be useful in correlating absorption kinetics as well as overall plasma drug concentration-time profiles for formulation studies.