Self-assembled monolayer of alkanephosphoric acid on nanotextured Ti

Surface modification of titanium and its alloys is of great importance for their practical application as biomedical implants. We have studied and compared assembly of dodecylphosphoric acid on commercial polished and on nanostructured titanium disks. The latter were produced by chemical etching that created nanoscale pits of typical size of about 20 nm. Enhanced hydrophobicity and high molecular density were obtained after functionalization of the nanotextured substrate. Aging tests showed a lifetime of the organic films of about one month in phosphate buffer. The samples were characterized by means of infrared spectroscopy, contact angle measurements, ellipsometry, and atomic force and scanning tunneling microscopies.     

Nitrogen modified carbide-derived carbons as adsorbents of hydrogen sulfide

Carbide-derived carbons produced from titanium carbide at temperatures from 600 degrees C to 1000 degrees C and exhibiting different porosities were treated with urea in order to introduce nitrogen containing species to their surface. Adsorption of hydrogen sulfide in the dynamic conditions in the presence of moisture was studied on initial and modified samples. The samples, before and after exposure to hydrogen sulfide, were characterized using adsorption of nitrogen, potentiometric titration, elemental analysis, and thermal analysis. The results showed that the introduction of nitrogen significantly enhances the performance of carbons in the process of hydrogen sulfide removal. The amount adsorbed and the degree of oxidation depended on the porosity. On the samples with very small pores, the adsorption was limited, probably owing to the sterical hindrances. With an increase in the size and volume of micropores, in which water and hydrogen sulfide can be accommodated, the efficiency of H(2)S removal by CDC increased.     

Nonequatorial circular orbits of spinning particles in the Schwarzschild–de Sitter background

In this paper analytical solutions of the Mathisson–Papapetrou equations that describe nonequatorial circular orbits of a spinning particle in the Schwarzschild–de Sitter background are studied, and the role of the cosmological constant is emphasized. It is shown that generally speaking a highly relativistic velocity of the particle is a necessary condition of motion along this type of orbits, with an exception of orbits locating close to the position of the static equilibrium, where low velocities are possible as well. Depending on the correlation between the spin orientation of the particle and its orbital velocity some of the possible nonequatorial circular orbits exist due to the repulsive action on the particle caused by the spin–gravity coupling and the others are caused by the attractive action. Here values of the energy of the particle on the corresponding orbits are also analyzed.     

Visible-light-enhanced interactions of hydrogen sulfide with composites of zinc (oxy)hydroxide with graphite oxide and graphene

Composites of zinc(oxy)hydroxide-graphite oxide and of zinc(oxy)hydroxide-graphene were used as adsorbents of hydrogen sulfide under ambient conditions. The initial and exhausted samples were characterized by XRD, FTIR, potentiometric titration, EDX, thermal analysis, and nitrogen adsorption. An increase in the amount of H(2)S adsorbed/oxidized on their surfaces in comparison with that of pure Zn(OH)(2) is linked to the structure of the composite, the relative number of terminal hydroxyls, and the kind of graphene-based phase used. Although terminal groups are activated by a photochemical process, the graphite oxide component owing to the chemical bonds with the zinc(oxy)hydroxide phase and conductive properties helps in electron transfer, leading to more efficient oxygen activation via the formation of superoxide ions. Elemental sulfur, zinc sulfide, sulfite, and sulfate are formed on the surface. The formation of sulfur compounds on the surface of zinc(oxy)hydroxide during the course of the breakthrough experiments and thus Zn(OH)(2)-ZnS heterojunctions can also contribute to the increased surface activity of our materials. The results show the superiority of graphite oxide in the formation of composites owing to its active surface chemistry and the possibility of interface bond formation, leading to an increase in the number of electron-transfer reactions.     

Sulfur‐containing derivatives of 1,4‐naphthoquinone,part 2: Sulfenyl derivative synthesis

Sulfenylchlorides, sulfenates, and sulfenamides of 1,4‐naphthoquinone were synthesized, and different methods of their syntheses were investigated. Synthesized sulfenates and sulfenamides are stable due to the large electron‐withdrawing potential of the conjugated quinonic system. Obtained mono‐ and bi‐functional sulfenderivatives are very important in organic synthesis of different new heterocyclic compounds. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:587–598, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20157     

A New Approach for Voltammetric Determination of Nefopam and its Metabolite

In present paper we described a new simple voltammetric method of determination of nefopam alkaloid and its metabolite – N‐oxide. N‐oxide of nefopam is reduced at the dropping mercury electrode (DME) and silver solid amalgam electrodes (AgSAE), which can effectively replace mercury and chemically modified electrodes. The reduction consists of two one‐electron stages each accompanied with one proton transfer. N‐oxide of nefopam can be obtained from nefopam substance by oxidation with potassium peroxymonosulfate. It was studied the effect of various factors on N‐oxide quantitative yield (pH, oxidation duration, reagents concentration) as well as on the reduction of N‐oxide at DME and p‐AgSAE (pH, the nature of background electrolyte, potential and time of accumulation). It was showed that the reduction current linearly increased with increasing of concentration of analgesic. Limit of quantiation is 10^?6 mol L^?1 at DME and 10^?7 mol L^?1 at p‐AgSAE. The developed method was applied for the analysis of commercial drug solution for injection “Nefopam” with recovery of 96.7 %, as well as for the spiked human urine samples. Excellent repeatability with a relative standard deviation below 5 % was achieved.     

A TPD‐MS study of the interaction of coumarins and their heterocyclic derivatives with a surface of fumed silica and nanosized oxides CeO2/SiO2, TiO2/SiO2, Al2O3/SiO2

The interactions between coumarins and the surface of fumed SiO₂, CeO₂/SiO₂, TiO₂/SiO₂ and Al₂O₃/SiO₂ were assessed by means of temperature‐programed desorption mass spectrometry. The different stages of the thermolysis of coumarin were identified and an analysis of the underlying reactions was performed. The kinetic parameters of the involved reactions were thus obtained. The decomposition of thiazolyl‐substituted coumarins was found to proceed through a ‘thiazole–thiazine’ ring expansion in the adsorbed state. A linear correlation between the sigma constants (Σσ) of the coumarin substituents and the activation energy of CO₂ formation was obtained. Copyright © 2010 John Wiley & Sons, Ltd.     

The catalytic efficiency of Fe-containing nanocomposites based on highly dispersed silica in the reaction of CO2 hydrogenation

Research on Chemical Intermediates - Oxide Ni(80)Fe(20)/SiO2, Co(93)Fe(7)/SiO2, and Ni(19)Co(77)Fe(4)/SiO2 nanocomposites (NCs) were prepared using highly dispersed silica. It was modified by...     

On singularity and fine spectral structure of random continued fractions

We study properties of the distribution of a random variable of the continued fraction form where are independent and not necessarily identically distributed random variables. We prove the singularity of and study the fine spectral structure of such measures.     

Thermodynamic properties of 5(nitrophenyl) furan-2-carbaldehyde isomers

Background

The aim of the current work was to determine thermo dynamical properties of 5(2-nitro phenyl)-furan-2-carbaldehyde, 5(3-nitro phenyl)-furan-2-carbaldehyde and 5(4-nitro phenyl)-furan-2-carbaldehyde.

Results

The temperature dependence of saturated vapor pressure of 5(2-nitro phenyl)-furan-2-carbaldehyde, 5(3-nitro phenyl)-furan-2-carbaldehyde and 5(4-nitro phenyl)-furan-2-carbaldehyde was determined by Knudsen’s effusion method. The results are presented by the Clapeyron–Clausius equation in linear form, and via this form, the standard enthalpies, entropies and Gibbs energies of sublimation and evaporation of compounds were calculated at 298.15 K. The standard molar formation enthalpies of compounds in crystalline state at 298.15 K were determined indirectly by the corresponding standard molar combustion enthalpy, obtained using bomb calorimetry combustion.

Conclusions

Determination of the thermodynamic properties for these compounds may contribute to solving practical problems pertaining optimization processes of their synthesis, purification and application and it will also provide a more thorough insight regarding the theoretical knowledge of their nature.

Open image in new window

Graphical abstract: Generalized structural formula of investigated compounds and their formation enthalpy determination scheme in the gaseous state