Os(II)-nitrosyl and Os(II)-dinitrogen complexes from reactions between Os(VI)-nitrido and hydroxylamines and methoxylamines

Reactions between the Os(VI)-nitrido salts (e.g., trans-[Os(VI)(tpy)(Cl)(2)(N)]PF(6) (tpy = 2,2':6',2"-terpyridine), cis-[Os(VI)(tpy)(Cl)(2)(N)]PF(6), and fac-[Os(VI)(tpm)(Cl)(2)(N)]PF(6) (tpm = tris(pyrazol-1-yl)methane)) and the hydroxylamines (e.g., H(2)NOH and MeHNOH) and the methoxylamines (e.g., H(2)NOMe and MeHNOMe) in dry MeOH at room temperature give three different types of products. They are Os(II)-dinitrogen (e.g., trans-, cis-, or fac-[Os(II)-N(2)]), Os(II)-nitrosyl [Os(II)-NO](+) (e.g., trans- or cis-[Os(II)-NO](+)), Os(IV)-hydroxyhydrazido (e.g., cis-[Os(IV)-N(H)N(Me)(OH)](+)), and Os(IV)-methoxyhydrazido (e.g., trans-/cis-[Os(IV)-N(H)N(H)(OMe)](+), and trans-/cis-[Os(IV)-N(H)N(Me)(OMe)](+)) adducts. The products depend in a subtle way on the electron content of the starting nitrido complexes, the nature of the hydroxylamines, the nature of the methoxylamines, and the reaction conditions. Their appearance can be rationalized by invoking the formation of a series of related Os(IV) adducts which are stable or decompose to give the final products by two different pathways. The first involves internal 2-electron transfer and extrusion of H(2)O, MeOH, or MeOMe to give [Os(II)-N(2)]. The second which gives [Os(II)-NO](+) appears to involve seven-coordinate Os(IV) intermediates based on the results of an (15)N-labeling study.     

Determination of90Sr in environmental and biological materials with combined HDEHP solvent extraction-low liquid scintillation counting technique

Low level⁹⁰Sr in environmental and biological samples is determined using a combined HDEHP solvent extraction-liquid scintillation procedure. Yttrium-90 is selectively extracted from nitric acid solution into 5% di(2-ethylhexyl) phosphoric acid (HDEHP) in toluene, and⁹⁰Y in the organic phase is measured directly using an ultra low level liquid scintillation spectrometer.The working program of the Quantulus counter has been optimized. As the counting efficiency using liquid scintillation counting is high and the stripping and precipitation of Yttrium-90 oxalate is omitted, this procedure is simpler and more timesaving than traditional methods. The chemical recoveries of⁹⁰Y were 85.1% for soil, 75.7% for milk and 65.3% for bone. The detection limit is 8 mBq.     

Construction of a thermoanalyzer for DTA-TD-TMAG-T measurements on metals up to 1100 °C

A thermoanalyzer is described for the simultaneous testing of metals and alloys by three methods: differential thermal analysis (DTA), thermal dilatometry (TD) and thermomagnetometry (TMAG). One reference specimen is used as a standard for each of the above kinds of analysis. Measurements can be performed in vacuum or in a static or dynamic atmosphere of gases at any pressure between normal and 5× 10^–5 Torr. The temperature of the sample can be changed linearly in the range 20–1100 °C. DTA and TD are performed classically, whereas TMAG is based on the temperature and magnetic field-dependences of the reversible magnetic susceptibility of the sample. Some analysis results are presented.

---

Zusammenfassung Es wird ein Thermoanalysator zur simultanen Untersuchung von Metallen und Legierungen durch drei Methoden beschrieben: Differentialthermoanalyse (DTA), Thermodilatometrie (TD) und Thermomagnetometrie (TMAG). Für alle drei Verfahren wurde die gleiche Referenzsubstanz als Standard benutzt. Messungen können im Vakuum oder is statischer bzw. bewegter Atmosphäre von Gasen beliebigen Druckes zwischen Normaldruck und 5·10^–5 Torr durchgeführt werden. Die Temperatur der Probe kann zwischen 20 und 1100 °C linear variiert werden. Während DTA und TG die herkömmlichen Verfahren zu Grunde liegen, basiert TMAG auf der Temperatur- und Magnetfeldabhängigkeit der reversiblen magnetischen Suszeptibilität der Probe. Einige Analysenergebnisse wurden dargestellt.

---

: (), () (). . , 5·10^–5 . 20–1100°. , . .

---

---

Presented at the 4th European Symposium on Thermal Analysis and Calorimetry, Jena, GDR, August 1987.     

Comparison of microemulsion electrokinetic chromatography and micellar electrokinetic chromatography methods for the analysis of phenolic compounds

In this study, microemulsion electrokinetic chromatography (MEEKC) and micellar electrokinetic chromatography (MEKC) were compared for their abilities to separate and detect thirteen phenolic compounds (syringic acid, p-coumaric acid, vanillic acid, caffeic acid, gallic acid, 3,4-dihydroxybenzoic acid, 4-hydroxybenzoic acid, (+)-catechin, (-)-epigallocatechin, (-)-epicatechin gallate, (-)-epigallocatechin gallate, (-)-epicatechin, and (-)-gallocatechin), and two other ingredients (caffeine and theophylline) in teas and grapes. Separation of phenolic compounds was improved by changing the SDS concentration for MEEKC, but the SDS concentration rarely affected the resolution for MEKC. Organic modifier (acetonitrile or methanol) was found to markedly influence the resolution and selectivity for both MEEKC and MEKC systems. In addition, a higher voltage and a higher column temperature improved the separation efficiency without any noticeable reduction in resolution for MEEKC whereas they caused a poor resolution for the MEKC system. Although separations with baseline resolution were achieved by the optimized MEEKC and MEKC methods, the separation selectivity resulting from the proposed MEEKC method was completely different from that of MEKC.     

Oliveridepsidones A–D,antioxidant depsidones from Garcinia oliveri

Four new prenylated depsidones, oliveridepsidones A–D, were isolated from the bark of Garcinia oliveri collected in Vietnam. Their structures were elucidated using mainly NMR techniques (¹H and ¹³C NMR, HMQC, HMBC and NOE experiments). Copyright © 2012 John Wiley & Sons, Ltd.     

A ghost-cell immersed boundary method for large-eddy simulations of compressible turbulent flows

A methodology to perform a ghost-cell-based immersed boundary method (GCIBM) is presented for simulating compressible turbulent flows around complex geometries. In this method, the boundary condition on the immersed boundary is enforced through the use of ‘ghost cells’ that are located inside the solid body. The computations of variables on these ghost cells are achieved using linear interpolation schemes. The validity and applicability of the proposed method is verified using a three-dimensional (3D) flow over a circular cylinder, and a large-eddy simulation of fully developed 3D turbulent flow in a channel with a wavy surface. The results agree well with the previous numerical and experimental results, given that the grid resolution is reasonably fine. To demonstrate the capability of the method for higher Mach numbers, supersonic turbulent flow over a circular cylinder is presented. While more work still needs to be done to demonstrate higher robustness and accuracy, the present work provides interesting insights using the GCIBM for the compressible flows.     

Organic Positive Materials for Magnesium Batteries: A Review

Magnesium batteries, like lithium-ion batteries, with higher abundance and similar efficiency, have drawn great interest for large-scale applications such as electric vehicles, grid energy storage and many more. On the other hand, the use of organic electrode materials allows high energy-performance, metal-free, environmentally friendly, versatile, lightweight, and economically efficient magnesium storage devices. In particular, the structural diversity and the simple activity of organic molecules make redox properties, and hence battery efficiency, easy to monitor. While organic magnesium batteries still in their infancy, this field becomes more and more promising because significant results were reported. To summarize the achievements in studies on organic cathodes for magnesium systems, their synthesis is discussed, combined with electrode design to provide the basis for controlling the electrochemical properties. Moreover, the techniques to synthesize organic materials with high-yield are mentioned. Finally, potential problems and prospects are explored to further improve organic cathodes.     

Uncovering the Stoichiometry of Pyrococcus furiosus RNase P,a Multi‐Subunit Catalytic Ribonucleoprotein Complex,by Surface‐Induced Dissociation and Ion Mobility Mass Spectrometry

We demonstrate that surface‐induced dissociation (SID) coupled with ion mobility mass spectrometry (IM‐MS) is a powerful tool for determining the stoichiometry of a multi‐subunit ribonucleoprotein (RNP) complex assembled in a solution containing Mg²⁺. We investigated Pyrococcus furiosus (Pfu) RNase P, an archaeal RNP that catalyzes tRNA 5′ maturation. Previous step‐wise, Mg²⁺‐dependent reconstitutions of Pfu RNase P with its catalytic RNA subunit and two interacting protein cofactor pairs (RPP21⋅RPP29 and POP5⋅RPP30) revealed functional RNP intermediates en route to the RNase P enzyme, but provided no information on subunit stoichiometry. Our native MS studies with the proteins showed RPP21⋅RPP29 and (POP5⋅RPP30)₂ complexes, but indicated a 1:1 composition for all subunits when either one or both protein complexes bind the cognate RNA. These results highlight the utility of SID and IM‐MS in resolving conformational heterogeneity and yielding insights on RNP assembly.     

The Influence of Dopant Concentration on Optical-Electrical Features of Quantum Dot-Sensitized Solar Cell

In this study, TiO₂/CdS/Cd_xCu_1−xSe, TiO₂/CdS/Cd_xMn_1−xSe, and TiO₂/CdS/Cd_xAg_2−2xSe thin films were synthesized by chemical bath deposition for the fabrication of photoanode in quantum-dot-sensitized solar cells. As a result, the structural properties of the thin films have been studied by X-ray diffraction, which confirmed the zinc Blende structure in the samples. The optical films were researched by their experimental absorption spectra with different doping concentrations. Those results were combined with the Tauc correlation to estimate the absorption density, the band gap energy, valence band and conduction band positions, steepness parameter, and electron–phonon interaction. Furthermore, the electrical features, electrochemical impedance spectrum and photocurrent density curves were carried out. The result was used to explain the enhancing performance efficiency.