Oxysulfide Sm(2)Ti(2)S(2)O(5) as a stable photocatalyst for water oxidation and reduction under visible light irradiation (lambda < or = 650 nm)

A Ti-based oxysulfide, Sm(2)Ti(2)S(2)O(5), was studied as a visible light-driven photocatalyst. Under visible light (440 nm < or = lambda < or = 650 nm) irradiation, Sm(2)Ti(2)S(2)O(5) with a band gap of approximately 2 eV evolved H(2) or O(2) from aqueous solutions containing a sacrificial electron donor (Na(2)S-Na(2)SO(3) or methanol) or acceptor (Ag(+)) without any noticeable degradation. This oxysulfide is, therefore, a stable photocatalyst with strong reduction and oxidation abilities under visible-light irradiation. The electronic band structure of Sm(2)Ti(2)S(2)O(5) was calculated using the plane-wave-based density functional theory (DFT) program. It was elucidated that the S3p orbitals constitute the upper part of the valence band and these orbitals make an essential contribution to the small band gap energy. The conduction and valence bands' positions of Sm(2)Ti(2)S(2)O(5) were also determined by electrochemical measurements. It indicated that conduction and valence bands were found to have satisfactory potentials for the reduction of H(+) to H(2) and the oxidation of H(2)O to O(2) at pH = 8. This is consistent with the results of the photocatalytic reactions.     

Isolation and Stereostructures of Dolastatin G and Nordolastatin G, Cytotoxic 35-Membered Cyclodepsipeptides from the Japanese Sea Hare Dolabella auricularia

A bioassay-directed fractionation of the cytotoxic constituents of the Japanese sea hare Dolabella auricularia resulted in the isolation of two 35-membered depsipeptides dolastatin G (1) and nordolastatin G (2), which showed cytotoxicity against HeLa S(3) cells with IC(50) values of 1.0 and 5.3 &mgr;g/mL, respectively. The gross structures of these substances were established by spectroscopic analysis including 2D NMR techniques. The absolute stereostructure of 1 was determined by chiral HPLC analysis of amino acid components obtained from acid hydrolysis of 1 and by the enantioselective syntheses of two degradation products arising from polyketide portions. Nordolastatin G (2) is a congener that has the same absolute stereochemistry as that of 1.     

Rapid oligosaccharide synthesis using a fluorous protective group

The Bfp-OH, a novel fluorous protecting reagent, was able to be easily prepared. The Bfp group was readily introduced to a carbohydrate, removed in high yield, and recyclable after cleavage. The use of the Bfp group made it possible to synthesize a pentasaccharide by minimal column chromatography purification. Each synthetic intermediate was able to be easily purified only by simple fluorous-organic solvent extraction and monitored by TLC, NMR, and MS.     

Rapid synthesis of oligosaccharide moieties of globotriaosylceramide using fluorous protective group

The use of the Bfp (bisfluorous chain type propanoyl) group as a fluorous protective group made it possible to rapidly synthesize galabiose and the Gb3 oligosaccharide derivatives by a simple fluorous-organic extraction purification. The fluorous oligosaccharide synthesis using the Bfp group is an excellent strategic alternative to solid phase oligosaccharide synthesis, and removes some of the disadvantages of the solid phase method.     

Alkenylation of thiophenes at the 2-position with magnesium alkylidene carbenoids

Treatment of magnesium alkylidene carbenoids, generated from 1-chlorovinyl p-tolyl sulfoxides with isopropylmagnesium chloride at −78 °C in toluene, with 2-lithiothiophenes gave 2-alkenylated thiophenes in good to high yields. The intermediate of this reaction was found to be an alkenylmagnesium, which could be trapped with iodoalkanes and ethyl chloroformate. This procedure offers a novel and efficient one-pot synthesis of thiophenes having a disubstituted or a trisubstituted olefin at the 2-position from thiophenes in good yields.     

Electrochemical characterization of negative electrodes consisting of surface-modified Zr0.9Ti0.1(Ni1.1Co0.1Mn0.5V0.2Cr0.1)x Laves-phase alloys

Laves-phase hydrogen storage alloy has a high potential for use as negative electrode material as alternative for the misch-metal-based material. In order to improve the energy density and the rate capability of negative electrode, chemical and mechanical modification of Lavesphase alloy with different stoichiometric ratios was carried out. Discharge capacity and high-rate dischargeabilty was evaluated by electrochemical methods and the characterization of Laves-phase alloy was made by X-ray diffraction, SEM observation and PCT measurement. The best result in discharge capacity could be obtained for stoichiometric Laves-phase alloy with a composition of Zr_0.9Ti_0.1Ni_1.1Co_0.1Mn_0.5V_0.2Cr_0.1 by boiling in 10 M KOH solution. On the other hand, the high-rate dischargeability was increased remarkably by introducing mechanical grinding before alkali treatment. The cause for improved performance was discussed on the basis of thermodynamic stability of metal hydride and changes in crystal structure and surface morphology influencing on diffusion coefficient and diffusion path length of hydrogen.     

Electrochemical synthesis of a polypyrrole thin film with supercritical carbon dioxide as a solvent

A conductive polypyrrole (PPy) film was successfully synthesized in a homogeneous supercritical carbon dioxide (scCO2)/acetonitrile (AN) system. The occurrence of a homogeneous supercritical state was confirmed by observations of the phase behavior of the system through a high-pressure cell with a viewing window. The concentration of a supporting electrolyte, tetrabutylammonium hexafluorophosphate (TBAPF6), significantly changed the phase behavior of the scCO2/AN system. The polymerization rate of the film in that system decreased with further addition of CO2. This result suggested that the low viscosity of scCO2 did not play an important role in improving the growth rate of the PPy film. The low polymerization rate might have been due to the electron-transfer resistance arising from the low dielectric constant of scCO2/AN mixture. The roughness of the film prepared in the homogeneous scCO2/AN system was 1/10 that synthesized in AN itself as a solvent. The slow growth of film and the high diffusion rate of the monomer seemed to account for the smooth flat film formation.     

A synthesis, including asymmetric synthesis, of α-quaternary α-amino aldehydes from ketones and chloromethyl p-tolyl sulfoxide via sulfinylaziridines

Treatment of 1-chlorovinyl p-tolyl sulfoxides, prepared from ketones and chloromethyl p-tolyl sulfoxide, with N-lithio arylamines resulted in the formation of sulfinylaziridines in good to high yields. The sulfinylaziridines were treated with N-lithio aniline or N-lithio p-chloroaniline to afford α-quaternary α-amino aldehydes in good yields. From α-quaternary α-amino aldehydes, α-quaternary α-amino acid esters and β-quaternary β-amino alcohols were obtained. When optically active chloromethyl p-tolyl sulfoxide was used in this procedure, a method for the synthesis of optically active α-quaternary α-amino aldehydes was realized. The reaction mechanism, including asymmetric induction, for the formation of the sulfinylaziridines is described.     

A new synthesis, including asymmetric synthesis, of spiro[4.n]alkenones from three components: cyclic ketones, chloromethyl p-tolyl sulfoxide, and acetonitrile; and a formal total synthesis of racemic acorone

1-Chlorovinyl p-tolyl sulfoxides were synthesized from several kinds of cyclic ketones and chloromethyl p-tolyl sulfoxide in good yields. Treatment of the 1-chlorovinyl p-tolyl sulfoxides with cyanomethyllithium at −78°C to room temperature gave spirocyclic enaminonitriles in high yields. Acidic treatment of the enaminonitriles afforded spiro[4.n]alkenones in good yields. By using an unsymmetrical cyclic ketone, α-tetralone, and optically active chloromethyl p-tolyl sulfoxide, this procedure afforded enantiomerically pure spiro[4.5]decenone in good yield with excellent asymmetric induction from the sulfoxide chiral center. By using this method a formal total synthesis of a racemic spirocyclic sesquiterpene, acorone, was realized.     

Reactivity and catalytic activity of cationic lonomers for the nucleophilic substitution reactions

Polystyrene-based crosslinked cationic ionomers containing ammonium or phosphonium chlorides (AxRCI and PxBuCI) were reacted with decyl methanesulfonate. The kinetic data were correlated with the swelling behavior of the ionomers and the solution viscosity of the corresponding linear ionomers. The reactivity of the ionomers was independent of the particle size of the ionomer beads, indicating no diffusion control of the reaction. The solvent and the ion content of the ionomers greatly affect the reactivity. In nonpolar solvents with a low acceptor number, A_N, such as toluene, the aggregation of ionic groups with an increasing ion content reduces the reactivity. A solvent with a high value of A_N, such as chloroform, led a very low reactivity independent of the ion content. Aprotic polar solvent, such as acetonitrila, promoted the dissociation of the ionic groups and furnished a relatively high reactivity independent of the ion content. Several catalytic substitution reactions were carried out under liquid-solid-solid triphase conditions. The kinetic results were accounted for in terms of slow nucleophile transport and fast chemical reaction within the ionomer particles. © 1994 John Wiley & Sons, Inc.