ELECTRORHEOLOGICAL PROPERTIES OF POLYANILINE/PUMICE COMPOSITE SUSPENSIONS

Electrorheological （ER） properties of polyaniline （PAni）, pumice and polyaniline/pumice composites （PAPC） were investigated. Polyaniline and PAni/pumice composite were prepared by oxidative polymerization. PAni/pumice particlesbased ER suspensions were prepared in silicone oil （SO）, and their ER behavior was investigated as a function of shear rate, electric field strength, concentration and temperature. Sedimentation stabilities of suspensions were determined. It has been found that ER activity of all the suspensions increases with increasing electric field strength, concentration and decreasing shear rate. It has shown that the suspensions have a typical shear thinning non-Newtonian viscoelastic behavior. Yield stress of composite suspensions increased linearly with increasing applied electric field strength and with concentrations of the particles. The effect of high temperature on ER activity of purrfice/silicone oil systems was also investigated.     

Synthesis of 2-ferrocenylidene-4-cyclopentene-1,3-diones

A squarate-based synthesis of 2-ferrocenylidene-4-cyclopentene-1,3-diones is described. When refluxed in dioxane at 100 °C, heated with silica gel as a solvent free grinded solid mixture at 125 °C or stirred with silica gel in ethyl acetate at room temperature, 4-ferrocenylethynyl-4-hydroxy-2-cyclobutenones, prepared from ethynylferrocene and 3-cyclobutene-1,2-diones, afforded 2-ferrocenylidene-4-cyclopentene-1,3-diones as the major or single product of the reaction. In some cases, ferrocenyl quinones also resulted from these reactions as the minor products. The major or exclusive formation of 2-ferrocenylidene-4-cyclopentene-1,3-diones is attributed to the radical-stabilizing ability of the ferrocenyl group.     

The Synthesis of Novel Methotrexate-like Compounds

Summary. Methotrexate (MTX) is a folate antagonist used in treatment of several chronic inflammatory and neoplastic conditions. In this study, new MTX-like compounds that may-be potential anticancer agents were synthesized and their structures were determined by IR, UV, GC-MS, ¹H NMR, and ¹³C NMR spectra. Also, in this study, a series structurally related to MTX or folate analogous compounds were evaluated whether they have inhibitory properties on the dihydrofolate reductase activity (DHFR).     

Synthesis and Antibacterial Activity of Some Substituted 3-(Aryl)- and 3-(Heteroaryl)indoles

Summary. A synthesis of 3-(4-methoxycarbonyl-2,6-dinitrophenyl)indole, its 2,6-diamino analog, and 3-(2-amino-4-trifluoromethyl-6-nitrophenyl)indole is described. 4-(Trifluoromethyl)phenyl derivatives exhibit higher antibacterial potency than the former 4-(methoxycarbonyl)phenyl homologs, while 3-(4-trifluoromethyl-2-nitrophenyl)indole was the most active agent in the series, with MIC ≈ 7 μg/cm³ against E. coli and S. aureus.     

Perfluoroalkylated eight- and nine-membered benzoheterocycles from F-2-methyl-2-pentene

The reactions of $\text{F}$-2-methyl-2-pentene (1) with several $\text{ortho}$- difunctional benzenes afforded eight- and nine-membered benzoheterocyclic compounds carrying perfluoroalkyl groups. Salicylic acid, salicylaldehyde, and their methyl or chloro derivatives reacted in triethylamine-acetonitrile system giving perfluoroalkylated 2H,6H-1,5-benzodioxocin-2,6-dione (8) and 4H,6H-1,5-benzodioxocin (9) compounds respectively, while phthalyl alcohol and o-hydroxyphenethyl alcohol in triethylamine-diethyl ether system gave perfluoroalkylated 1H,3H,7H-2,6- and 4H,6H,7H-1,5-benzodioxonin compounds, (10) and (11). o-Aminobenzyl alcohol and (1) in diethyl ether afforded a perfluoroalkylated benzoxazocinobenzoxazocinone compound (15).     

Studies on platinum(II) and palladium(II) complexes of some N,N′-disubstituted thiourea derivatives

Summary A series of new Pt^II and Pd^II complexes of N,N-disubstituted thiourea derivatives of general formulae [MLCl₂]₂, [ML₂Cl₂] and [ML₄]Cl₂ have been prepared and characterised by physicochemical and spectroscopic methods. The reaction of these ligands with [M(DMSO)₂Cl₂], M = Pt, cis- or Pd, trans-, in CHCl₃ and EtOH at ambient temperature or under reflux, is described.     

Factorial design in the optimization of preconcentration procedure for lead determination by FAAS

The present paper proposes a preconcentration procedure for lead determination using flame atomic absorption spectrometry (FAAS). It is based on lead(II) ions extraction as brilliant cresyl blue (BCB) complex and its sorption onto Diaion HP-2MG, a methacrylic ester copolymer. The optimization step was carried out using factorial design and the variables studied were pH, shaking time and reagent concentration. In the established experimental conditions, lead can be determinate with a limit of detection of 3.7 μg L⁻¹ lead (N = 20) and a relative standard deviation of 7% for a lead concentration of 100 μg L⁻¹. The accuracy was confirmed by analysis of a certified reference material, the stream sediment furnished by National Research Centre for Certified Reference Materials (NRCCRM), China (GBW 07310). Effect of other ions in the procedure proposed was also studied. The method was applied for lead determination in real samples of water, tea, soil and dust. Tests of addition/recovery in the experiments for lead determination in water samples revealed that the proposed procedure could be applied satisfactorily for analysis of these samples.     

Reactions of 1S, 1D,and 3P carbon atoms with water. Oxygen abstraction and intermolecular formaldehyde generation mechanisms; An MCSCF study

Reactions of singlet and triplet carbon atoms with water are explored theoretically using CASSCF–MCQDPT2, CCSD, and DFT methodologies. The ¹S carbons are found to be unreactive. Depending on the carbon atom generation method and the reaction medium, gas‐phase C(³P) attacking water may generate CO and atomic hydrogen as the end products. Reaction paths of the C(¹D) + H₂O system are complicated due to the involvement of two reactive potential energy surfaces with branchings occurring along each. Modifications in product distributions for reactions taking place in condensed phases are elaborated. The decisive reaction conditions, under which the oxygen abstraction and intermolecular formaldehyde generation dominate, are suggested to clarify the discrepancy related with experimental CO observation. The findings are consistent with available experimental data on this system. Oxygen abstraction and intermolecular formaldehyde generation mechanisms suggested here are capable of serving as models for similar reactions of alcohols. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Melting heat transfer in the stagnation‐point flow of an upper‐convected Maxwell (UCM) fluid past a stretching sheet

The steady laminar boundary layer flow and heat transfer past a stretching sheet arre considered. Upper‐convected Maxwell (UCM) fluid is treated as a rheological model. The resulting nonlinear differential system is solved by homotopy analysis method (HAM). The influence of melting parameter (M), Prandtl number (Pr), Deborah number (β) and stretching ratio (A = a/c) on the velocity and temperature profiles is thoroughly examined. It is noticed that fields are effected appreciably with the variation of parameters. Furthermore, it is seen that the local Nusselt number is a decreasing function of melting parameter. Copyright © 2011 John Wiley & Sons, Ltd.     

Approximation of transformation media-based reshaping action by genetic optimization

The aim of this paper is to study the laser-induced backside wet cleaning techniques for glass substrates. Two kinds of laser cleaning techniques are proposed in this study. The first involves applying an Nd:YAG laser to the backside of the substrate which is submerged in water. A metal plate is placed below the glass substrate. Most of the laser energy will be absorbed by the metal plate. The metal then vaporizes the water and generates a turbulent bubble flow. The bubble flow removes the alumina particles from the surface of the glass substrate. The second involves using a CO₂ laser to generate turbulent bubble flow to remove the particles. Both methods were successfully demonstrated for the removal of submicron particles of 0.5 μm in size. The phenomena of bubble generation and diffusion are presented in the paper. Because the laser is applied to the backside of the substrate, the damage due to the laser heat can be significantly reduced. The quality and efficient of the backside processing is better than those of the front side processing. The proposed techniques have great potential to provide an improved solution for glass cleaning.