Effect of Temperature on Cd2+ Sorption by Mixed Oxides of Iron and Silicon

The current study focuses on the synthesis and sorption properties of two mixed oxides of iron and silicon prepared by physical mixing (M₁) and sequential precipitation methods (M₂). Both the mixed oxides were synthesized from equimolar ratios of Fe(OH)₃ and SiO₂ and characterized for surface area, EDX, XRD and PZC. The surface area, micropore volume and average pore width of the oxide M₁ were higher as compared to the oxide M₂. However, potentiometric titrations revealed that mixed oxide synthesized by this method had a very high capacity towards Cd²⁺ ions as compared to the mixed oxide M₁. Sorption of Cd²⁺ ions at pH 5 on mixed oxide, M₂ was found to increase with temperature in the range 288 to 318 K. Langmuir equation was found applicable to the sorption data with R²>0.99. Entropy (ΔS^?), enthalpy (ΔH^?) and free energy changes (ΔG^?) were calculated which revealed the process to be endothermic and spontaneous in nature.     

Dynamic magnetic properties of the kinetic cylindrical Ising nanotube

The nature (time variation) of response magnetizations m(wt) of the kinetic cylindrical Ising nanotube in the presence of a periodically varying external magnetic field h(wt) is studied by employing the effective-field theory (EFT) with correlations as well as the Glauber-type stochastic dynamics. We have determined the time variations of m(wt) and h(wt) for various temperatures, and investigated the dynamic magnetic hysteresis behavior. Temperature dependence of the dynamic magnetizations, hysteresis loop areas and correlations are investigated in order to characterize the nature (first- or second-order) of the dynamic transitions as well as to obtain the dynamic phase transition temperatures. We also present the dynamic phase diagrams in the three different planes and compare the results of the equilibrium and nonequilibrium states. The phase diagrams exhibit dynamic tricritical, isolated critical, multicritical and triple points. The results are in good agreement with some experimental and theoretical results.     

Synthesis of Cycloalk[b]indole Bearing Spiropiperidine Derivatives

The novel heterocyclic compounds that have cycloalk[b]indole moiety bearing spiropiperidinone and spiropiperidinedione ( 3a , 3b , 3c , 5a , 5b , 8a , 8b , and 10a ) were synthesized for the first time. The synthesis of spiropiperidinone and spiropiperidinedione structures was performed by a new method. These compounds are similar to sedative and hypnotic drugs such as methyprylon, glutethimide, and thalidomide.     

Biosynthesis of silver nanoparticles using Onosma sericeum Willd. and evaluation of their catalytic properties and antibacterial and cytotoxic activity

In this study, silver nanoparticle (AgNP) synthesis was carried out using Onosma sericeum Willd. aqueous extract for the first time, with a simple, economical, and green method without the need for any other organic solvent or external reducing or stabilizing agent. A variety of AgNPs, all of different particle sizes, were synthesized by controlling the silver ion concentration, extract volume, temperature, and pH. It was determined that the optimum conditions for AgNP synthesis were 1 mM AgNO3, pH 8, 25 °C, 20 g/200 mL extract, silver nitrate, and extract ratio 5:1 (v/v). The AgNPs were defined using UV-Vis spectroscopy, field emission scanning electron microscopy (FESEM), energy dispersive X-ray analysis (EDAX), transmission electron microscopy (TEM), and X-ray diffraction (XRD). The particle size distribution and zeta potential measurements of the AgNPs were measured using the dynamic light scattering (DLS) technique. It was determined that the AgNPs with a particle size of less than 10 nm showed a higher catalytic effect in the reduction of 2-nitrobenzenamine. It was also found that these nanoparticles had a cytotoxic effect on the MCF-7 breast cancer cell line depending on dosage and time. The resulting IC50 values were between 76.63 µg/mL and 169.77 µg/mL. Furthermore, the biosynthesized AgNPs showed effective antibacterial activity against the Acinetobacter baumannii bacteria. The results of the study showed that synthesized AgNPs can have a promising role in biomedical and nanobiotechnology applications.     

Synthesis,Characterization and Electrorheological Properties of Polyindene/Kaolinite Composites

In this study, synthesis, characterization and electrorheological (ER) properties of polyindene (PIN) and polyindene/kaolinite composites were carried out by cationic radical polymerization using FeCl₃ as the oxidizing agent. The homopolymer and composites, containing different amounts of PIN were characterized by FTIR spectroscopy, thermo‐gravimetric (TGA) analyses, scanning electron microscopy (SEM) and dynamic light scattering (DLS) methods. The conductivity and dielectric properties of PIN and PIN/kaolinite composites were determined. Suspensions of PIN and PIN/kaolinite composites were prepared in silicone oil (SO), at a series of concentrations (c=5–25 m/m %). The effects of concentration, shear rate, electric field strength, frequency, temperature and promoter on ER activities of suspensions were investigated.     

Preparation of calix[4]arene-based sporopollenin and examination of its dichromate sorption ability

The present study describes the preparation of a new calix[4]arene-based sporopollenin material and its application for the removal of Na₂Cr₂O₇ from aqueous solution. The novel calix[4]arene-based sporopollenin material was prepared via the immobilization of dihydrazine amide derivative of p-tert-butylcalix[4]arene (3) onto the modified sporopollenin. The newly prepared calix[4]arene-based sporopollenin is characterized by using different analytical techniques such as FT-IR spectroscopy, scanning electron microscope and Elemental analysis. The batch wise sorption study was carried out to optimize various experimental parameters such as the effect of sorbent dosage, pH, temperature and Cr(VI) anion concentration. It has been found that the sorption of Cr(VI) anion on calix[4]arene-based sporopollenin was highly pH dependent and maximum sorption was achieved at pH 1.5. The sorption behavior was also evaluated by Langmuir, Freundlich and Dubinin Radushkevich isotherms. The value of correlation coefficient (R ²) showed a good agreement with Freundlich isotherm model. Result of study demonstrated that calix[4]arene-based sporopollenin proved to be highly effective for the removal of Cr(VI).     

Adsorption and inhibitive properties of aminobiphenyl and its Schiff base on mild steel corrosion in 0.5 M HCl medium

Electrochemical measurements were performed to investigate the effectiveness and adsorption behaviour of aminobiphenyl (Aph) and 2-(3-hydroxybenzylideneamino)biphenyl (Aph-S), as corrosion inhibitors for mild steel (MS) in 0.5 M HCl solution. Potentiodynamic polarization, linear polarization resistance (LP) and electrochemical impedance spectroscopy (EIS) techniques were applied to study the metal corrosion behaviour in the absence and presence of different concentrations of Aph and Aph-S. In order to gain more information about adsorption mechanism the AC impedance technique was used to evaluate the potential of zero charge (PZC) from polarization resistance (R_p) versus voltage (E) plot. Potentiodynamic polarization measurements showed that Aph act as cathodic type inhibitor where as Aph-S act mixed type. The inhibition efficiency (IE%) increases with increasing concentration of compounds and reached 92.6% for Aph and 97.2% for Aph-S at 5 × 10⁻³ M. Double layer capacitance (C_dl) and polarization resistance (R_p) values are derived from Nyquist plots obtained from AC impedance studies. The experimental data fit Langmuir isotherm for both Aph and Aph-S, and from the adsorption isotherm some thermodynamic data for the adsorption processes are calculated and discussed. The effect of exposure time on the corrosion behaviour of mild steel in the absence and presence of inhibitor over 168 h was also studied.     

Oscillation criteria for second order nonlinear neutral differential equations

By refining the standard integral averaging technique, we obtain new oscillation criteria for a class of second order nonlinear neutral differential equations of the form

(r(t)(x(t)+p(t)x(t-τ))^′)^′+q(t)f(x(t),x(σ(t)))=0.     

The uses of 1-(2-pyridylazo) 2-naphtol (PAN) impregnated Ambersorb 563 resin on the solid phase extraction of traces heavy metal ions and their determinations by atomic absorption spectrometry

1-(2-pyridylazo) 2-naphtol (PAN) impregnated Ambersorb 563 resin was used as solid phase extractor of copper, nickel, cadmium, lead, chromium and cobalt ions in aqueous solutions prior to their atomic absorption spectrometric determinations. The parameters including pH, sample volume, matrix effects were also investigated. The relative standard deviation (R.S.D.) of the combined method of sample treatment, preconcentration and determination with atomic absorption spectrometry is generally lower than 10%. The limit of detection was between 0.21 and 1.4 μg l⁻¹. The results were used for preconcentration of analyte ions from natural water samples. The method was also applied to a stream sediment standard reference material (GBW7309) for the determination of Cu, Ni, Cd, Pb, Cr and Co.     

Combination of cloud point extraction and flame atomic absorption spectrometry for preconcentration and determination of trace iron in environmental and biological samples

In the presented work, the conditions for cloud point extraction of iron from aqueous solutions using 7-iodo-8-hydroxyquinolin-5-sulphonic acid (Ferron) was investigated and optimized. The procedure is based on the separation of its ferron complex into the micellar media by adding the surfactant Triton X-114. After phase separation, the surfactant-rich phase was dissolved with 1.0 M HNO3 in methanol. Iron was determined by flame atomic absorption spectrometry. Optimization of the pH, ligand and surfactant quantities, incubation time, temperature, viscosity, sample volume, and interfering ions were investigated. The effects of the matrix ions were also examined. The detection limits for three times the standard deviations of the blank for iron was 0.4 ng m L-1, enrichment factor of 19.6 and preconcentration factor of 30 could be achieved. The validity of cloud point extraction was checked by employing real samples including soil, blood, spinach, milk, meat, liver and orange juice samples using the standard addition method, which gave satisfactory results.In the presented work, the conditions for cloud point extraction of iron from aqueous solutions using 7-iodo-8-hydroxyquinolin-5-sulphonic acid (Ferron) was investigated and optimized. The procedure is based on the separation of its ferron complex into the micellar media by adding the surfactant Triton X-114. After phase separation, the surfactant-rich phase was dissolved with 1.0 M HNO₃ in methanol. Iron was determined by flame atomic absorption spectrometry. Optimization of the pH, ligand and surfactant quantities, incubation time, temperature, viscosity, sample volume, and interfering ions were investigated. The effects of the matrix ions were also examined. The detection limits for three times the standard deviations of the blank for iron was 0.4 ng m L⁻¹, enrichment factor of 19.6 and preconcentration factor of 30 could be achieved. The validity of cloud point extraction was checked by employing real samples including soil, blood, spinach, milk, meat, liver and orange juice samples using the standard addition method, which gave satisfactory results.