Approximation of transformation media-based reshaping action by genetic optimization

The aim of this paper is to study the laser-induced backside wet cleaning techniques for glass substrates. Two kinds of laser cleaning techniques are proposed in this study. The first involves applying an Nd:YAG laser to the backside of the substrate which is submerged in water. A metal plate is placed below the glass substrate. Most of the laser energy will be absorbed by the metal plate. The metal then vaporizes the water and generates a turbulent bubble flow. The bubble flow removes the alumina particles from the surface of the glass substrate. The second involves using a CO₂ laser to generate turbulent bubble flow to remove the particles. Both methods were successfully demonstrated for the removal of submicron particles of 0.5 μm in size. The phenomena of bubble generation and diffusion are presented in the paper. Because the laser is applied to the backside of the substrate, the damage due to the laser heat can be significantly reduced. The quality and efficient of the backside processing is better than those of the front side processing. The proposed techniques have great potential to provide an improved solution for glass cleaning.     

Online Solid-Phase Extraction of Cd(II), Cu(II), and Co(II) Using Covalently Attached Bis(salicylaldimine) to Silica Gel for Determination in Food and Water by Flame Atomic Absorption Spectrometry

In this study, a novel sorbent material bearing a bis(aldimine) group was designed and successfully synthesized by covalently bonding a 2-[N,N′-bis(salicylaldimine)]aminoethyl amine ligand to the silica gel surface that was characterized by carbon, hydrogen, and nitrogen elemental analysis, thermogravimetric analysis, and the Fourier transform infrared spectroscopy technique. The sorbent was used for the online solid-phase extraction (SPE) of Cd(II), Cu(II), and Co(II) ions for their determination at trace concentration levels by flame atomic absorption spectrometry. The effective factors for the online SPE such as the pH and the flow rate of the sample solution, and type, volume, and flow rate of eluent were investigated. The concentration levels of Cd(II), Cu(II), and Co(II) were measured in certified reference materials including Virginia tobacco leaves (CTA-VTL-2) and water-trace elements (NWTM-15.2) to validate this method. The metal levels in environmental water were determined by this method, and the values were checked by spiking and recovery experiments and independent analysis by inductively coupled plasma-mass spectrometry. The adsorption capacities of the sorbent were found to be 41.2, 31.6, and 25.6?mg/g for Cd(II), Cu(II), and Co(II), respectively. This method was also successfully used for the determination of Cd(II), Cu(II), and Co(II) concentrations in rice and molasses.     

Chiral 2-(2-hydroxyaryl)alcohols (HAROLs) with a 1,4-diol scaffold as a new family of ligands and organocatalysts

Efficient and modular syntheses of chiral 2-(2-hydroxyaryl)alcohols (HAROLs), novel 1,4-diols carrying one phenolic and one alcohol hydroxyl group, have been developed which led to generation of a small library of structurally diverse HAROLs in enantiomerically pure form. Of the different HAROLs examined, a HAROL based on the indan backbone exhibited the highest activity and enantioselectivity in the 1,2-addition of certain organometallic compounds to aldehydes in the presence of Ti(OⁱPr)₄ (up to 97% y, 88% ee) and performed as a hydrogen-bond donor organocatalyst in the Morita-Baylis-Hillman reaction, promoted by trialkylphosphines.     

Design and construction of an quasi-adiabatic dissolution calorimeter with a novel dosing apparatus and a low heat capacity

A quasi-adiabatic calorimeter for determining the molar solution enthalpies (Δ_sol H) of non-volatile solids was constructed. The design of the instrument was adjusted to allow the determination of solution enthalpies of small amounts of solids. For that purpose, the novel apparatus for sample dosage with virtually negligible “blank heat” was built. The rather low heat capacity of the calorimeter was achieved by reducing the volume of the reaction cell (20 mL), the dosing unit, and electric elements (the thermistor and the heater). Good thermal isolation of the reaction cell from the surroundings was accomplished by placing the cell into an evacuated polypropylene vessel. A computer program for processing the calorimetric data according to modified Regnault–Pfaundler method was written. The performance of the calorimeter was tested by determining the heats of the reactions serving as thermochemical standards at 25 °C (the dissolution of KCl and NaCl in water and the dissolution of tris(hydroxymethyl)-aminomethane in 0.1 mol dm^?3 HCl(aq)). The obtained data were in very good agreement with the literature values.     

A view about the short histories of the mole and Avogadro’s number

The mole and Avogadro’s number are two important concepts of science that provide a link between the properties of individual atoms or molecules and the properties of bulk matter. It is clear that an early theorist of the idea of these two concepts was Avogadro. However, the research literature shows that there is a controversy about the subjects of when and by whom the mole concept was first introduced into science and when and by whom Avogadro’s number was first calculated. Based on this point, the following five matters are taken into consideration in this paper. First, in order to base the subject matter on a strong ground, the historical development of understanding the particulate nature of matter is presented. Second, in 1811, Amedeo Avogadro built the theoretical foundations of the mole concept and the number 6.022 × 10²³ mol^?1. Third, in 1865, Johann Josef Loschmidt first estimated the number of molecules in a cubic centimetre of a gas under normal conditions as 1.83 × 10¹⁸. Fourth, in 1881, August Horstmann first introduced the concept of gram-molecular weight in the sense of today’s mole concept into chemistry and, in 1900, Wilhelm Ostwald first used the term mole instead of the term ‘gram-molecular weight’. Lastly, in 1889, Károly Than first determined the gram-molecular volume of gases under normal conditions as 22,330 cm³. Accordingly, the first value for Avogadro’s number in science history should be 4.09 × 10²² molecules/gram-molecular weight, which is calculated by multiplying Loschmidt’s 1.83 × 10¹⁸ molecules/cm³ by Than’s 22,330 cm³/gram-molecular weight. Hence, Avogadro is the originator of the ideas of the mole and the number 6.022 × 10²³ mol^?1, Horstmann first introduced the mole concept into science/chemistry, and Loschmidt and Than are the scientists who first calculated Avogadro’s number. However, in the science research literature, it is widely expressed that the mole concept was first introduced into chemistry by Ostwald in 1900 and that Avogadro’s number was first calculated by Jean Baptiste Perrin in 1908. As a result, in this study, it is particularly emphasised that Horstmann first introduced the mole concept into science/chemistry and the first value of Avogadro’s number in the history of science was 4.09 × 10²² molecules/gram-molecular weight and Loschmidt and Than together first calculated this number.