Nanoparticle labels have enhanced the performance of diagnostic, screening, and other measurement applications and hold further promise for more sensitive, precise, and cost-effective assay technologies. Nevertheless, a clear view of the biomolecular interactions on the molecular level is missing. Controlling the ratio of molecular recognition over undesired nonspecific adhesion is the key to improve biosensing with nanoparticles. To improve this ratio with an aim to disallow nonspecific binding, a more detailed perspective into the kinetic differences between the cases is needed. We present the application of two novel methods to determine complex binding kinetics of bioconjugate nanoparticles, interferometry, and force spectroscopy. Force spectroscopy is an atomic force microscopy technique and optical interferometry is a direct method to monitor reaction kinetics in second-hour timescale, both having steadily increasing importance in nanomedicine. The combination is perfectly suited for this purpose, due to the high sensitivity to detect binding events and the ability to investigate biological samples under physiological conditions. We have attached a single biofunctionalized nanoparticle to the outer tip apex and studied the binding behavior of the nanoparticle in a sandwich-type immunoassay using dynamic force spectroscopy in millisecond timescale. Utilization of the two novel methods allowed characterization of binding kinetics in a time range spanning from 50 ms to 4 h. These experiments allowed detection and demonstration of differences between specific and nonspecific binding. Most importantly, nonspecific binding of a nanoparticle was reduced at contact times below 100 ms with the solid-phase surface.
Figure A single biofunctionalized nanoparticle was attached to the outer tip apex and the binding behavior of the nanoparticle in a sandwich-type immunoassay, A) without analyte, B) with analyte and C) saturating analyte concentration, was recorded using dynamic force spectroscopy in millisecond timescale. The setting allowed measurement of the association speed of nonspecific binding.
The gas–liquid partitioning behavior of major odorants (acetic acid, propionic acid, isobutyric acid, n-butyric acid, i-valeric acid, n-valeric acid, hexanoic acid, phenol, p-cresol, indole, skatole, and toluene (as a reference)) commonly found in microbially digested wastewaters was investigated by two experimental approaches. Firstly, a simple vaporization method was applied to measure the target odorants dissolved in liquid samples with the aid of sorbent tube/thermal desorption/gas chromatography/mass spectrometry. As an alternative method, an impinger-based dynamic headspace sampling method was also explored to measure the partitioning of target odorants between the gas and liquid phases with the same detection system. The relative extraction efficiency (in percent) of the odorants by dynamic headspace sampling was estimated against the calibration results derived by the vaporization method. Finally, the concentrations of the major odorants in real digested wastewater samples were also analyzed using both analytical approaches. Through a parallel application of the two experimental methods, we intended to develop an experimental approach to be able to assess the liquid-to-gas phase partitioning behavior of major odorants in a complex wastewater system. The relative sensitivity of the two methods expressed in terms of response factor ratios (RFvap/RFimp) of liquid standard calibration between vaporization and impinger-based calibrations varied widely from 981 (skatole) to 6,022 (acetic acid). Comparison of this relative sensitivity thus highlights the rather low extraction efficiency of the highly soluble and more acidic odorants from wastewater samples in dynamic headspace sampling. 相似文献
The construction and electrochemical response characteristics of Poly (vinyl chloride) membrane sensors for moxifloxacin HCl (MOX) are described. The sensing membranes incorporate ion association complexes of moxifloxacin cation and sodium tetraphenyl borate (NaTPB) (sensor 1), phosphomolybdic acid (PMA) (sensor 2) or phosphotungstic acid (PTA) (sensor 3) as electroactive materials.
Results
The sensors display a fast, stable and near-Nernstian response over a relative wide moxifloxacin concentration range (1 × 10-2 - 4.0 × 10-6, 1 × 10-2 - 5.0 × 10-6, 1 × 10-2 - 5.0 × 10-6 M), with detection limits of 3 × 10-6, 4 × 10-6 and 4.0 × 10-6 M for sensor 1, 2 and 3, respectively over a pH range of 6.0 - 9.0. The sensors show good discrimination of moxifloxacin from several inorganic and organic compounds. The direct determination of 400 μg/ml of moxifloxacin show an average recovery of 98.5, 99.1 and 98.6% and a mean relative standard deviation of 1.8, 1.6 and 1.8% for sensors 1, 2 and 3 respectively.
Conclusions
The proposed sensors have been applied for direct determination of moxifloxacin in some pharmaceutical preparations. The results obtained by determination of moxifloxacin in tablets using the proposed sensors are comparable favorably with those obtained using the US Pharmacopeia method. The sensors have been used as indicator electrodes for potentiometric titration of moxifloxacin.
Most of the benzyladenine and furfuryladenine derivatives inhibit tumor/cancer cell growth; their toxicity is lesser than the compounds used for the treatment of cancer now-a-days. Many cytokinin derivatives are tested for anticancer activity.
Results
A series of transition metal complexes containing N6-benzyl/furfuryl aminopurines of formula [Mn(FAH)2(H2O)(Cl3)]2.Cl2(1), [Co(FAH)2(H2O)(Cl3)]2.Cl2(2), [Co(FAH)2(Cl4)]2 .[Co(FAH)2(H3O)(Cl3)].Cl2(3), [Ni(FAH)2(H2O)(Cl3)]2.Cl2. (H2O) (4), [Zn(BAH)Br3] (5) and [Cd2(BAH)2(μ-Br)4Br2]n(6) (where BAH and FAH benzyladeninium and furfuryladeninium cations respectively) have been synthesized and characterized. Crystal structures of (1-4) have similar distorted octahedral coordination geometry, while (5) and (6) have distorted tetrahedral geometry and octahedral geometries respectively. In (1-4) two halide ions and two cytokinin cations (BAH+/FAH+) are laterally coordinated to the metal ion. A water molecule and a halide ion are axially coordinated. But the coordination sphere of (5) consists of N7 coordinated benzyladeninium ion and three halide ions. The complex (6) is a coordination polymer bridged by bromide anions. A common notable feature in (1-4) is the presence of one or more lattice chloride anions. They help in a chain formation by N-H…Cl halide involving hydrogen bonding interactions in between the Hoogsteen site hydrogen.
Conclusions
The observed crystal structures emphasize the role of the halide ions in developing the supramolecular architectures by halide involving hydrogen bonding interactions. Also most of the reported cobalt cytokinin complexes possess tetrahedral coordination geometry, but some cobalt complexes have distorted octahedral coordination geometry, which are discussed and compared.
New vapor-liquid equilibria (VLE) data at 323.15, 333.15, 343.15, and 353.15 K and pressures up to 112.9 bar are reported for the carbon dioxide + 2-methyl-2-propanol system. The experimental method used in this work was a static analytical method with liquid and vapor phases sampling using a rapid online sampler injector (ROLSI?) coupled to a gas chromatograph (GC) for analysis. Measured VLE data and literature data for carbon dioxide + 2-methyl-2-propanol system were modeled with the Soave-Redlich-Kwong (SRK) cubic equation of state with classical van der Waals (two-parameter conventional mixing rule, 2PCMR) mixing rules. A single set of interaction parameters that lead to a correct phase behavior was used in this work to model the new VLE data and critical points of the mixtures in a wide range of temperature and pressure. The SRK prediction results were compared to the new data measured in this study and to available literature data.
The structures of 4‐chloro‐3‐nitroaniline, C6H5ClN2O2, (I), and 4‐iodo‐3‐nitroaniline, C6H5IN2O2, (II), are isomorphs and both undergo continuous (second order) phase transitions at 237 and 200 K, respectively. The structures, as well as their phase transitions, have been studied by single‐crystal X‐ray diffraction, Raman spectroscopy and difference scanning calorimetry experiments. Both high‐temperature phases (293 K) show disorder of the nitro substituents, which are inclined towards the benzene‐ring planes at two different orientations. In the low‐temperature phases (120 K), both inclination angles are well maintained, while the disorder is removed. Concomitantly, the b axis doubles with respect to the room‐temperature cell. Each of the low‐temperature phases of (I) and (II) contains two pairs of independent molecules, where the molecules in each pair are related by noncrystallographic inversion centres. The molecules within each pair have the same absolute value of the inclination angle. The Flack parameter of the low‐temperature phases is very close to 0.5, indicating inversion twinning. This can be envisaged as stacking faults in the low‐temperature phases. It seems that competition between the primary amine–nitro N—H...O hydrogen bonds which form three‐centred hydrogen bonds is the reason for the disorder of the nitro groups, as well as for the phase transition in both (I) and (II). The backbones of the structures are formed by N—H...N hydrogen bonding of moderate strength which results in the graph‐set motif C(3). This graph‐set motif forms a zigzag chain parallel to the monoclinic b axis and is maintained in both the high‐ and the low‐temperature structures. The primary amine groups are pyramidal, with similar geometric values in all four determinations. The high‐temperature phase of (II) has been described previously [Garden et al. (2004). Acta Cryst. C 60 , o328–o330]. 相似文献
Effective methods for rapid sorting of cells according to their viability are critical in T cells based therapies to prevent any risk to patients. In this context, we present a novel microfluidic device that continuously separates viable and non-viable T-cells according to their dielectric properties. A dielectrophoresis (DEP) force is generated by an array of castellated microelectrodes embedded into a microfluidic channel with a single inlet and two outlets; cells subjected to positive DEP forces are drawn toward the electrodes array and leave from the top outlet, those subjected to negative DEP forces are repelled away from the electrodes and leave from the bottom outlet. Computational fluid dynamics is used to predict the device separation efficacy, according to the applied alternative current (AC) frequency, at which the cells move from/to a negative/positive DEP region and the ionic strength of the suspension medium. The model is used to support the design of the operational conditions, confirming a separation efficiency, in terms of purity, of 96% under an applied AC frequency of 1.5 × 106 Hz and a flow rate of 20 μl/h. This work represents the first example of effective continuous sorting of viable and non-viable human T-cells in a single-inlet microfluidic chip, paving the way for lab-on-a-chip applications at the point of need. 相似文献
Russian Journal of Applied Chemistry - The process of Pd(II) sorption from hydrochloric acid solutions was studied in the pH range of 0.5–5.0 in the presence of Pt(IV) and a number of... 相似文献
A new approach for the evaluation of chiral purity of serine esterification products bearing long-chain alkyl substituents was developed. The compounds were simply converted to aryl-substituted oxazolines which: (i) facilitates effective chromatographic enantioseparation and (ii) enables direct detection using ultraviolet absorption. The method employs a polysaccharide-based chiral stationary phase and allows enantioseparation of highly stable oxazoline products in less than 6 min using a simple binary mobile phase. As opposed to the previously used normal phase method the developed method was performed in the reversed-phase mode. Aside from the benefits of switching to less hazardous solvents with regard to the principles of Green Chemistry, this has also led to a reduction in the analysis time. In comparison with known serine chromophores, the best enantioseparation of aryloxazoline rigid structure may be achieved only based on non-polar interactions with the chiral stationary phase. In contrast, the substitution of the chromophore moiety with hydroxyl substituent affected intra and intermolecular interactions that caused enantioseparation differences. Concurrently, we found high chirality retention of (R)- and (S)-configuration oxazoline standards (≥99% enantiomeric excess) during the introduction of the ultraviolet label. The method is suitable for rapid injection of the mixture containing the ultraviolet absorption marker without prior purification. 相似文献
