R?ntgenspektrometrische Elementbestimmung in Abwasser: Probenvorbereitung und Matrixkorrekturverfahren

Zusammenfassung Für Elementbestimmungen in Abwasser wird ein Röntgenfluorescenzverfahren beschrieben. Zur Probenvorbereitung werden die Elemente durch Gefriertrocknung auf einem inerten Träger angereichert. Diese Anreicherung ist nicht selektiv und erfaßt praktisch alle in Abwasser gelösten und suspendierten Verunreinigungen. Für die Berechnung der Elementkonzentrationen aus den gemessenen Fluorescenzintensitäten wird ein Matrixkorrekturverfahren angegeben, welches dem unterschiedlichen Absorptionsverhalten der Probenmatrix Rechnung trägt. Die Massenabsorptionskoeffizienten werden durch Messung der diffus gestreuten Bremsstrahlung bzw. der Comptonstreustrahlung ermittelt. Die Selbstabsorption des zu bestimmenden Elementes wird rechnerisch berücksichtigt. Das Korrekturverfahren kann auf alle mit Röntgenfluorescenzanalyse bestimmbaren Elemente angewendet werden.

---

Determination of elements in waste water by x-ray fluorescence analysis: Sample preparation and matrix correction method

Summary For sample preparation the elements are enriched upon an inert carrier by freeze-drying. This enriching procedure is not selective and collects all dissolved and suspended contaminations from the waste water. In order to calculate the element concentrations from the measured fluorescence intensities a matrix correction method is given which considers the different absorption behaviour of the matrix. The mass absorption coefficients are obtained by measuring the scattered X-ray tube spectrum or a Compton scattered X-ray tube line, respectively. The self-absorption of the element to be determined is taken into account. The correction method is applicable to all elements detectable by X-ray fluorescence.

Herrn Dr. H. Wagner danken wir für das stete Interesse, die zahlreichen konstruktiven Diskussionen und die Hilfe beim Abfassen des Manuskripts.     

Fortran IV programs for the penultimate copolymerization model

Three programs have been written for calculations involving use of the penultimate copolymerization model. The first computes the penultimate reactivity ratios from composition-conversion data, without constraints, at any conversion. A nonlinear leastsquares technique using Marquardt's algorithm is employed. The second program computes the four optimum starting monomer feed ratios, M₁⁰/M₂⁰ which should be used by the experimenter from the penultimate reactivity ratios. These optimum feed ratios are obtained by choosing the conditions necessary to minimize the determinant of the variance-covariance matrix. The input for the first program includes estimates of known values of the penultimate reactivity ratios. By using these two programs sequentially the experimenter has an optimized experimental approach toward evaluating penultimate reactivity ratios at any conversion. Finally, a program has been provided to calculate composition–conversion data, given penultimate reactivity ratios.     

Quantitative studies on the peroxidation of human low-density lipoprotein initiated by superoxide and by charged and neutral alkylperoxyl radicals.

Rates of peroxidation of human LDL and rates of consumption of the LDL's alpha-tocopherol (TocH) have been measured at 37 degrees C. Peroxidation was initiated by radicals generated in the aerated aqueous phase at known rates by thermal decomposition of appropriate precursors: superoxide (O2(*-)/HOO(*)) from a hyponitrite and alkylperoxyls (ROO(*), two positively charged, one negatively charged and one neutral) from azo compounds. The efficiencies of escape from the solvent cage of the geminate pair of neutral carbon-centered radicals was found to be 0.1, but it was 0.5 for the three charged radicals, a result attributed to radical/radical Coulombic repulsion within the cage. All four alkylperoxyls initiated and terminated tocopherol-mediated peroxidation (TMP) with about equal efficiency and essentially all of these radicals that were generated were consumed in these two reactions. TMP is a radical chain process, and when initiated by the alkylperoxyls, the rate of LDL peroxidation was faster in the early stages while TocH was present than later, after all of this "antioxidant" had been consumed. In contrast, only about 3-4% of the generated superoxide radicals reacted in any measurable fashion with TocH-containing LDL at pH's from 7.6 to 6.5 and peroxidation was much slower than with a similar rate of generation of alkylperoxyls. After all the TocH had been consumed, LDL peroxidation was negligible at pH 7.6 and 7.4, but at pH 6.8 and 6.5, the peroxidation rates showed a large increase over the rates while the TocH had been present. That is, endogenous TocH behaves as an antioxidant in LDL subjected to attack by the physiologically relevant superoxide radical, whereas TocH behaves as a prooxidant in LDL subjected to attack by the probably far less physiologically important alkylperoxyls. Rates of LDL peroxidation initiated by superoxide increased as the pH was decreased, and the results are consistent with the initiation of peroxidation of fresh LDL occurring via H-atom abstraction from TocH by HOO(*) to form the Toc(*) radical and termination by reaction of O2(*-) with Toc(*), a process that occurs partly by addition leading to TocH consumption and partly by electron plus proton transfer leading to the regeneration of TocH.     

IR double resonance experiments with size selected clusters for identification of isomers

Infrared photodissociation spectra of (CH₃OH) _n clusters (n=2, 3 and 6) and the mixed dimer C₂H₄ · CH₃COCH₃ are presented. The clusters are generated in a supersonic jet expansion and size selected by scattering from a helium atomic beam combined with mass spectrometric detection. Continuous CO₂-lasers are used to vibrationally excite the molecules in the cluster leading to rapid dissociation of the complex. Various dissociation peaks that are found in single-laser dissociation spectra can be assigned unambigously in a pump-probe experiment with two lasers to either different isomers (acetone-ethene dimer) or splitted lines of one isomer (methanol hexamer). For size distributions, the method is able to select contributions of single masses which is demonstrated for mixtures of methanol dimers and trimers.     

Zeolite content determination in kaolinic clays via thermal effects

For application in catalysis and adsorption processes, zeolites are synthesized on the surface of spray-dried kaolin microspheres. Various thermal effects are used for the rapid characterization of the zeolite type and content. From DTA measurements, the exothermic lattice break-down peak gives information on the zeolite type and the thermal stability of the sample. Measurements of the heats of immersion by a very simple and quick method allow conclusions about the type and the sorption properties of the zeolite part of the clay. The most precise method to estimate the zeolite content was a standardized technique of desorption and readsorption of water or organic compounds by means of a thermobalance.

---

Zusammenfassung Zur Anwendung in der Katalyse und bei Adsorptinsprozessen werden Zeolithe auf der Oberfläche sprüh-getrockneter Kaolin-Mikrokugeln eingesetzt. Verschiedene thermische Effekte werden zur schnellen Charakterisierung des Zeolith-Typs und -Gehalts genutzt. Der exotherme DTA-peak beim Gitterzusammenbruch liefert Informationen über Zeolith-Typ und thermische Stabilität der Probe. Eine sehr einfache Schnellmethode zur Messung der Immersionswärmen erlaubt Schlussfolgerungen über Typ und Sorptionseigenschaften des zeolithischen Anteils des Tons. Die genaueste Methode zur Bewertung des Zeolithgehalts war eine standardisierte thermogravimetrische Desorptions- und Readsorptions-Methode mit Wasser oder organiscen Verbindungen.

---

, , , . . , . , , . , .

     

Solvent Effects on the Absorption Spectrum of the Product and the Equilibrium Constant for the Proton Transfer Reaction from 1-Phenacylquinolinium Bromide to Amines

The equilibrium constants, K ₂, have been determined for the proton-transfer reactions of 1-phenacylquinolinium ion, PHQ⁺, with several amines {triethylamine (TEA), N,N,N′,N′-tetramethylethylenediamine (ED), N,N,N′, N′-tetramethylpropanediamine (PD), N,N,N′,N′-tetramethylbutanediamine (BD), and 1,8-bis(dimethylamino-naphthalene (DMAN)} in acetonitrile (AN), AN-tetrahydrofuran (THF) and AN-ethanol (EtOH) mixtures. The reaction was followed spectrophotometrically using a stopped-flow technique. The K ₂ value decreased for DMAN and increased for TEA with increasing vol-% of THF in AN-THF mixtures. The changes in the K ₂ value for ED, PD and BD changed in the order: ED, PD and BD from a pattern similar to TEA to a pattern similar to DMAN. The change in the K ₂ value for DMAN with increasing vol-% of THF in AN-THF mixtures was explained by the effect of polarity on the stability of P⁻Q⁺ (the deprotonated product of PHQ⁺). The effect of THF on the K ₂ value is consistent with that of the peak wavelength of the absorption spectrum of P⁻Q⁺. The change in the K ₂ value for TEA, ED, PD and BD depended on the structures of the protonated bases, one of the products for this reaction. The effect of EtOH on the K ₂ value for DMAN was examined in ternary EtOH-THF-AN mixtures that contain different amounts of EtOH and whose relative permittivities were adjusted to that of EtOH. The K ₂ value increased with increasing vol-% of EtOH because of the stabilization of P⁻Q⁺ upon the formation of the hydrogen-bonded complex with EtOH. The absorption spectrum of P⁻Q⁺ demonstrated a blue shift as the vol-% of EtOH increased.     

Double hexagonal chains with minimal total <Emphasis Type="Italic">π</Emphasis>-electron energy

The total energy of all π-electrons in a conjugated hydrocarbon (within the framework of HMO approximation) is the sum of the absolute value of all the eigenvalues of its corresponding graph. In this paper, we consider “double hexagonal chains” as benzenoids constructed by successive fusions of successive naphthalenes along a zig–zag sequence of triples of edges as appear on opposite sides of each naphthalene unit. It is shown that if the fusions are such as to give a polyaceacene then the total π-electron energy is the minimum from among all the double hexagonal chains with the same number of naphthalene units.      

Solid-phase extraction and HPLC determination of 4-vinyl guaiacol and its precursor, ferulic acid, in orange juice.

This study is undertaken to develop a simplified, rapid method to determine both immediate and potential off odors due to 4-vinyl guaiacol and its odorless precursor, ferulic acid, from a single sample preparation and chromatographic analysis. Orange juice sample preparation consists of a simple, C18 solid phase extraction. Utilizing a 5-microns, 25-cm, C18 column, both compounds can be separated within 40 min using a one-step, linear gradient beginning with an aqueous 12% tetrahydrofuran (THF)-5% acetonitrile mixture and ending with 35% aqueous THF. Hesperidin and nariutin have been identified as the compounds that interfered with the ultraviolet (UV) determination of sinapic and caffeic acids. Fluorescence detection with wavelength programming offers optimal sensitivity and selectivity. Recoveries of 4-vinyl guaiacol and ferulic acid range from 90 to 103%. Detection limits are 1 ppm and 5 ppm for ferulic acid and 4-vinyl guaiacol, respectively. Other hydroxycinnamic acids such as coumaric, sinapic, and caffeic acids may also be determined from the same chromatogram.     

Energy-adjustedab initio pseudopotentials for the second and third row transition elements

Summary Nonrelativistic and quasirelativisticab initio pseudopotentials substituting the M^(Z–28)+-core orbitals of the second row transition elements and the M^(Z–60)+-core orbitals of the third row transition elements, respectively, and optimized (8s7p6d)/[6s5p3d]-GTO valence basis sets for use in molecular calculations have been generated. Additionally, corresponding spin-orbit operators have also been derived. Atomic excitation and ionization energies from numerical HF as well as from SCF pseudopotential calculations using the derived basis sets differ in most cases by less than 0.1 eV from corresponding numerical all-electron results. Spin-orbit splittings for lowlying states are in reasonable agreement with corresponding all-electron Dirac-Fock (DF) results.     

Spectrophotometric determination of samarium(III) with chrome azurol S in the presence of cetylpyridinium chloride

A sensitive, simple method for the determination of trace amounts of samarium by spectrophotometry is described based on the formation of the samarium-chrome azurol S (CAS) complex in micellar medium. The molar absorptivities of the complexes at pH 7.5 at 505 nm were 3.6x10(4) and 1.4x10(5) l mol(-1) cm(-1) for water media and cetylpyridinium chloride (CPC), respectively. Beer's law is obeyed from 0.05-2 mg l(-1) of samarium at 505 nm as Sm-CAS-CPC complex. Optimal conditions such as reagent amounts, and pH for the samarium determination were reported. The effects of foreign ions were also investigated. The proposed method was successfully applied to the determination of samarium contents in synthetic samples.