Thermal decomposition of the composite hydrotalcites of iowaite and woodallite

The thermal stability and thermal decomposition pathways for synthesized composite iowaite/woodallite have been determined using thermogravimetry analysis in conjunction with evolved gas mass spectrometry. Dehydration of the hydrotalcites occurred over a range of 56–70°C. The first dehydroxylation step occurred at around 255°C and, with the substitution of more iron(III) for chromium(III) this temperature increased to an upper limit of 312°C. This trend was observed throughout all decomposition steps. The release of carbonate ions as carbon dioxide gas initialised at just above 300°C and was always accompanied by loss of hydroxyl units as water molecules. The initial loss of the anion in this case the chloride ion was consistently observed to occur at about 450°C with final traces evolved at 535 to 780°C depending of the Fe:Cr ratio and was detected as HCl (m/z=36). Thus for this to occur, hydroxyl units must have been retained in the structure at temperatures upwards of 750°C. Experimentally it was found difficult to keep CO₂ from reacting with the compounds and in this way the synthesized iowaite-woodallite series somewhat resembled the natural minerals.     

Mesoporous micelle templated silica with incorporated C<Subscript>8</Subscript> and C<Subscript>18</Subscript> phase

Mesoporous silica material of MCM-41 type was synthesized by co-condensation of highly concentrated octyltriethoxysilane (OTEOS), octadecyltriethoxysilane (ODTEOS) and tetraethoxysilane (TEOS). The obtained hybrid materials were characterized using XRD, TG-DSC and low temperature adsorption/desorption of nitrogen. It was shown that the applied method of synthesis allows to obtain silica of MCM-41 type with a high degree of hydrocarbon saturation.     

Preparation of HPMC–EA–DMAEMA nanosized latex

Nanosized copolymer latex of hydroxypropylmethylcellulose (HPMC) grafted with ethyl acrylate (EA) and dimethylaminoethyl methacrylate (DMAEMA) has been prepared by acidifying submicron-sized latex particles synthesized by soap-free emulsion graft copolymerization using potassium persulfate (KPS) as initiator. The effects on the diameter of the latex particles of different conditions, for example concentration of DMAEMA, amount of HPMC, and ratio of HCl to DMAEMA for acidification, were investigated. It was found that increasing the mole ratio of HCl to DMAEMA to 1.0 and increasing the DMAEMA content both resulted in a decrease in particle diameter, whereas increasing the amount of HPMC resulted in larger particle sizes. Measurement by dynamic light scattering (DLS) revealed the diameter of the latex particles was >200 nm before acidification and <100 nm after acidification. Evidence of grafting was obtained by use of Fourier transform infrared (FTIR) spectroscopy. Transmission electron microscopy (TEM) was used to characterize the morphology of the copolymer particles before and after acidification.     

Influence of thermal and thermo-mechanical treatment

Two lipids with similar melting ranges but of different composition were analyzed using differential scanning calorimetry and X-ray diffraction. The lipids were processed via extrusion or were tempered at different temperatures; they were analyzed directly after extrusion and after storage at 40°C. Precirol ATO 5® showed high sensitivity to storage time and varied temperature exposure. Extrusion showed only marginal influences on the solid state. Melting peaks were narrower and shifted to higher temperatures in comparison to the untreated powder. Dynasan 114® was more robust, changes in the solid state could only be shown for samples treated above the melting range. Thus, Dynasan 114® is more appropriate for solid lipid extrusion of pharmaceutical products.     

Chemical instabilities during oxidation of 1,4-naphthalenediol in a homogeneous medium: II. Thermodynamic analysis and mathematical modeling

A possible mechanism of 1,4-naphthalenediol oxidation in the oscillatory regime has been considered, and a mathematical model describing the kinetics has been developed. Based on a thermodynamic Lyapunov function, it has been shown that the source of chemical instabilities is in the existence of autocatalytic steps and dynamic feedbacks. Qualitative analysis and numerical solution of the set of differential equations that model the reaction kinetics have been performed. The character of the stationary state and the possibility of bifurcations have been determined. The mathematical model satisfactorily describes the processes occurring in the system.     

Calorimetric approach to tetronic/water interactions

Tetronic^®comprises X-shaped copolymers formed by four poly(propylene oxide) (PPO) andpoly(ethylene oxide) (PEO) block chains bonded to an ethylene diamine centralgroup. Micellization behaviour of three representative Tetronics (T304, T904and T1307) was characterized to gain an insight into the interactions betweenthe copolymer unimers and the state of water in their solutions. The enthalpyof demicellization, recorded at 37°C in an isoperibol microcalorimeter,indicated that the process was in all cases exothermic and the enthalpy rankedin the order T1307≥T904>>T304. Micellization is entropy-driven owing tohydrophobic interactions between the PPO chains.DSC analysisshowed that the crystallization and melting peaks of the free water remainingin T304 and T904 solutions were progressively shifted toward lower temperaturesas the surfactant proportion increased, owing to a colligative effect. Boundwater corresponded to 3 water molecules per EO repeating unit. In the caseof T1307, which has longer PEO chains, a splitting of the melting peak wasobserved, one peak appearing around 0°C due to free water and anotherat –15°C due to interfacial water. As T1307 proportion raised, theenthalpy of the former decreased, whilst the enthalpy of the latter increased.In 40% T1307 solutions, interfacial water overcame the proportion of freewater; there being 1 interfacial and 3 bound water molecules per EO repeatingunit. Gaussian deconvolution of FTIR spectra also enabled to characterizethe evolution of free water as a function of Tetronic proportion. The dependenceof micellization and water interaction behaviour on Tetronics structure shouldbe taken into account to use these copolymers as drug solubilizers and micellarcarriers.     

DNA intercalating studies of [Ru(bpy)<Subscript>2</Subscript>HPIP]<Superscript>2+</Superscript> with intramolecular hydrogen bond ligand based on introduction of copper ion

The effects of copper ion on the interaction of [Ru(bpy)₂HPIP]²⁺(bpy = 2,2′-bipyridine, HPIP = 2-(2-hydroxyphenyl) imidazo [4,5-f] [1, 10] phenanthroline) with DNA have been investigated by electronic absorption spectroscopy and fluorescence spectroscopy. HPIP ligand of the complex with an intramolecular hydrogen bond can bind Cu²⁺ in the absence of DNA, as revealed by the absorbance and fluorescence decrease for [Ru(bpy)₂HPIP]²⁺. The resultant heterometallic complex binds to DNA via intercalation of HPIP into the DNA base pairs and its DNA-binding ability is stronger than [Ru(bpy)₂HPIP]²⁺ itself. The DNA bound [Ru(bpy)₂HPIP]²⁺ cannot bind Cu²⁺ at low Cu²⁺ concentration and the intramolecular hydrogen bond in HPIP is located inside the DNA helix. While the Cu²⁺ concentration is relative high, Cu²⁺ can quench the fluorescence of DNA bound [Ru(bpy)₂HPIP]²⁺. The quenching reason is proposed.     

Structural Study of Silica Xerogel Composites Containing Pd Aggregates

Composites containing Pd aggregates dispersed in amorphous silica are of interest from both a fundamental and applied point of view because of their attractive catalytic properties. The silica powders added with palladium, prepared by the sol-gel method, were studied using X-ray diffraction, and IR- and UV-Vis-spectrophotometry. Silica xerogel samples were prepared using a ethanol/H₂O/TEOS molar ratio of 4:11.6:1 and loaded with sodium tetrachloropalladate. The silica xerogel microstructure of the powders was studied as a function of annealing temperature. Attention was paid to the evolution of the glass matrix as well as the palladium aggregates in the SiO₂ matrix. We found in our samples partial crystallization of the glass matrix in form of quartz and cristobalite phases with palladium oxide and metallic palladium phase at 1000^∘C. The Rietveld refinement method was used in order to determine the percentage of the phase contents.     

Synthesis and in vivo study of metallofullerene based MRI contrast agent

Gd@C₈₂(OH)₄₀ has been developed as a new generation of MRI contrast agent. But recently, it was found that Gd@C₈₂(OH) _x with a larger number of OH (x>36) would lead to cage break and hence, release of highly toxic Gd ions. We synthesized the more stable Gd@C₈₂(OH) _x with less OH-number, Gd@C₈₂(OH)₁₆, and studied its proton relaxivity and MRI images. The results indicate that Gd@C₈₂(OH)₁₆ also gives high proton relaxivity, even higher than that of (NMG)₂-Gd-DTPA. The bio-distribution indicated that Gd@C₈₂(OH)₁₆ tends to be entrapped in the liver and kidney and remained in tissue for about 2 hours. The results suggest that the more stable metallofullerene derivative Gd@C₈₂(OH)₁₆ can be the potential candidate of the new MRI contrast agent.