Non-reactive metal/semiconductor interfaces: a combined AES,AFM andPAC study

Thin In films on Ge(100), Si(100) andSi(111) are investigated using Auger-electron spectroscopy (AES), atomic force microscopy (AFM) andperturbed -angular correlation (PAC) spectroscopy, respectively. The growth mode of the metal films is characterized by in situ AES measurements, indicating distinct differences between the different substrate surfaces. Additional AFM investigations are used to monitor the film topography at higher metal coverage. Finally, the local crystalline structure of the films is studied by the PAC technique.     

On spectral properties ofq-oscillator operators

The property of self-adjointness of the operatorQ =a ₊ +a _- in three types ofq-oscillator algebras is considered. Spectral measures and generalized eigenfunctions ofQ are found in the cases when this operator is bounded. Generalized eigenvectors are expressed in terms ofq-Hermite polynomials. If the operatorQ is unbounded, then its closure is not self-adjoint. However, in this case, admits self-adjoint extensions. Deficiency subspaces are one-dimensional. These subspaces are explicitly found.     

Quantum-chaotic scattering effects in semiconductor microstructures

We show that classical chaotic scattering has experimentally measurable consequences for the quantum conductance of semiconductor microstructures. These include the existence of conductance fluctuations-a sensitivity of the conductance to either Fermi energy or magnetic field-and weak-localization-a change in the average conductance upon applying a magnetic field. We develop a semiclassical theory and present numerical results for these two effects in which we model the microstructures by billiards attached to leads. We find that the difference between chaotic and regular classical scattering produces a qualitative difference in the fluctuation spectrum and weak-localization lineshape of chaotic and nonchaotic structures. While the semiclassical theory within the diagonal approximation accounts well for the weak-localization lineshape and for the spectrum of the fluctuations, we uncover a surprising failure of the semiclassical diagonal-approximation theory in describing the magnitude of these quantum transport effects.     

Determination of selenium in blood serum by ICP-OES including an on-line wet digestion and Se-hydride formation procedure

Summary An analytical procedure for the determination of Se, as well as of other trace elements of clinical interest, in undiluted blood serum samples is presented. This procedure allows the on-line wet ashing of the sample, the hydride generation and the determination of the SeH₂ formed in one step. For this purpose, carrier solution and the injected sample (300 l) were merged with an acid stream (80% H₂SO₄, 12% HClO₄, 8% HNO₃) and passed through a reaction coil heated up to 240°C. To increase the dispersion, the wet digestion was carried out in an ultrasonic field. After trapping of the gas bubbles, 5 mol/l HCl and 0.053 mol/l NaBH₄ solutions were added via T-junctions for Se-hydride generation. The nebulizing system of the ICP-OES was used as gas/liquid separator. The hydride was swept from the spray chamber into the plasma by an argon gas flow with droplets containing other sample constituents. This allows the simultaneous determination of other trace elements of clinical interest, for example Fe, Cu and Zn. The relative detection limit for Se in blood serum was 5 g/l. The quality of the developed procedure was verified in two ways: by measuring SRM Seronorm 116 and by comparing the results for different serum samples with the results obtained with ETAAS. Our results were in good agreement in both cases.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

Zum mechanismus des strahlenchemischen abbaus von polytetrafluorethylen

The present work studies the changes in polymer structure and the mechanism of the decomposition of polytetrafluoroethylene resin (PTFE) exposed to high energy radiation (electron beam). Spectroscopic and kinetic observations are used to interpret the degradation process. For the first time the decomposition of PTFE has been carried out on a preparative scale and new results obtained by analysing the degradation products. The radiation-induced degradation of PTFE is accompanied by thermal degradation under certain irradiation conditions. This is due to an increase in temperature of the polymer caused by retardation of highly accelerated electrons (heat accumulation effect).The kinetics are discussed in terms of the reactions and recombination of radicals produced by high-energy radiation both in the polymer melt and the polymer surface. These are related to the overall rate of decomposition.The primary radicals formed by decomposition of PTFE in an inert atmosphere (N₂, Ar) react to produce perfluorinated alkanes and alkenes. In the presence of reactive gases the decomposition fragments originated will react rapidly; e.g. if oxygen is present in the reactive area the radicals form perflourinated peroxyl and oxyl radicals which finally stabilize themselves by CC-scission to perfluorocarbon acid fluorides and carbonyldifluorides.     

High-performance liquid chromatography – atmospheric pressure negative chemical ionisation – mass spectrometry of 2,4-dinitrophenyl derivatives of amines

High-performance liquid chromatography (HPLC) coupled to mass spectrometry (MS) is used to detect 2,4-dinitrophenyl (DNP) derivatives of amines by means of negative chemical ionisation at atmospheric pressure. The high sensitivity and good comparability of UV- and MS-detection of DNP-derivatives of amines is shown by several examples. The high selectivity of the derivatisation and the detection method (UV and MS) is used for the analysis of unknown amines in aqueous phases after hydrolytic degradation of polyamide-amine- or polyamine-epoxide-adducts as well as for the characterisation of commercial products.     

Oxidation of micro or trace amounts of bromide to bromate by peroxodisulphate before their iodometric determination by titration or spectrophotometry

The optimum conditions for the oxidation of bromide to bromate by peroxodisulphate at 120 degrees as well as for the decomposition of the excess of oxidant have been determined. The predicted advantages of this oxidizing agent, viz. minimal blanks and destruction of small amounts of interfering organic matter and reducing substances, were confirmed. The bromate was determined iodometrically either by titration with thiosulphate or by spectrophotometry in absence of oxygen at 355 nm. The titrimetric finish applied to 0.8-8 micromole of bromide gave a mean yield of 100.0%, s = 6 nmole. The spectrophotometric finish applied to 0.05-0.25 micromole of bromide gave a mean yield of 98.9%, s = 1.1 nmole. Interfering amounts of iodide present in the sample and oxidized to iodate can be corrected for by making use of the pH-dependence of the reaction of iodide with bromate and iodate.     

An efficient synthesis of [1,1]ferrocenophane via 1,1′-bis(6-fulvenyl)ferrocene

[1,1]Ferrocenophane can be prepared by reduction of 1,1′-bis(6-fulvenyl)ferrocene with complex borohydrides to give the dianion of 1,1′-bis(cyclopentadienylmethyl)ferrocene. Reaction of this dianion with ferrous chloride produces the ferrocenophane in good yield.     

Determination of227Ac in geological materials through neutron activation and alpha-spectrometric assay of induced228Th

A new route has been developed for the micro-determination of²²⁷Ac in geological materials by neutron activation. The method is based on intense neutron irradiation of the analysed samples followed by separation and α-spectrometric determination of²²⁸Th, the β-decay product of the 6.1 hrs²²⁸Ac isotope formed. Two alternatives are considered for analysis related to the origin of the analysed matrix. The high sensitivity of the method is documented by the determination of 10^?17 g²²⁷Ac/g sample. The method is successfully applied for age determination of five uranium containing materials and old uranium glass from Bohemia, CSSR.