Surface Characterization of Sepiolite by Inverse Gas Chromatography

Inverse gas chromatography (IGC) was applied to characterize the surface of sepiolite. The adsorption thermodynamic parameters (the standard enthalpy (ΔH ⁰), entropy (ΔS ⁰) and free energy of adsorption (ΔG ⁰)), the dispersive component of the surface energy (γ _S ^d ), and the acid/base character of sepiolite surface were estimated by using the retention time of different non-polar and polar probes at infinite dilution region. The specific free energy of adsorption (ΔG ^sp ), the specific enthalpy of adsorption (ΔH ^sp ), and the specific entropy of adsorption (ΔS ^sp ) of polar probes on sepiolite were determined. ΔH ^sp were correlated with the donor and modified acceptor numbers of the probes to quantify the acidic K _A and the basic K _D parameters of the sepiolite surface. The values obtained for the parameters K _A and K _D indicated an acidic character for sepiolite surface.     

Novel dye-attached macroporous films for cadmium, zinc and lead sorption: Alkali Blue 6B-attached macroporous poly(2-hydroxyethyl methacrylate)

Alkali Blue 6B-attached poly(2-hydroxyethyl methacrylate) (poly(HEMA)) microporous films were investigated as chelate forming sorbents for heavy metal removal. Poly(HEMA) microporous films were prepared by UV-initiated photo-polymerization of HEMA in the presence of an initiator (azobisisobutyronitrile (AIBN)). Alkali Blue 6B was attached covalently. These films with a swelling ratio of 58%, and carrying 14.8 mmol Alkali Blue 6B m(-2) which were then used in the removal of Cd(II), Zn(II) and Pb(II) from aqueous media. Adsorption rates were very high, equilibrium was achieved in about 30 min. The maximum adsorption of heavy metal ions onto the Alkali Blue 6B-attached films were 41.4 mmol m(-2) for Cd(II), 52.4 mmol m(-2) for Zn(II), and 64.5 mmol m(-2) for Pb(II). When the heavy metal ions competed during the adsorption from a mixture the adsorption values for Cd(II), Zn(II) and Pb(II) were quite close. Heavy metal ions were desorbed by using 0.1 M HNO(3). A significant amount of the adsorbed heavy metal ions (up to 95%) could be desorbed in 30 min. Repeated adsorption/desorption cycles showed the feasibility of these novel dye-attached microporous films for heavy metal removal.     

Dioxomolybdenum(VI) complexes of 2-hydroxybenzaldehyde 4-phenyl-S-methylthiosemicarbazone

Mixed ligand complexes of dioxomolybdenum(VI) with 2-hydroxybenzaldehyde 4-phenyl-S-methylthiosemicarbazone (H₂L) were prepared with the formula [MoO₂(L)D] (D = H₂O, methyl, n-butyl, and n-undecyl alcohol, DMF, DMSO, pyridine, 4-picoline, and 3,5-lutidine). The compounds were characterized by elemental analysis, IR and ¹H NMR spectroscopy. The thermal decomposition of the compounds were investigated by using TGA, DTG, and DTA methods in air, and the thermal behavior depending on the second ligand molecule was discussed. A single crystal of the DMF coordinated complex was studied by X-ray diffractometry. The text was submitted by the authors in English.     

Synthesis and biological activity of new 2-amino-4-[3-methyl-3-(5,6,7,8-tetrahydro-2-naphthyl)cyclobutyl]thiazole derivatives

2-Amino-4-[3-methyl-3-(5,6,7,8-tetrahydro-2-naphthyl)cyclobutyl]thiazole was synthesized by reaction of 1-methyl-1-(5,6,7,8-tetrahydro-2-naphthyl)-3-chloroacetylcyclobutane with thiourea in ethanol, and its subsequent transformations afforded new derivatives which were tested in vitro for antibacterial activity against some bacteria using the disk diffusion technique.__________From Zhurnal Organicheskoi Khimii, Vol. 40, No. 12, 2004, pp. 1861–1865.Original English Text Copyright © 2004 by Koparr, Cansz, Ahmedzade.The original article was submitted in English.     

Determination of heavy metal concentration in feed and permeate streams of polymer enhanced ultrafiltration process

Polymer enhanced ultrafiltration (PEUF) is a newly developed method for the removal of heavy metals from aqueous solutions. This method was applied for the removal of mercury and cadmium with the presence of polyethyleneimine (PEI) as a water soluble polymer. After ultrafiltration experiments for metal–polymer mixtures, two separate streams, namely, retentate and permeate, former of which contains mainly metal–polymer complex and free polymer molecules while latter of which mainly contains free metal ions, were obtained. At the end of PEUF experiments, performance of operation was determined by concentration analyses which was achieved by atomic absorption spectroscopy (AAS) applied in a different way for permeate and retentate streams considering the effect of presence of polymer. For mercury analysis, cold vapor AAS was applied. It was observed that the presence of PEI did not affect the atomic absorption signal when 10% HCl was added to the sample solutions. For calcium and cadmium, flame AAS was used. It was observed that change in PEI concentration results in change in measured concentration of calcium and cadmium. Therefore, two new approaches were developed for accurate measurement of concentrations of calcium and cadmium. It was also observed that presence of other metals did not affect the accuracy of the measurement of a particular metal in the concentration range studied.     

Adsorption of N-Nitrosodiethylamine and N-Nitrosodimethylamine on Activated Carbon: A Pre-Concentration Procedure for Gas Chromatographic Analysis

In this study, a rapid pre-concentration procedure, which employs powdered activated carbon as a clean-up and pre-concentration material, is described for the gas chromatographic analysis of N-nitrosodiethylamine (NDEA) and N-nitrosodimethylamine (NDMA) in aqueous solutions. It was found that powdered activated carbon is suitable for the adsorption of volatile N-nitrosamine compounds from aqueous solutions. Adsorption efficiency with spiked beer samples (alcohol content 5% v/v) was found to be 80.5% (NDMA) and 89.4% (NDEA) and recovery of extraction from activated carbon was calculated as 82.1% (NDMA) and 89.7% (NDEA), respectively. The effect of 100µgmL^–1 of tannic acid on the adsorption was also studied, and no significant effect on the adsorption and extraction of volatile N-nitrosamine compounds was found.     

Metallophthalocyanines with rod-shaped substituents

4-(4′-Dioctylaminocarbonylbiphenyloxy) phthalonitrile was synthesized from 4-(4′-carboxybiphenyloxy)phthalonitrile and dioctylamine in the presence of Et₃N. Metallophthalocyanines (Zn, Co and Cu) substituted with four dioctylaminocarbonyl biphenyloxy groups on the peripheral positions were prepared from 4-(4′-dioctylaminocarbonylbiphenyloxy)phthalonitrile and the corresponding divalent metal salts (Zn(CH₃COO)₂, CoCl₂ and CuCl₂). The new phthalocyanines are soluble in common organic solvents. These compounds were characterised by ¹H-NMR, ¹³C-NMR, FT-IR, UV-Vis and mass spectroscopies.     

Synthesis of polyimides by photoaddition of bismaleimides to benzene

Polyimides have been synthesized by the sensitized photoaddition of aliphatic and aromatic bismaleimides to benzene. The reaction involves 2+2 cycloaddition to give homoannular diene intermediate followed by Diels-Alder addition to give polymer. Proof of structure is based mainly on a comparison of infrared spectra with those of the corresponding polyimides prepared from maleic anhydride-benzene photoadduct and diamines. The very low solubility of the polymers indicates that crosslinking probably occurred during photolysis. All the polyimides appear to decompose by decyclization at about 420–485°C. Polymer yield was dependent on bismaleimide structure.     

A phenolate-induced trans influence: crystallographic evidence for unusual asymmetric coordination of an alpha-diimine in ternary complexes of iron(III) possessing biologically relevant hetero-donor N-centered tripodal ligands

Three mononuclear ternary complexes of iron(III) with an alpha-diimine (bipy or phen) and a derivative of N,N-bis(2-hydroxybenzyl)glycinate (L3-) have been synthesized and characterized by magnetic susceptibility measurements, electron paramagnetic resonance (EPR) spectroscopy, vibrational spectroscopy, and electronic absorption spectroscopy. Single-crystal X-ray structure determinations of the pseudo-octahedral complexes [Fe(bipy)L] x MeCN [L = (3,5-Br2)-L3- or (5,3-Cl,Me)-L3-] revealed a considerable and consistent distortion in the coordination of bipy to iron(III) attributable largely to electronic effects. In both crystal structures, the Fe-N(pyridyl) bond trans to the phenolate oxygen is 0.133 A longer than the other one positioned trans to the tertiary amine nitrogen, a relatively weaker donor. This coordination behavior of bipy is of structural interest and has not been observed previously for iron(III). The electronic and EPR spectra of the compounds [Fe(L'-L')L] x MeCN (L'-L' = bipy or phen) are consistent with the spin state of the central metal atom (S = 5/2). The charge-transfer transitions arising from the strong interactions of the phenolate moieties with the ferric ion have been identified as phenolate (p(pi)) --> iron(III) (d(pi*)) (lambda(max) approximately 500 nm, epsilon approximately 3000 M(-1) cm(-1)) and phenolate (p(pi)) --> iron(III) (d(sigma*) (lambda(max) approximately 320 nm, epsilon approximately 5200 M(-1) cm(-1)). The presence of the phenolate moieties in the quadridentate hetero-donor tripodal ligands, H3L, lends these iron(III) ternary complexes the potential to model the specific metal-coordination, metal-substrate interactions, and physicochemical behaviors of several iron-tyrosinate proteins.     

Synthesis and structural studies of (2E,3E)-3-[(6-{[(1E,2E)-2-(hydroxyimino)-1-methylpropylidene]amino}pyridin-2-yl)imino]butan-2-one oxime, ligand and its mono-, di- and trinuclear copper(II) complexes

A new dioxime ligand, (2E,3E)-3-[(6-{[(1E,2E)-2-(hydroxyimino)-1-methylpropylidene]amino}-pyridin-2-yl)imino]butan-2-one oxime, (H₂Pymdo) (3) has been synthesized in H₂O by reacting 2,3-butenedione monoxime (2) with 2,6-diaminopyridine. Mono-, di- and tri-nuclear copper(II) complexes of the dioxime ligand (H₂Pymdo) and/or 1,10-phenanthroline have been prepared. The dioxime ligand (H₂Pymdo) and its copper(II) complexes were characterized by ¹H-n.m.r., ¹³C-n.m.r. and elemental analyses, magnetic moments, i.r. and mass spectral studies. The mononuclear copper(II) complex of H₂Pymdo was found to have a 1:1 metal:ligand ratio. Elemental analyses, stoichiometric and spectroscopic data of the metal complexes indicated that the metal ions are coordinated to the oxime and imine nitrogen atoms (C=N). In the dinuclear complexes, in which the first Cu(II) ion was complexed with nitrogen atoms of the oxime and imine groups, the second Cu(II) ion is ligated with dianionic oxygen atoms of the oxime groups and are linked to the 1,10-phenanthroline nitrogen atoms. The trinuclear copper(II) complex (6) was formed by coordination of the third Cu(II) ion with dianionic oxygen atoms of each of two molecules of the mononuclear copper(II) complexes. The data support the proposed structure of H₂Pymdo and its Cu(II) complexes.