Thermophysical properties of hydroxyl ammonium ionic liquids

The thermophysical properties of hydroxyl ammonium ionic liquids: density ρ, T = (293.15 to 363.15) K; dynamic viscosity η, T = (298.2 to 348.2) K; and refractive indices n_D, T = (293.15 to 333.15) K have been measured. The coefficients of thermal expansion α, values were calculated from the experimental density results using an empirical correlation for T = (293.15 to 363.15) K. The variation of volume expansion of ionic liquids studied was found to be independent of temperature within the range covered in the present work. The thermal decomposition temperature ‘T_d’ for all the six hydroxyl ammonium ionic liquids is also investigated using thermogravimetric analyzer (TGA).     

Synthesis, characterization and photophysics of bimetallic manganese(I) and ruthenium(II) complexes

A series of new manganese(I) and ruthenium(II) monometallic and bimetallic complexes made of 2,2′-bipyridine and 1,10-phenanthroline ligands, [Mn(CO)₃(NN)(4,4′-bpy)]⁺, [{(CO)₃(NN)Mn}₂(4,4′-bpy)]²⁺ and [(CO)₃(NN)Mn(4,4′-bpy)Ru(NN)₂Cl]²⁺ (NN = 2,2′-bipyridine, 1,10-phenanthroline; 4,4′-bpy = 4,4′-bipyridine) are synthesized and characterized, in addition to already known ruthenium(II) complexes [Ru(NN)₂Cl(4,4′-bpy)]⁺ and [Cl(NN)₂Ru(4,4′-bpy)Ru(NN)₂Cl]²⁺. The electrochemical properties show that there is a weak interaction between two metal centers in Mn–Ru heterobimetallic complexes. The photophysical behavior of all the complexes is studied. The Mn(I) monometallic and homobimetallic complexes have no detectable emission. In Mn–Ru heterobimetallic complexes, the attachment of Mn(I) with Ru(II) provides interesting photophysical properties.     

Electrochemical impedance spectroscopic studies on aging-dependent electrochemical degradation of p-toluene sulfonic acid-doped polypyrrole thin film

The conducting polymer polypyrrole thin film was galvanostatically polymerized on stainless steel substrate for the supercapacitor electrode. The electrochemical stability of the electrode was monitored each 30 days of aging up to 90 days. The FTIR analysis showed an increase in intensity of the absorption peaks, especially high growth of the carbonyl peaks after 90 days of aging. The electrochemical capacitance degradation of the electrode was studied using cyclic voltammetric and galvanostatic charge/discharge analysis in 1 M Na₂SO₄ electrolyte, which showed ~?53% of fading in the initial specific capacitance value after 90 days. Further, the electrochemical degradation of polypyrrole electrodes was analyzed in detail using electrochemical impedance spectroscopy. The analysis showed a large increase in the internal resistance and low-power deliverability of the electrode with respect to aging as the main reasons for the degradation of specific capacitance of the polypyrrole electrode.     

Assessment of growth of Fusarium solani by cyclic voltammetry and possible bioanalytical applications

Fusarium solani, the fungus isolated from polyurethane waste scraps, was studied for its voltammetric response. The peak current values were obtained for different days and were plotted against time. This electrochemical method based on the voltammetric response showed all the four phases of the growth of the fungus. The growth curve obtained matched well with the conventional methodology, which is obtained by assessing the increase of dry weight of the organisms against time. The electrochemical method is more advantageous than the conventional method because the conventional method is very time consuming and difficult to work with. Further, the electrochemical method clearly shows the decline phase, which is generally not very well defined in the conventional method of assessment of the growth curve. It was confirmed by further experiments that the metabolites were responsible for the anodic peak and not the fungal biomass. Identification of the metabolites that are responsible for the anodic peak is presently being studied.     

Parallel coil resonators for time-domain radiofrequency electron paramagnetic resonance imaging of biological objects

Resonators suitable for time-domain electron paramagnetic resonance spectroscopy and imaging at a radiofrequency capable of accommodating experimental animals such as mice are described. Design considerations included B(1) field homogeneity, optimal Q, spectral bandwidth, resonator ring-down, and sensitivity. Typically, a resonator with 25-mm diameter and 25-mm length was constructed by coupling 11 single loops in parallel with a separation of 2.5 mm. To minimize the resonator ring-down time and provide the necessary spectral bandwidth for in vivo imaging experiments, the Q was reduced predominantly by overcoupling. Capacitative coupling was utilized to minimize microphonic effects. The B(1) field in the resonator was mapped both radially and axially and found to be uniform and adequate for imaging studies. Imaging studies with phantom objects containing a narrow-line spin probe as well as in vivo objects administered with the spin probe show the suitability of these resonators for valid reproduction of the spin probe distribution in three dimensions. The fabrication of such resonators is simple and can be scaled up with relative ease to accommodate larger objects as well.     

High-speed data acquisition system and receiver configurations for time-domain radiofrequency electron paramagnetic resonance spectroscopy and imaging

Design strategies, system configuration, and operation of a dual-channel data acquisition system for a radiofrequency (RF) time-domain electron paramagnetic resonance (EPR) spectrometer/imager operating at 300 MHz are described. This system wasconfigured to incorporate high-speed analog-to-digital conversion (ADC) and summation capabilities with both internal and external triggering via GPIB interface. The sampling rate of the ADC is programmable up to a maximum of 1 GS/s when operating in a dual-channel mode or 2 GS/s when the EPR data are collected in a single-channel mode. By using high-speed flash ADCs, a pipelined 8-bit adder, and a 24-bit accumulator, a repetition rate of 230 kHz is realized to sum FIDs of 4096 points. The record length is programmable up to a maximum of 8K points and a large number of FIDs (2(24)) can be summed without overflow before the data can be transferred to a host computer via GPIB interface for further processing. The data acquisition system can operate in a two-channel (quadrature) receiver mode for the conventional mixing to baseband. For detection using the single-channel mode, the resonance signals around the center frequency of 300 MHz were mixed with a synchronized local oscillator of appropriate frequency leading to an intermediate frequency (IF) which is sampled at a rate of 2 GS/s. Comparison of quadrature-mode and an IF-mode operation for EPR detection is presented by studying the FID signal intensity across a bandwidth of 10 MHz and as a function of transmit RF power. Imaging of large-sized phantoms accommodated in appropriately sized resonators indicates that IF-mode operation can be used to obtain distortion-free images in resonators of size 50 mm diameter and 50 mm length.     

Main-chain liquid crystalline copolymers: synthesis and comparative study of the mesomorphic properties and non-linear optical properties

Linear main-chain polymers (P1, P2 and P3) have been synthesised and characterised. The polymers were designed to understand the rigidity of the mesogen’s linking groups and its effect on transition temperature. The liquid crystalline behaviour of these polymers was investigated using polarised optical microscopy and differential scanning calorimetry. All polymers exhibited phase transition on heating and cooling runs. The mesophase stability decreases with the decrease of rigidity of the second mesogen (P2>P1>P3). Similarly, the enthalpy and entropy changes are dependent on the rigidity of the second mesogen (Mesogen B). Polymer P1 undergoes photoisomerisation under UV-visible light irradiation and it attains a photo-stationary state at 275 s. This provides an opportunity to investigate the third-order non-linear optical properties. The non-linear behaviour of polymer P1 in chloroform presents a distinct deviation in a different concentration, where polymer P1 also exhibits a negative non-linear refractive index. Thus, polymer P1 can be used as a potential candidate for optical device applications such as optical limiters.     

Enhanced photocatalytic degradation of monocrotophos in aqueous solution over titania hybridised with beta-zeolite

Photocatalytic degradation of monocrotophos has been carried out in a slurry type batch reactor. The reaction variables were optimised to obtain maximum degradation efficiency. The degradation rate of monocrotophos is significantly higher for acidic solutions than for alkaline solutions. It is also observed that the high concentration environment of the pollutant formed around the hybridised TiO2, enhances the mineralisation rate of monocrotophos. Hence an increase in relative photonic efficiency is obtained.     

A Cobalt(I) Pincer Complex with an η2‐Caryl−H Agostic Bond: Facile C−H Bond Cleavage through Deprotonation,Radical Abstraction,and Oxidative Addition

The synthesis and reactivity of a Co^I pincer complex [Co(?³P,CH,P‐P(CH)P^NMe‐iPr)(CO)₂]⁺ featuring an η²‐ C_aryl?H agostic bond is described. This complex was obtained by protonation of the Co^I complex [Co(PCP^NMe‐iPr)(CO)₂]. The Co^III hydride complex [Co(PCP^NMe‐iPr)(CNtBu)₂(H)]⁺ was obtained upon protonation of [Co(PCP^NMe‐iPr)(CNtBu)₂]. Three ways to cleave the agostic C?H bond are presented. First, owing to the acidity of the agostic proton, treatment with pyridine results in facile deprotonation (C?H bond cleavage) and reformation of [Co(PCP^NMe‐iPr)(CO)₂]. Second, C?H bond cleavage is achieved upon exposure of [Co(?³P,CH,P‐P(CH)P^NMe‐iPr)(CO)₂]⁺ to oxygen or TEMPO to yield the paramagnetic Co^II PCP complex [Co(PCP^NMe‐iPr)(CO)₂]⁺. Finally, replacement of one CO ligand in [Co(?³P,CH,P‐P(CH)P^NMe‐iPr)(CO)₂]⁺ by CNtBu promotes the rapid oxidative addition of the agostic η²‐C_aryl?H bond to give two isomeric hydride complexes of the type [Co(PCP^NMe‐iPr)(CNtBu)(CO)(H)]⁺.     

New quaternary phosphonium salt as multi-site phase-transfer catalyst for various alkylation reactions

The present work describes the C-alkylation reactions of fluorene and curcumin catalyzed by a new phosphonium salt, benzene-1,3,5-triyltris(methylene))tris(triphenylphosphonium)bromide, as a multi-site phase-transfer catalyst (MPTC). The catalytic efficiencies were found to be quite effective for di- and tetra-alkylation reactions with very excellent yields under mild base and low concentrations of the catalyst. The synthesized MPTC 3 have privileged catalytic activity compared to commercially available single-site phase-transfer catalysts.